Compare Products

Hide

Clear All

VS

Home> Support> Downloads>

RG-CS85 Series Switches RGOS 12.5(4)B0707 Release Notes (V1.3)

2023-05-30 View:

 

 

 

 

Ruijie RG-CS85 Series Switches CS85_RGOS 12.5(4)B0707

 

 

Release Notes

 

 

 

Document Version: V1.3

Date: 2023.05.16

Copyright © 2023 Ruijie Networks

 

 


Copyright

Copyright © 2023 Ruijie Networks

All rights are reserved in this document and this statement.

Any reproduction, excerption, backup, modification, transmission, translation or commercial use of this document or any portion of this document, in any form or by any means, without the prior written consent of Ruijie Networks is prohibited.

Trademark  and  are owned by Ruijie Networks.

All other trademarks or registered trademarks mentioned in this document are owned by their respective owners.

Disclaimer

The products, services, or features you purchase are subject to commercial contracts and terms. Some or all of the products, services or features described in this document may not be within the scope of your purchase or use. Unless otherwise agreed in the contract, Ruijie Networks does not make any express or implied statement or guarantee for the content of this document.

Due to product version upgrades or other reasons, the content of this document will be updated from time to time. Ruijie Networks reserves the right to modify the content of the document without any notice or prompt.

This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy and will not shoulder any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.


Preface

Intended Audience

This document is intended for:

l  Network engineers

l  Technical support and servicing engineers

l  Network administrators

Technical Support

l  Ruijie Networks Website: https://www.ruijienetworks.com/

l  Technical Support Website: https://ruijienetworks.com/support

l  Case Portal: https://caseportal.ruijienetworks.com

l  Community: https://community.ruijienetworks.com

l  Technical Support Email: service_rj@ruijienetworks.com

l  Skype: service_rj@ruijienetworks.com

Conventions

1.     Conversions

Convention

Description

Bold font

Commands, command options, and keywords are in bold font.

Italic font

Arguments for which you supply values are in italic font.

[ ]

Elements in square brackets are optional.

{ x | y | z }

Alternative keywords are grouped in braces and separated by vertical bars.

[ x | y | z ]

Optional alternative keywords are grouped in brackets and separated by vertical bars.

&<1-n>

The argument before the sign (&) can be input for consecutive 1- n times.

//

Double slashes at the beginning of a line of code indicate a comment line.

 

1.     Signs

The signs used in this document are described as follows:

 

*    Warning

An alert that calls attention to important rules and information that if not understood or followed can result in data loss or equipment damage.

 

*   Caution

An alert that calls attention to essential information that if not understood or followed can result in function failure or performance degradation.

 

*    Note

An alert that contains additional or supplementary information that if not understood or followed will not lead to serious consequences.

 

*   Specification

An alert that contains a description of product or version support.

 


1 Version Information

Version Number

RGOS 12.5(4)B0707

Applicable Products

RG-CS85 Series

Category

Official release

Customers

Global customers

Release Date

2023-04-03

Baseline Version

N/A

Reason for Release

Official release. The RG-CS85 series switches running this release can be managed by Ruijie Cloud.

 

Use the show version detail command to check the version number.

Ruijie# show version detail

System description      : Ruijie 10G Ethernet Switch(CS85-24SFP/8GT8XS-D) By Ruijie Networks

System start time       : 2023-03-31 17:54:02

System uptime           : 0:02:17:15

System hardware version : 1.00

System software version : CS85_RGOS 12.5(4)B0707

System patch number     : NA

System software number  : M15202003292023

System serial number    : 1234942570062

System boot version     : 1.4.25(Master) 1.4.9(Slave)

System rboot version    : 1.1.35

System core version     : 4.9.190+

Module information:

  Slot 1/0 : CS85-24SFP/8GT8XS-D

    System uptime       : 0:02:17:07

  Cpu 0:

    Hardware version    : 1.00

    Boot version        : 1.4.25(Master) 1.4.9(Slave)

    Rboot version       : 1.1.35

    Software version    : CS85_RGOS 12.5(4)B0707

    Software number     : M15202003292023

    Serial number       : 1234942570062

  Slot 2/0 : CS85-48SFP4XS-D

    System uptime       : 0:02:17:15

  Cpu 0:

    Hardware version    : 1.00

    Boot version        : 1.4.25(Master) 1.4.30(Slave)

    Rboot version       : 1.1.35

    Software version    : CS85_RGOS 12.5(4)B0707

    Software number     : M15202003292023

    Serial number       : 1234942570065


2 Release Record

*    Note

After the version was released, the upgrade file may be released (identified by ID) because bugs were found and resolved.

