Compare Products

Hide

Clear All

VS

RG-AP680(CD) Wireless - 1
RG-AP680(CD) Wireless - 2
RG-AP680(CD) Wireless - 3
RG-AP680(CD) Wireless - 4
RG-AP680(CD) Wireless - 5
RG-AP680(CD) Wireless - 6
RG-AP680(CD) Wireless - 7
RG-AP680(CD) Wireless - 8
RG-AP680(CD) Wireless - 9
RG-AP680(CD) Wireless - 10
RG-AP680(CD) Wireless - 1
RG-AP680(CD) Wireless - 2
RG-AP680(CD) Wireless - 3
RG-AP680(CD) Wireless - 4
RG-AP680(CD) Wireless - 5
RG-AP680(CD) Wireless - 6
RG-AP680(CD) Wireless - 7
RG-AP680(CD) Wireless - 8
RG-AP680(CD) Wireless - 9
RG-AP680(CD) Wireless - 10
Picture

RG-AP680(CD), Wi-Fi 6 Dual Radio 2.402 Gbps Outdoor High Power Wireless AP

Recommended for outdoor scenarios such as higher education, wireless city, energy sector, and commercial complexes, delivering good connectivity in the extreme-weather environments at longer distances.

Models
Series
Highlight Features
  • Industrial-rated design, IP68 rating, 9 kV surge protection, and a wide operating temperature range (–40°C to +65°C)
  • Optical port and electrical port for flexible networking
  • 2.402 Gbps ultra-fast speed with Wi-Fi 6
  • Ruijie cloud management, intelligent optimization
Sales Enquiry
Key Specification View More
Features

RG-AP680(CD) Outdoor Wireless Access Point

Ports

Dimensions

2.4 GHz/5 GHz and 5 GHz/5 GHz
dual-radio design

Max. frame rate
2.402 Gbps

IP68 rating

Bluetooth 5.0

DC and PoE power input

Industrial-rated Design, Purposefully Built for Outdoor
Harsh Environments

IP68 Rating

Surge Protection

Wide Operating Temperature Range

The highest protection against solid ingress and water ingress, resisting water, dust and sand.

1 Gbps Optical Port and 1 Gbps Electrical Port Deliver Maximum Networking Flexibility

1 Gbps Optical Port

It supports i-Share+ Solution, covering a range of over one kilometer for AP deployment.

1 Gbps Electrical Port

Network cable connection is supported, meeting existing networking requirements.

Ultra-Fast Speed and Capacity with Wi-Fi 6

2.402
Gbps
Hight Concurrency
OFDMA and MU-MIMO technologies are introduced for multi-STA stable connection.
Low Latency
OFDMA supports concurrent data transfer to multiple STAs at a latency as low as 20 ms.
High security
WPA3 is used to dramatically increase wireless security.
High Speed
1024QAM modulation delivers a 25% increase in data rate compared with IEEE 802.11ac.

Cloud, Making Your Business Easy

Remote monitoring
Remote Wi-Fi management
Cloud portal authentication
Wireless intelligent optimization
Specifications

Hardware Specifications

Dimensions and Weight

RG-AP680(CD)

Unit dimensions(W x D x H)

251 mm x 168 mm x 64 mm (9.88 in. x 6.61 in. x 2.52 in.)

Shipping dimensions(W x D x H)

405 mm x 232 mm x 325 mm (15.94 in. x 9.13 in. x 12.80 in.)

Unit weight

Main unit: 1.5 kg (3.31 lbs)

Mounting bracket: 0.2 kg (0.44 lbs)

Shipment weight

2.92 kg (6.44 lbs)

Mounting

Wall/Pole-mount (a mounting bracket is delivered with the main unit)

 

Wi-Fi Radio

RG-AP680(CD)

Radio design

Dual-radio and up to four spatial streams:

● Radio 1: 2.4 GHz/5 GHz, two spatial streams, 2x2 MU-MIMO

● Radio 2: 5 GHz, two spatial streams, 2x2 MU-MIMO

Operating frequencies

Radio 1: 802.11b/g/n/ax

● 2.400 GHz to 2.4835 GHz, channels 1 to 13

Radio 2: 802.11a/n/ac/ax

● 5.150 GHz to 5.250 GHz, U-NII-1, channels 36, 40, 44, and 48

● 5.250 GHz to 5.350 GHz, U-NII-2A, channels 52, 56, 60, and 64

● 5.470 GHz to 5.725 GHz, U-NII-2C, channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, and 140

● 5.725 GHz to 5.850 GHz, U-NII-3/ISM, channels 149, 153, 157, 161, and 165

Note: Available frequency bands may vary with countries or regions. To use the above-mentioned frequency bands, ensure that they are supported in your country or region. For details, see WLAN Country or Region Codes and Channel Compliance.

