Ruijie RG-AP880(TR) Wireless Access Point RGOS11.9(6)W1B1 Firmware
|
|
|
|
||
|
|
||||
|
|
Ruijie RG-WLAN Series Access Points AP_RGOS11.9(6)W1B1 |
|
||
|
|
Release Notes |
|
||
|
|
|
|||
| Document Version: V1.4 Date: 2022-06-02 Copyright © 2022 Ruijie Networks |
|
|||
W1B1 (V1.4)/Ruijie%20RG-WLAN%20Series%20Access%20Points%20Release%20Notes,%20AP_RGOS11.9(6)W1B1%20(V1.4).files/image011.jpg){kind=small}
Copyright © 2022 Ruijie Networks
All rights are reserved in this document and this statement.
Any reproduction, excerption, backup, modification, transmission, translation or commercial use of this document or any portion of this document, in any form or by any means, without the prior written consent of Ruijie Networks is prohibited.
Trademark W1B1 (V1.4)/Ruijie%20RG-WLAN%20Series%20Access%20Points%20Release%20Notes,%20AP_RGOS11.9(6)W1B1%20(V1.4).files/image012.jpg){kind=small}
and W1B1 (V1.4)/Ruijie%20RG-WLAN%20Series%20Access%20Points%20Release%20Notes,%20AP_RGOS11.9(6)W1B1%20(V1.4).files/image013.jpg){kind=small}
are owned by Ruijie Networks.
All other trademarks or registered trademarks mentioned in this document are owned by their respective owners.
Disclaimer
The products, services, or features you purchase are subject to commercial contracts and terms. Some or all of the products, services or features described in this document may not be within the scope of your purchase or use. Unless otherwise agreed in the contract, Ruijie Networks does not make any express or implied statement or guarantee for the content of this document.
Due to product version upgrades or other reasons, the content of this document will be updated from time to time. Ruijie Networks reserves the right to modify the content of the document without any notice or prompt.
This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy and will not shoulder any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.
Intended Audience
This document is intended for:
l Network engineers
l Technical support and servicing engineers
l Network administrators
Technical Support
l Ruijie Networks Website: https://www.ruijienetworks.com/
l Technical Support Website: https://ruijienetworks.com/support
l Case Portal: https://caseportal.ruijienetworks.com
l Community: https://community.ruijienetworks.com
l Technical Support Email: service_rj@ruijienetworks.com
l Skype: service_rj@ruijienetworks.com
Conventions
1. Conversions
| Convention |
Description |
| Bold font |
Commands, command options, and keywords are in bold font. |
| Italic font |
Arguments for which you supply values are in italic font. |
| [ ] |
Elements in square brackets are optional. |
| { x | y | z } |
Alternative keywords are grouped in braces and separated by vertical bars. |
| [ x | y | z ] |
Optional alternative keywords are grouped in brackets and separated by vertical bars. |
| &<1-n> |
The argument before the sign (&) can be input for consecutive 1- n times. |
| // |
Double slashes at the beginning of a line of code indicate a comment line. |
1. Signs
The signs used in this document are described as follows:
W1B1 (V1.4)/Ruijie%20RG-WLAN%20Series%20Access%20Points%20Release%20Notes,%20AP_RGOS11.9(6)W1B1%20(V1.4).files/image005.png){kind=small}
Warning
An alert that calls attention to important rules and information that if not understood or followed can result in data loss or equipment damage.
W1B1 (V1.4)/Ruijie%20RG-WLAN%20Series%20Access%20Points%20Release%20Notes,%20AP_RGOS11.9(6)W1B1%20(V1.4).files/image003.png){kind=small}
Caution
An alert that calls attention to essential information that if not understood or followed can result in function failure or performance degradation.
W1B1 (V1.4)/Ruijie%20RG-WLAN%20Series%20Access%20Points%20Release%20Notes,%20AP_RGOS11.9(6)W1B1%20(V1.4).files/image001.png){kind=small}
Note
An alert that contains additional or supplementary information that if not understood or followed will not lead to serious consequences.
W1B1 (V1.4)/Ruijie%20RG-WLAN%20Series%20Access%20Points%20Release%20Notes,%20AP_RGOS11.9(6)W1B1%20(V1.4).files/image002.png){kind=small}
Specification
An alert that contains a description of product or version support.