Release Date

Upgrade File

Description

2023-3-23

CS85_RGOS12.5(4)B0707_10151616_install.bin

Pilot release for the RG-CS85 series switches

2023-4-3

CS85_RGOS12.5(4)B0707_install.bin

Official release for the RG-CS85 series switches


3 Resolved Issues

Number

NA

Description

NA


 

4 Remaining Issues

NA

 


5 Hardware Support

*    Note

The hardware version number is rounded to the first decimal place. The numeral in the second decimal place does not change the supporting release.

Hardware Type

Hardware Model

Version Number

Chassis

RG-CS85-24GT8XS-D

1.0

Chassis

RG-CS85-48GT4XS-D

1.0

Chassis

RG-CS85-24SFP/8GT8XS-D

1.0

Chassis

RG-CS85-48SFP4XS-D

1.0

Chassis

RG-CS85-48GT4XS-HPD

1.0

Expansion Module

CM85-4XS2CQ

1.0

*    Note


6 Version Change

Version

Baseline

Description

RGOS 12.5(4)B0707

NA

Official release for RG-CS85 series switches

1.1   Hardware Support Change

Hardware Type

Hardware Model

Version Number

Chassis

RG-CS85-24GT8XS-D

1.0

Chassis

RG-CS85-48GT4XS-D

1.0

Chassis

RG-CS85-24SFP/8GT8XS-D

1.0

Chassis

RG-CS85-48SFP4XS-D

1.0

Chassis

RG-CS85-48GT4XS-HPD

1.0

Expansion Module

CM85-4XS2CQ

1.0

 

1.2   Feature Support Change

The RG-CS85 series switches running this release can be managed by Ruijie Cloud.


 

7 Upgrade Instructions

1.1   Upgrade Files

To upgrade the device to this version, the following upgrade files are required.

Upgrade File

CS85_RGOS12.5(4)B0707_install.bin

File Description

Installation Package

File Size

150295923 Bytes

Applicable Product

RG-CS85 Series

MD5

2df98d68175f7dd67c6f57b8dbf5774e

Software Version

RGOS 12.5(4)B0707

 

1.2   Prerequisites

NA

1.3   Precautions

NA

1.4   Procedure

1.4.1  Upgrade under the Main Program

(1)   After downloading the main program to the PC, connect the PC NIC to the first copper port of the switch with a network cable.

(2)   Execute TFTPServer.EXE file on the PC and set its directory containing the target production test program files.

(3)   Connect the serial port of the PC to the serial port of the switch and configure the PC’s hyperterminal baud rate to 9600 (or 115200).

(4)   Power on the device and press the combination of CRTL and C to enter the menu interface. If you are entering the command line interface, enter quit to return to the menu. The menu is displayed as follows:

====== BootLoader Menu("Ctrl+Z" to upper level) ======

    TOP menu items.

************************************************

    1. Tftp utilities.

    1. XModem utilities.

    1. Run main.

    1. SetMac utilities.

    1. Scattered utilities.

    1. Set Module Serial

************************************************

Press a key to run the command:

Select 4 in the menu to enter the following submenu:

====== BootLoader Menu("Ctrl+Z" to upper level) ======

    Scattered utilities.

************************************************

    1. Show the bootloader version.

    1. Reload system.

    1. Set baudrate.

    1. Advanced settings.

************************************************

Press a key to run the command:

Select 3 in the menu to enter the following submenu:

====== BootLoader Menu("Ctrl+Z" to upper level) ======

    Advanced settings.

************************************************

    1. Set Fast boot.

    1. Set Support Shell.

    1. Open/Close debug switch.

    1. Format flash filesystem.

    1. Set default environment.

    1. Set RGOS mode.

************************************************

Press a key to run the command:

Select 3 in the menu to format the system:

Press a key to run the command: 3

Warning:It is dangerous to format flash,Are you sure to continue? [yes/No]: y

 

Erasing at 0x2de0000 -- 100% complete.

OK

 

Erasing at 0xfe0000 -- 100% complete.

OK

 

Erasing at 0xf5e0000 -- 100% complete.

OK

 

Erasing at 0xffe0000 -- 100% complete.

OK

Creating dynamic volume data of size 8634368

 

The flash has been formatted successfully!

After the formatting, press the combination of CRTRL and Z to return to the initial menu. Select 0 in the menu to enter the following submenu:

====== BootLoader Menu("Ctrl+Z" to upper level) ======

    Tftp utilities.

************************************************

    1. Upgrade bootloader.

    1. Upgrade kernel and rootfs by install package.

    1. Down to memory and jump to run.

************************************************

Press a key to run the command:

Select 1, and the following messages appears:

Plz enter the Local IP:

Enter any IP address in the same network segment:

Plz enter the Local IP:[192.168.193.50]:

Press Enter, and the following message appears:

Plz enter the Remote IP:

Enter the IP address of the PC you are using:

Plz enter the Remote IP:[192.168.193.28]:

Press Enter, and he following message appears:

Plz enter the Filename:

Enter the target program.