Data rates

Combined peak date rate for 2.4 GHz and 5 GHz radios: 1.775 Gbps

Combined peak date rate for 5 GHz and 5 GHz radios: 2.402 Gbps

Radio 1:

2.4 GHz: 574 Mbps

● Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client devices (maximum)

● Two spatial stream Single User (SU) MIMO for up to 287 Mbps wireless data rate to individual 2SS HE20 802.11ax client devices (typical)

5 GHz: 1.201 Gbps

● Two spatial stream Single User (SU) MIMO for up to 1.201 Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (maximum)

● Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client devices (typical)

● Two spatial stream Multi-User (MU) MIMO for up to 1.201 Gbps wireless data rate to up to two 1SS HE80 802.11ax DL-MU-MIMO capable client devices simultaneously (maximum)

● Two spatial stream Multi-User (MU) MIMO for up to 574 Mbps wireless data rate to up to two 1SS HE40 802.11ax DL-MU-MIMO capable client devices simultaneously (typical)

Radio 2: 5 GHz, 1.201 Gbps

● Two spatial stream Single User (SU) MIMO for up to 1.201 Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (maximum)

● Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client devices (typical)

● Two spatial stream Multi-User (MU) MIMO for up to 1.201 Gbps wireless data rate to up to two 1SS HE80 802.11ax DL-MU-MIMO capable client devices simultaneously (maximum)

● Two spatial stream Multi-User (MU) MIMO for up to 574 Mbps wireless data rate to up to two 1SS HE40 802.11ax DL-MU-MIMO capable client devices simultaneously (typical)

Data rate set

The following 802.11-compliant data rates in Mbps are supported:

2.4 GHz radio

● 802.11b: 1, 2, 5.5, 11

● 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54

● 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)

● 802.11ac: 6.5 to 400 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT40)

● 802.11ax: 8.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)

5 GHz radio

● 802.11a: 6, 9, 12, 18, 24, 36, 48, 54

● 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)

● 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT80)

● 802.11ax: 8.6 to 1,200 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE80)

Packet aggregation

802.11n/ac/ax: A-MPDU and A-MSDU

Antenna type

Built-in intelligent antennas

Antenna gain

2.4 GHz: 9 dBi

5 GHz: 9 dBi

Maximum transmit power

2.4 GHz radio: 28 dBm (25 dBm per chain)

5 GHz radio: 28 dBm (25 dBm per chain)

Note: The transmit power is limited by local regulatory requirements. For details, see WLAN Country or Region Codes and Channel Compliance.

 

Thailand

2.400 GHz to 2.4835 GHz: 20 dBm

5.470 GHz to 5.725 GHz: 30 dBm

5.725 GHz to 5.825 GHz: 30 dBm

Power increment

Configurable in increments of 1 dBm

Radio technologies

802.11b: Direct-Sequence Spread-Spectrum (DSSS)

802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)

802.11ax: Orthogonal Frequency Division Multiple Access (OFDMA)

Modulation types

802.11b: BPSK, QPSK, CCK

802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM

 

The following table lists the radio frequency performance of Wi-Fi including different frequency bands, protocols, and date rates. It is country-specific, and Ruijie Networks reserves the right of interpretation.

Wi-Fi Radio Frequency Performance

RG-AP680(CD)