Contents
1 Version Information
| Version Number |
AM_RGOS11.9(6)W1B1 |
| Version Type |
Official release |
| Applicable Products |
RG-AP180 series RG-AP820 series RG-AP840 series RG-AP850 series RG-AP880 series RG-AP680 series i-Share+ series
AC Version: AC_RGOS11.9(6)B2 or later Note: The APs can connect to ACs not in AC_RGOS11.9(6)W1B1 or later versions, but the new features in this release are unavailable. |
| Applicable Clients |
Common |
| Release Type |
Official release |
| Release Date |
2022-06-02 |
| Based Version Number |
AP_RGOS11.9(6)B9, Release(09150411) |
| Scenario Description |
Common features enhanced |
2 Revision History
| Release Date |
Version Number |
Status |
| 2022-02-11 |
AP_RGOS11.9(6)W1B1, Release(0914xxxx) |
Upgrade is required. |
| 2022-03-07 |
AP_RGOS11.9(6)W1B1, Release(0915xxxx) |
Upgrade is required. |
| 2022-04-01 |
AP_RGOS11.9(6)W1B1, Release(0916xxxx) |
Upgrade is required. |
| 2022-05-13 |
AP_RGOS11.9(6)W1B1, Release(0917xxxx) |
Discarded |
3 Feature Description
1.1 New Features
| Feature |
Source of Demand |
Description |
| WPA3 |
Market |
This latest wireless security standard supports only personal version and enterprise version at present and does not support OWE. |
| Reverse SSH tunnel |
Internal |
The MACC and WIS can access the Telnet and EWEB of APs through the reverse SSH tunnel. |
| Key packet tracking |
Internal |
This feature tracks and records key communication packets of STAs and can export them in PCAP format. |
| Security |
Market |
HTTPS third-party certificates can be imported. This prevents security prompts on the EWEB login interface. |
| WLAN |
Internal |
Radio configuration commands such as TxBF and AMSDU are added. |
1.2 Modified Features
| Feature |
Source of Demand |
Change Description |
| Country code |
Market |
Country codes are supplemented. |
| EWEB |
Market |
1.11 protocol configuration is supported. |
| WIS |
Internal |
DHCP packet interaction parsing is added. |
4 Resolved Issues
| Issue ID |
Description |
| BUG-773542 |
AP850 crashes occasionally. |
| BUG-761407 |
For STAs whose MAC addresses match the format of xxxx.0800.xxxx, the uplink packets are misjudged as 802.3 packets, causing connection failure. |
| BUG-758428 |
When the data-plane arp-control command is run on an AC, some AP configurations lose. |
| BUG-754496 |
CPU idle crashes occasionally occur on APs in idle status. |
| BUG-747630 |
In the case of a power failure, the configuration of the auto-cfg save file flash:speed.txt function may change to 0 bytes, causing configuration loss and communication exceptions. |
| QC-56478 |
AM5528 port flapping causes MAC entry aging failure. |
| QC-55631 |
Power-on failures occasionally occur on MAP852-SF. |
| QC-58089 |
Simplified optical i-Share AM host and MAP high-concurrency going-online fails. |
| QC-58673 |
Many MAPs go offline at Guangxi Vocational Normal University. |
| QC-58987 |
In layer-3 roaming, large packets are lost due to abnormal fragmentation in the roaming tunnel. |
5 Known Issues
N/A
6 Compatibility Description
1.1 Hardware Description
The following table lists the models and version numbers of hardware supported by the current release.
| Model |
Hardware Version Number |
Description |
| RG-AM5514 |
V1.xx |
Dedicated master AP for i-Share+ solution, supporting 12 micro AP RF modules, supporting power supply modes of HPoE and adapter, no fan, two 1G uplink ports |
| RG-AM5528(EP) |
V1.xx |
Dedicated master AP for i-Share+ solution, supporting 24 micro AP RF modules, two 1G and two 10G uplink ports, supporting connection to micro AP RF modules, IoT devices, and zero-roaming devices through the downlink ports, overall power of 600 W |
| RG-AM5528 |
V1.xx |
Dedicated master AP for i-Share+ solution, supporting 24 micro AP RF modules, supporting adapter power supply, two 1G and two 10G uplink ports |
| RG-AM5528(ES) |
V1.xx |
Dedicated master AP for i-Share+ solution, noise-free supporting 24 micro AP RF modules, two 1G and two 10G uplink ports, fit mode supported |
| RG-AM5532 |
V1.xx |
Dedicated master AP for i-Share+ solution, supporting 24 micro AP RF modules, supporting four 1G, four 10G, and two 1G and two 10G uplink ports, supporting PoE/PoE+. |
| RG-AM5552-SF |
V1.xx |