Plz enter the Filename:[ CS85_RGOS12.5(4)B0707_install.bin]:

Press Enter to start the upgrade, and he following message appears:

Erasing Nand...

Erasing at 0x4e0000 -- 100% complete.

Writing to Nand... #done

Auto-update from TFTP: trying update file ' CS85_RGOS12.5(4)B0707_install.bin'

Using eth-0 device

TFTP from server 172.16.1.111; our IP address is 172.16.1.1

Filename ' CS85_RGOS12.5(4)B0707_install.bin'.

Load address: 0x82000000

Loading: #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

done

Bytes transferred = 74601880 (4725598 hex)

Uncompressing 0x47248f2@0x82000ca6 to 0x633fda4@0x86725598

Uncompressed 0x633fda4 bytes

Move the uncompressed data(0x633fda4 bytes) from 0x86725598 to 0x82000000.

Get boot addr 0x87de2f8c,len 0xdc200; kernel addr 0x820e2e88,len 0x440000; rootfs addr 0x82522f04, len 0x58c0000

Package information:

    kernel version:3.10.18.685d6b07d9c3ed

    rootfs version:1.0.0.3e33691f

boot version:1.2.28.0c4a1bf

Determined to upgrade? [Y/N]:

Enter Y manually:

Determined to upgrade? [Y/N]: y

 

Upgrading, keep power on and wait please ...

Upgrading boot ...

Erasing Nand...

Erasing at 0x4e0000 -- 100% complete.

Writing to Nand... #done

 

Erasing at 0x2de0000 -- 100% complete.

OK

 

Erasing at 0xf5e0000 -- 100% complete.

OK

##########################################################################

Creating dynamic volume data of size 8634368 the actual data prevails.

UBI: mtd1 is detached from ubi0

Creating 1 MTD partitions on "nand0":

0x000001000000-0x000002e00000 : "mtd=6"

UBI: attaching mtd1 to ubi0

UBI: physical eraseblock size:   131072 bytes (128 KiB) the actual data prevails.

UBI: logical eraseblock size:    126976 bytes the actual data prevails.

UBI: smallest flash I/O unit:    2048

UBI: VID header offset:          2048 (aligned 2048)

UBI: data offset:                4096

UBI: attached mtd1 to ubi0

UBI: MTD device name:            "mtd=6"

UBI: MTD device size:            30 MiB

UBI: number of good PEBs:        240

UBI: number of bad PEBs:         0

UBI: max. allowed volumes:       128

UBI: wear-leveling threshold:    4096

UBI: number of internal volumes: 1

UBI: number of user volumes:     1

UBI: available PEBs:             19

UBI: total number of reserved PEBs: 221

UBI: number of PEBs reserved for bad PEB handling: 2

UBI: max/mean erase counter: 1/0

UBIFS: mounted UBI device 0, volume 0, name "kernel"

UBIFS: mounted read-only

UBIFS: file system size:   26030080 bytes (25420 KiB, 24 MiB, 205 LEBs) the actual data prevails.

UBIFS: journal size:       3682304 bytes (3596 KiB, 3 MiB, 29 LEBs) the actual data prevails.

UBIFS: media format:       w4/r0 (latest is w4/r0)

UBIFS: default compressor: LZO

UBIFS: reserved for root:  0 bytes (0 KiB)

finding an appropriate kernel...vmlinux-3.10.18.685d6b07d9c3ed

Loading file 'vmlinux-3.10.18.685d6b07d9c3ed' to addr 0x82000000 with size 2016097 (0x001ec361)...

Done

current rootfs:1

current kernal name:vmlinux-3.10.18.685d6b07d9c3ed

 

Erasing at 0xfe0000 -- 100% complete.

OK

##

Erasing Nand...

Erasing at 0x4e0000 -- 100% complete.

Writing to Nand... #done

 

SUCCESS: UPGRADING OK.

The final prompt “SUCCESS: UPGRADING OK.” indicates the upgrade succeeds and requires a reboot of the switch before the new version takes effect.

(5)   Run the “show version detail” command to confirm the upgrade success.