Frequency Band and Protocol

Data Rate

Maximum Transmit Power per Transmit Chain

Maximum Receive Sensitivity per Receive Chain

2.4 GHz 802.11b

1 Mbps

25 dBm

–92 dBm

2 Mbps

25 dBm

–82 dBm

5.5 Mbps

25 dBm

–84 dBm

11 Mbps

25 dBm

–78 dBm

2.4 GHz 802.11g

6 Mbps

25 dBm

–84 dBm

24 Mbps

23 dBm

–74 dBm

36 Mbps

23 dBm

–72 dBm

54 Mbps

20 dBm

–67 dBm

2.4 GHz 802.11n (HT20)

MCS0

25 dBm

–84 dBm

MCS7

20 dBm

–66 dBm

2.4 GHz 802.11n (HT40)

MCS0

25 dBm

–79 dBm

MCS7

20 dBm

–63 dBm

2.4 GHz 802.11ax (HE20)

MCS0

25 dBm

–84 dBm

MCS11

18 dBm

–54 dBm

2.4 GHz 802.11ax (HE40)

MCS0

25 dBm

–80 dBm

MCS11

18 dBm

–51 dBm

5 GHz 802.11a

6 Mbps

25 dBm

–84 dBm

24 Mbps

23 dBm

–74 dBm

36 Mbps

23 dBm

–72 dBm

54 Mbps

20 dBm

–67 dBm

5 GHz 802.11n (HT20)

MCS0

25 dBm

–84 dBm

MCS7

20 dBm

–66 dBm

5 GHz 802.11n (HT40)

MCS0

25 dBm

–81 dBm

MCS7

20 dBm

–63 dBm

5 GHz 802.11ac (VHT20)

MCS0

25 dBm

–84 dBm

MCS9

19 dBm

–61 dBm

5 GHz 802.11ac (VHT40)

MCS0

25 dBm

–81 dBm

MCS9

19 dBm

–56 dBm

5 GHz 802.11ac (VHT80)

MCS0

25 dBm

–78 dBm

MCS9

19 dBm

–53 dBm

5 GHz 802.11ax (HE20)

MCS0

25 dBm

–84 dBm

MCS11

18 dBm

–54 dBm

5 GHz 802.11ax (HE40)

MCS0

25 dBm

–81 dBm

MCS11

18 dBm

–51 dBm

5 GHz 802.11ax (HE80)

MCS0

25 dBm

–78 dBm

MCS11

18 dBm

–48 dBm

 

Bluetooth Radio

RG-AP680(CD)

Bluetooth

Bluetooth 5.0

Antenna type

Integrated omnidirectional antenna

Maximum antenna gain

4.5 dBi

Maximum transmit power

10 dBm

Receive sensitivity

-88 dBm (@BLE)

 

Ports Specifications

RG-AP680(CD)

Fixed service port

1 x 10/100/1000BASE-T port, supporting PoE input

1 x 1GE SFP port

Fixed management port

1 x RJ45 console port (serial console port)

Status LED

1 x multi-color system status LED

3 x single-color RSSI LEDs

Button

1 x Reset button

● Press the button for shorter than 2 seconds. Then the device restarts.

● Press the button for longer than 3 seconds. Then the device restores to factory settings.

 

Power Supply and Consumption

RG-AP680(CD)

Input power supply

The AP supports the following two power supply modes:

● 48 V DC/0.35 A power input over DC connector: The DC connector accepts 2.0 mm/6.3 mm center-positive circular plug. A DC power adapter needs to be purchased independently.

● PoE input over ETH/PoE: The power source equipment (PSE) complies with IEEE 802.3af/at standard (PoE/PoE+).

Note:

If both DC power and PoE are available, DC power is preferred.

Overall power consumption

Maximum power consumption: 12.95 W

● DC powered: 12.95 W

● PoE powered (802.3af): 12.95 W

● PoE+ powered (802.3at): 12.95 W

● PoE++ powered (802.3bt): 12.95 W

● Idle mode: 6.0 W

 

Environment and Reliability

RG-AP680(CD)

Temperature

Operating temperature: –40°C to +65°C (–40°F to +149°F)

Storage temperature: –40°C to +85°C (–40°F to +185°F)

Note: At an altitude in the range of 3,000–5,000 m (9,842.52–16,404.20 ft.), every time the altitude increases by 220 m (722 ft.), the maximum temperature decreases by 1°C (1.8°F).

Humidity

Operating humidity: 0% RH to 100% RH (non-condensing)

Storage humidity: 0% RH to 100% RH (non-condensing)

IP rating

IP68

Mean Time Between Failure (MTBF)

> 250,000 hours

 

Regulatory Compliance

RG-AP680(CD)

Security regulations

IEC 62368-1

EN 62368-1

EN 60950-22

EMC regulations

EN 55032

EN 55035

EN IEC 61000-3-2

EN 61000-3-3

EN 301 489-1

EN 301489-3

EN 301489-17

Radio frequency regulations

EN 300 328

EN 301 893

EN 300 440

EN 62311

EN IEC 62311

EN 50665

FCC Part 15

*For more country-specific regulatory information and approvals, contact your local sales agency.


Software Specifications

Applicable Software Version

RG-AP680(CD)

Applicable software version

RGOS11.9(6)W1B1 or later

 

WLAN

RG-AP680(CD)

Recommended maximum number of active devices per AP

120

Maximum number of associated clients

1024

 Note

The number of associated clients varies according to the environment.