All-optical i-Share+ host, supporting 48 × 1G optical ports connecting to 48 all-optical i-Share+ compact cards, supporting four uplink 10G optical ports |
| RG-AP180-A |
V1.xx |
Wireless access point, one 1G WAN port, four 1G LAN ports, built-in antenna, supporting dual-radio in 2.4G+5G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols |
| RG-AP180-A |
V2.xx |
Wireless access point, one 1G WAN port, four 1G LAN ports, built-in antenna, supporting dual-radio in 2.4G+5G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols |
| RG-AP180-A |
V3.xx |
Wireless access point, one 1G WAN port, four 1G LAN ports, built-in antenna, supporting dual-radio in 2.4G+5G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols |
| RG-AP180 |
V1.xx |
Wireless access point, one 1G WAN port, four 1G LAN ports, built-in antenna, supporting dual-radio in 2.4G+5G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols |
| RG-AP180-L |
V1.xx |
Wireless access point, supporting dual-radio 2×2 in 2.4G (802.11ax) + 5G (802.11ax) modes with a maximum access rate of 574 Mbps + 1201 Mbps, supporting DC and 802.3af PoE power supply, RJ45 Console management interface, built-in antennas, and 1G wired ports |
| RG-AP180-L-A |
V1.xx |
Wireless access point, supporting dual-radio 2×2 in 2.4G (802.11ax) + 5G (802.11ax) modes with a maximum access rate of 574 Mbps + 1201 Mbps, supporting DC and 802.3af PoE power supply, RJ45 Console management interface, built-in antennas, and 1G wired ports |
| RG-AP180-L |
V2.xx |
Wireless access point, supporting dual-radio 2×2 in 2.4G (802.11ax) + 5G (802.11ax) modes with a maximum access rate of 574 Mbps + 1201 Mbps, supporting DC and 802.3af PoE power supply, RJ45 Console management interface, built-in antennas, and 1G wired ports |
| RG-AP180-L-A |
V2.xx |
Wireless access point, supporting dual-radio 2×2 in 2.4G (802.11ax) + 5G (802.11ax) modes with a maximum access rate of 574 Mbps + 1201 Mbps, supporting DC and 802.3af PoE power supply, RJ45 Console management interface, built-in antennas, and 1G wired ports |
| RG-AP180 |
V2.xx |
Wireless access point, one 1G WAN port, four 1G LAN ports, built-in antenna, supporting dual-radio in 2.4G+5G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols |
| RG-AP180 |
V3.xx |
Wireless access point, one 1G WAN port, four 1G LAN ports, built-in antenna, supporting dual-radio in 2.4G+5G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols |
| RG-AP180 |
V4.xx |
Wireless access point, one 1G WAN port, four 1G LAN ports, built-in antenna, supporting dual-radio in 2.4G+5G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols |
| RG-AP680(CD) |
V1.xx |
Wireless access point, one 1G uplink port, one 1G optical port, built-in directional antenna, supporting dual-radio in 2.4G+5G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols and Bluetooth serial ports |
| RG-AP680(CD)-A |
V1.xx |
Wireless access point, one 1G uplink port, one 1G optical port, built-in directional antenna, supporting dual-radio in 2.4G+5G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols and Bluetooth serial ports |
| RG-AP680-A |
V1.xx |
Wireless access point, one 1G uplink port, one 1G optical port, built-in omnidirectional antenna, supporting dual-radio in 2.4G+5G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols and Bluetooth serial ports |
| RG-AP680-A(V2) |
V1.xx |
Wireless access point, one 1G uplink port, one 1G optical port, built-in omnidirectional antenna, supporting dual-radio in 2.4G+5G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols and Bluetooth serial ports |
| RG-AP680(CD)-M |
V1.xx |
Wireless access point, one 1G uplink port, one 1G optical port, built-in omnidirectional antenna, supporting dual-radio in 2.4G+5G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols and Bluetooth serial ports |
| RG-AP820-A |
V1.xx |
Wireless access point, one 1G WAN port, built-in antenna, supporting dual-radio in 2.4G+5G modes with 2×2+2×2 spatial streams and a maximum access rate of 574 Mbps + 1201 Mbps, supporting 802.11a/b/g/n/ac/ax protocols, supporting DC and 802.3af PoE power supply, and RJ45 Console management interface |
| RG-AP820(AR) |
V1.xx |
