Compare Products


Clear All


Time: August 16th, 2023

Knowing how to connect switch to router is quite essential to enter the ethernet network. In this blog, we’ll provide a step-by-step guide to help you achieve it.

Why Connect a Switch to a Router?

A switch acts as a hub, expanding the number of available Ethernet ports, while a router serves as the gateway to the internet, facilitating communication between devices and networks. By connecting a switch to a router, you unlock the potential for seamless networking, enabling multiple devices to access the internet and communicate with each other effortlessly.

Step-by-Step Guide to Connect a Switch to a Router

Step 1: Gather the Required Equipment

Before embarking on the connection process, ensure you have an Ethernet cable, as well as the switch and router ready for setup. These components form the backbone of your network infrastructure.

Step 2: Power Off the Devices

To ensure safety and prevent any potential damage, power off both the switch and the router before making any connections. This precautionary measure safeguards against electrical mishaps during the setup process.

Step 3: Identify Ethernet Ports

Locate the Ethernet ports on both the switch and the router. These ports are typically labeled with indicators like "LAN," "Ethernet," or similar designations. Take a moment to familiarize yourself with the physical layout of each device.

Step 4: Connect the Ethernet Cable

Take one end of the Ethernet cable and insert it firmly into an available Ethernet port on the switch. Then, connect the other end of the cable to an available Ethernet port on the router. Ensure a secure and snug fit to establish a reliable connection.

Step 5: Power on the Devices

With the Ethernet cable connected, power on both the switch and the router. Allow the devices to boot up fully, as this process initializes their functionalities and prepares them for proper communication.

Step 6: Verify the Connection

To confirm a successful connection, check the indicator lights on both the switch and the router. These LED lights provide valuable insights into the network status. Typically, when a connection is established, the corresponding LED lights on both devices will illuminate, indicating a successful link.

Step 7: Configure Network Settings (If required)

In some cases, you may need to configure network settings on the switch or router to optimize performance or establish specific requirements. Refer to the user manuals or documentation provided by the manufacturers to access the configuration interfaces and adjust settings accordingly.

By following these step-by-step instructions, you have successfully connected your switch to the router. Here, you may be concerned about another issue: How to configure router settings?

Configuring router settings can vary depending on the specific router model and manufacturer. However, here are some general steps to guide you through the process:

1. Connect to the router: Ensure that your computer or device is connected to the router either via an Ethernet cable or through a Wi-Fi connection. Make sure you have a stable connection before proceeding.

2. Access the router's web interface: Open a web browser and enter the router's default IP address in the address bar. Common default IP addresses include,, or You can find the specific default IP address in the router's documentation or on the manufacturer's website.

3. Enter login credentials: You will be prompted to enter the router's login credentials. This information is usually provided on a sticker attached to the router or in the documentation. The default username and password are often "admin" or left blank. If you have changed these credentials in the past and don't remember them, you may need to perform a factory reset on the router.

4. Navigate the router's configuration interface: Once logged in, you will have access to the router's configuration interface. The layout and options may vary depending on the router model. Common settings you can configure include:

  • Wireless settings: Set the network name (SSID) and password for your Wi-Fi network, select the Wi-Fi encryption method (e.g., WPA2), and configure other wireless network options.
  • Network settings: Configure the router's IP address, subnet mask, and DNS settings. You can choose between static or dynamic IP addressing.
  • Security settings: Set up firewall rules, enable or disable port forwarding, and configure other security measures like MAC address filtering.
  • Quality of Service (QoS): Prioritize specific types of network traffic to ensure a better experience for applications like online gaming or video streaming.
  • Parental controls: Restrict or manage access to certain websites or control internet usage for specific devices.
  • Firmware updates: Check for and install firmware updates to ensure your router has the latest security patches and features.

 5. Save and apply changes: After making any desired configurations, save the changes in the router's interface. The router may need to restart for the new settings to take effect.

Ruijie Networks websites use cookies to deliver and improve the website experience.

See our cookie policy for further details on how we use cookies and how to change your cookie settings.

Cookie Manager

When you visit any website, the website will store or retrieve the information on your browser. This process is mostly in the form of cookies. Such information may involve your personal information, preferences or equipment, and is mainly used to enable the website to provide services in accordance with your expectations. Such information usually does not directly identify your personal information, but it can provide you with a more personalized network experience. We fully respect your privacy, so you can choose not to allow certain types of cookies. You only need to click on the names of different cookie categories to learn more and change the default settings. However, blocking certain types of cookies may affect your website experience and the services we can provide you.

  • Performance cookies

    Through this type of cookie, we can count website visits and traffic sources in order to evaluate and improve the performance of our website. This type of cookie can also help us understand the popularity of the page and the activity of visitors on the site. All information collected by such cookies will be aggregated to ensure the anonymity of the information. If you do not allow such cookies, we will have no way of knowing when you visited our website, and we will not be able to monitor website performance.

  • Essential cookies

    This type of cookie is necessary for the normal operation of the website and cannot be turned off in our system. Usually, they are only set for the actions you do, which are equivalent to service requests, such as setting your privacy preferences, logging in, or filling out forms. You can set your browser to block or remind you of such cookies, but certain functions of the website will not be available. Such cookies do not store any personally identifiable information.

Accept All

View Cookie Policy Details

Contact Us

Contact Us

How can we help you?

Contact Us

Get an Order help

Contact Us

Get a tech support