Maximum number of BSSIDs

32 (up to 16 BSSIDs per radio)

STA management

SSID hiding

Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN attributes independently.

Remote intelligent perception technology (RIPT)

Intelligent client identification technology

Intelligent load balancing based on the STA quantity or traffic

STA limiting

SSID-based STA limiting

Radio-based STA limiting

Bandwidth limiting

STA/SSID/AP-based rate limiting

Wireless roaming

Layer 2 and Layer 3 roaming

 

Security

RG-AP680(CD)

Authentication and encryption

Remote Authentication Dial-In User Service (RADIUS)

PSK, web, 802.1X, WPA, WPA2, and WPA3 authentication

SMS authentication (used with the RG-WS series wireless access controller)

MAB authentication (used with the RG-WS series wireless access controller)

WEP (64/128 bits), WPA-Personal, WPA-Enterprise, WPA2-Personal, WPA2-Enterprise, WPA3-Personal (WPA2/WPA3 transition mode), WPA3-Enterprise (CCMP), WPA3-OWE

Data frame filtering

Allowlist, static blocklist, and dynamic blocklist

ACL

Dynamic ACL assignment

CPP

Supported

NFPP

Supported

 

Routing and Switching

RG-AP680(CD)

IP service

Static IPv4 address

IPv4 DHCP client

NAT FTP ALG and NAT DNS ALG

Multicast

Multicast-to-unicast conversion

IPv6 basics

IPv6 addressing, Neighbor Discovery (ND), ICMPv6, IPv6 ping

IPv6 DHCP client

IP routing

IPv4/IPv6 static routing

VPN

PPPoE client

IPsec VPN

 

Management

RG-AP680(CD)

Network management

Fault inspection and alarm

Information statistics and logging

SNMPv1/v2c/v3

NTP Server and NTP Client

Network management platform

Ruijie Cloud

Web-based management (Eweb)

User access management

Console, Telnet, SSH, SNMP and TFTP-based management

Fat/Fit/Cloud mode switchover

When the AP works in Fit mode, it can be switched to Fat mode through an AC.

When the AP works in Fat mode, it can be switched to Fit mode through the console port or Telnet.

When the AP works in Cloud mode, it can be managed through Ruijie Cloud.

Show More
Resources All Resources
Learn about Products or Solutions
Installation
Software and Configuration
Order Information

Model

Description

RG-AP680(CD)

Wi-Fi 6 dual-radio outdoor wireless access point

Up to four spatial streams

Data rate of up to 2.402 Gbps

Compliance with IEEE 802.11a/b/g/n/ac and 802.11ax standards

Fat/Fit/Cloud mode switchover

IEEE 802.3af-compliant power supply and DC power supply

Show More
Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.
How would you rate your experience on this page?
Very disatisfying
Very satisfying
If you would like to offer more comment, please type in the textbox below, that would be helpful for the improvement of this page.
Submit
Thank you for your feedback!

Ruijie Networks websites use cookies to deliver and improve the website experience.

See our cookie policy for further details on how we use cookies and how to change your cookie settings.

Cookie Manager

When you visit any website, the website will store or retrieve the information on your browser. This process is mostly in the form of cookies. Such information may involve your personal information, preferences or equipment, and is mainly used to enable the website to provide services in accordance with your expectations. Such information usually does not directly identify your personal information, but it can provide you with a more personalized network experience. We fully respect your privacy, so you can choose not to allow certain types of cookies. You only need to click on the names of different cookie categories to learn more and change the default settings. However, blocking certain types of cookies may affect your website experience and the services we can provide you.

  • Performance cookies

    Through this type of cookie, we can count website visits and traffic sources in order to evaluate and improve the performance of our website. This type of cookie can also help us understand the popularity of the page and the activity of visitors on the site. All information collected by such cookies will be aggregated to ensure the anonymity of the information. If you do not allow such cookies, we will have no way of knowing when you visited our website, and we will not be able to monitor website performance.

  • Essential cookies

    This type of cookie is necessary for the normal operation of the website and cannot be turned off in our system. Usually, they are only set for the actions you do, which are equivalent to service requests, such as setting your privacy preferences, logging in, or filling out forms. You can set your browser to block or remind you of such cookies, but certain functions of the website will not be available. Such cookies do not store any personally identifiable information.

Accept All

View Cookie Policy Details

Contact Us

Contact Us

How can we help you?

Contact Us

Get an Order help

Contact Us

Get a tech support