Wireless access point, three 1G uplink ports, built-in antenna, supporting dual-radio in 2.4G+5G or 5.2G+5.8G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols The third AI Radio supports security, collection, and network optimization. |
| RG-AP820-L |
V1.xx |
Wireless access point, one 1G WAN port, built-in antenna, supporting 802.11a/b/g/n/ac/ax protocols, supporting dual-radio in 2.4G+5G modes with 2×2+2×2 spatial streams and a maximum access rate of 574 Mbps + 1201 Mbps, supporting DC and 802.3af PoE power supply, and RJ45 Console management interface |
| RG-AP820-L (V2) |
V1.xx |
Wireless access point, one 1G uplink port, built-in antenna, supporting dual-radio in 2.4G+5G or 5.2G+5.8G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols |
| RG-AP820-L (V2) |
V2.xx |
Wireless access point, one 1G uplink port, built-in antenna, supporting dual-radio in 2.4G+5G or 5.2G+5.8G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols |
| RG-AP820-A(V2) |
V1.xx |
Wireless access point, one 1G uplink port, built-in antenna, supporting dual-radio in 2.4G+5G or 5.2G+5.8G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols |
| RG-AP820-A(V2) |
V2.xx |
Wireless access point, one 1G uplink port, built-in antenna, supporting dual-radio in 2.4G+5G or 5.2G+5.8G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols |
| RG-AP820-A(V2) |
V3.xx |
Wireless access point, one 1G uplink port, built-in antenna, supporting dual-radio in 2.4G+5G or 5.2G+5.8G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols |
| RG-AP820-A(X)(V2) |
V1.xx |
Wireless access point, one 1G uplink port, built-in antenna, supporting dual-radio in 2.4G+5G or 5.2G+5.8G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols |
| RG-AP820-A(X)(V2) |
V2.xx |
Wireless access point, one 1G uplink port, built-in antenna, supporting dual-radio in 2.4G+5G or 5.2G+5.8G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols |
| RG-AP820-A(X)(V2) |
V3.xx |
Wireless access point, one 1G uplink port, built-in antenna, supporting dual-radio in 2.4G+5G or 5.2G+5.8G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols |
| RG-AP840-I |
V1.xx |
Wireless access point, two 1G uplink ports + one 1G IoT port, built-in antenna, supporting dual-radio in 2.4G+5G modes with 2×2+4×4 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols |
| RG-AP850(AR) |
V1.xx |
Wireless access point, one 2.5G uplink port + one 1G IoT port, built-in antenna, supporting dual-radio in 2.4G+5G+5G modes with 2×2+2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols The fourth AI Radio supports security, collection, and network optimization. |
| RG-AP850-AR(V2) |
V1.xx |
Wireless access point, one 2.5G uplink port + one 1G optical port + one 1G IoT port, built-in antenna, supporting dual-radio in 2.4G+5G+5G modes with 2×2+2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols The fourth AI Radio supports security, collection, and network optimization. |
| RG-AP850-I |
V1.xx |
Wireless access point, two 1G uplink ports + one 1G IoT port, built-in antenna, supporting dual-radio in 2.4G+5G+5G modes with 2×2+2×2+4×4 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols |
| RG-AP850(DA) |
V1.xx |
Wireless access point, two 1G uplink ports + one 1G IoT port, built-in antenna, supporting dual-radio in 2.4G+5G+5G modes with 2×2+2×2+4×4 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols |
| RG-AP850-I |
V2.xx |
Wireless access point, two 1G uplink ports + one 1G IoT port, built-in antenna, supporting dual-radio in 2.4G+5G+5G modes with 4×4+4×4+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols |
| RG-AP850-I(V2) |
V1.xx |
Wireless access point, two 1G uplink ports + one 1G IoT port, built-in antenna, supporting dual-radio in 2.4G+5G+5G modes with 4×4+4×4+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols |
| RG-AP860-I |
V1.xx |
Wireless access point, two 5G uplink ports + one 1G IoT port, built-in antenna, supporting dual-radio in 2.4G+5G+5G modes with 2×2+4×4+4×4 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols |
| RG-AP880(TR) |
V1.xx |
Wireless access point, two 5G uplink ports + one 1G IoT port, built-in antenna, supporting dual-radio in 2.4G+5G+5G modes with 2×2+4×4+4×4 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols |
| RG-MAP852-SF |
V1.xx |
All-optical i-Share+ compact card, one 1G optical port, built-in antenna, supporting dual-radio in 2.4G+5G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols |
| RG-MAP852-SF |
V2.xx |
All-optical i-Share+ compact card, one 1G optical port, built-in antenna, supporting dual-radio in 2.4G+5G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols |
| RG-MAP852 |
V1.xx |
i-Share+ compact card, built-in antenna, supporting dual-radio in 2.4G+5G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols |
| RG-MAP852 |
V2.xx |
i-Share+ compact card, built-in antenna, supporting dual-radio in 2.4G+5G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols |
| RG-MAP852 |
V3.xx |
i-Share+ compact card, built-in antenna, supporting dual-radio in 2.4G+5G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols |
7 Upgrade Instructions
1.1 Upgrade Files
1.1.1 RG-AP180 Series
| File Name |
AP_RGOS11.9(6)W1B1_S2X2-09_09180101_install.bin |
| Description |
Upgrade package (common version) |
| Size |
23364771 bytes |
| Applicable Products |
RG-AP180 V2.xx RG-AP180 V3.xx RG-AP180 V4.xx |
| MD5 |
b8f7026328ab195f5abc9400cb9911fc |
| Software Version |
AP_RGOS11.9(6)W1B1, Release(09180101) |
1.1.2 RG-AP820 Series
| File Name |
AP_RGOS11.9(6)W1B1_S2X2-05_09180101_install.bin |
| Description |
Upgrade package (common version) |
| Size |
25272807 bytes |
| Applicable Products |
RG-AP820-L(V2) V2.xx[f1] |
| MD5 |
840b92553ad738a3d7e2133fc6c13e03 |
| Software Version |
AP_RGOS11.9(6)W1B1, Release(09180101) |
| File Name |
AP_RGOS11.9(6)W1B1_S2X2-12_09180101_install.bin |
| Description |
Upgrade package (common version) |
| Size |
28339737 bytes |
| Applicable Product |
RG-AP820(AR) V1.xx |
| MD5 |
443d7bb59a04092c3ce4ae1d7704c811 |
| Software Version |
AP_RGOS11.9(6)W1B1, Release(09180101) |
1.1.3 RG-AP840 Series
| File Name |
AP_RGOS11.9(6)W1B1_S2X4-01_09173122_install.bin |
| Description |
Upgrade package (common version) |
| Size |
27909352 bytes |
| Applicable Product |
RG-AP840-I V1.xx |
| MD5 |
38db21a18c89f261b4e3b4c5dd526b4d |
| Software Version |
AP_RGOS11.9(6)W1B1, Release(09173122) |
1.1.4 RG-AP850 Series
| File Name |
AP_RGOS11.9(6)W1B1_S2X4-04_09173122_install.bin |
| Description |
Upgrade package (common version) |
| Size |
27145974 bytes |
| Applicable Products |
RG-AP850-I(V2) V1.xx |
| MD5 |
9f75288885c01ae6adf14019b2325186 |
| Software Version |
AP_RGOS11.9(6)W1B1, Release(09173122) |
1.1.5 RG-AP880 Series
| File Name |
AP_RGOS11.9(6)W1B1_S2X4-02_09173123_install.bin |
| Description |
Upgrade package (common version) |
| Size |
27905335 bytes |
| Applicable Products |
RG-AP880(TR) V1.xx |
| MD5 |
b34d8726a2a86e87635f26782a93f22c |
| Software Version |
AP_RGOS11.9(6)W1B1, Release(09173123) |
1.1.6 RG-AP680 Series
| File Name |
AP_RGOS11.9(6)W1B1_S2X2-06_09180101_install.bin |
| Description |
Upgrade package (common version) |
| Size |
25735897 bytes |
| Applicable Products |
RG-AP680(CD) V1.xx |
| MD5 |
dc49e45fc819afe9c80c20d5ac2b6437 |
| Software Version |
AP_RGOS11.9(6)W1B1, Release(09180101) |
1.1.7 i-Share+ Series
| File Name |
AP_RGOS11.9(6)W1B1_S2X2-03_09180101_install.bin |
| Description |
Upgrade package (common version) |
| Size |
17968090 bytes |
| Applicable Products |
RG-MAP852 V1.xx RG-MAP852 V2.xx RG-MAP852 V3.xx |
| MD5 |
a5b86910ceae1e7f32e52cabb46a7355 |
| Software Version |
AP_RGOS11.9(6)W1B1, Release(09180101) |
1.2 Upgrade Requirements
N/A
1.3 Precautions
l Upgrade can be performed on site only after successful experimental verification.
l Please perform a database backup before upgrading the device.
l If a prompt message appears during the upgrade, indicating that restart is not allowed, do not power off the device, reset the system, or plug in/unplug any module.
l During the upgrade and downgrade, pay attention to the prompt messages. If failures occur, please save the log and contact us for technical assistance.
l After the upgrade and downgrade, run the show version detail command to check the current device version. If it is the target version, the upgrade succeeds.
8 Related Documentation
Note
The related documents are subject to change or update without prior notification. For details, please log in to the official website of Ruijie Networks: http://www.ruijienetworks.com/
[f1]保留
Thank you. We will inform you of our response as soon as possible. 