Ruijie#show version detail

System description      : Ruijie 10G Ethernet Switch(CS85-24SFP/8GT8XS-D) By Ruijie Networks

System start time       : 2023-03-31 17:54:02

System uptime           : 0:02:17:15

System hardware version : 1.00

System software version : CS85_RGOS 12.5(4)B0707

System patch number     : NA

System software number  : M15202003292023

System serial number    : 1234942570062

System boot version     : 1.4.25(Master) 1.4.9(Slave)

System rboot version    : 1.1.35

System core version     : 4.9.190+

Module information:

  Slot 1/0 : CS85-24SFP/8GT8XS-D

    System uptime       : 0:02:17:07

  Cpu 0:

    Hardware version    : 1.00

    Boot version        : 1.4.25(Master) 1.4.9(Slave)

    Rboot version       : 1.1.35

    Software version    : CS85_RGOS 12.5(4)B0707

    Software number     : M15202003292023

    Serial number       : 1234942570062

  Slot 2/0 : CS85-48SFP4XS-D

    System uptime       : 0:02:17:15

  Cpu 0:

    Hardware version    : 1.00

    Boot version        : 1.4.25(Master) 1.4.30(Slave)

    Rboot version       : 1.1.35

    Software version    : CS85_RGOS 12.5(4)B0707

    Software number     : M15202003292023

    Serial number       : 1234942570065

1.4.2  Upgrade with a USB Flash Disk

(1)   Run the “upgrade usb0:/xxx.bin” command.

Ruijie# upgrade usb0:/ CS85_RGOS12.5(4)B0707_install.bin

< The terminal is locked by upgrade module >

Upgrade start

!!!Running this command may take some time, please wait.

!!!!!!!!!!!!!!!!!!!!!!!!!!!10%

< you can press Ctrl+C to unlock terminal >

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!20%

< you can press Ctrl+C to unlock terminal >

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!30%

< you can press Ctrl+C to unlock terminal >

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!40%

< you can press Ctrl+C to unlock terminal >

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!50%

< you can press Ctrl+C to unlock terminal >

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!60%

< you can press Ctrl+C to unlock terminal >

100%

Upgrade success  <- When the message “Upgrade finish” is displayed, the copy operation is complete (the BIN file takes effect only after the device is restarted).

< The terminal is unlocked by upgrade module >

[Slot 0]

        Device type     : cs85

        Status          : success

During the upgrade, you can run the “show upgrade status” command to check the upgrade status:

Ruijie#show upgrade status

upgrade global status: UPGRADING

[Slot 0]

        Device type     : cs85

        Status          : upgrading <- When the upgrade is complete, the message “success” is displayed.

(2)   Restart the device to validate the BIN file.

Ruijie#reload

Reload system?(Y/N)y

Ruijie#*May 14 12:51:02: %DP-3-RESET_DEV: Reset device 1 due to SYSMON/4215/CONSOLE/reset system by reload command.

*May 14 12:51:02: %DP-3-MACHINE_RESTART: MACHINE_RESTART.

[504172.116141] %SYS-0-REBOOT: Rebooting by job: dp_mom_thread/4265

[504172.126545] reboot: Restartin

U-Boot 1.4.14-gc4283be (Mar 21 2020 - 21:56:04 +0800)

Clock Configuration:

       CPU0(A53):1200 MHz  CPU1(A53):1200 MHz

       Bus:      500  MHz  DDR:      1600 Mbps

DRAM:  1 GiB (DDR4, 16-bit, CS=2, ECC on)

Flash: SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32 MiB

SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32 MiB

32 MiBMMC:   Only Support 3.3 voltage

sdhci@30400000: 0

Loading Environment from SPI Flash... OK

Boot:   Master

Net:   eth0: ethernet@33410000

Press Ctrl+B to enter Boot Menu, Press Ctrl+C to enter Rboot  0

14 bytes read in 2 ms (6.8 KiB/s)

33 bytes read in 2 ms (15.6 KiB/s)

6814976 bytes read in 150 ms (43.3 MiB/s)

8422045 bytes read in 184 ms (43.7 MiB/s)

36561 bytes read in 3 ms (11.6 MiB/s)

starting pid 1179, tty '': '-/etc/sysinit'

starting initrd

Switching rootfs

[    1.258085] TIPC: Activated (version 2.0.0)

[    1.258546] TIPC: Started in single node mode

log: connected to ubus

 

Press RETURN to get started

(3)   Run the “show version detail” command to confirm the upgrade success.

Ruijie#show version detail

System description      : Ruijie 10G Ethernet Switch(CS85-24SFP/8GT8XS-D) By Ruijie Networks

System start time       : 2023-03-31 17:54:02

System uptime           : 0:02:17:15

System hardware version : 1.00

System software version : CS85_RGOS 12.5(4)B0707

System patch number     : NA

System software number  : M15202003292023

System serial number    : 1234942570062

System boot version     : 1.4.25(Master) 1.4.9(Slave)

System rboot version    : 1.1.35

System core version     : 4.9.190+

Module information:

  Slot 1/0 : CS85-24SFP/8GT8XS-D

    System uptime       : 0:02:17:07

  Cpu 0:

    Hardware version    : 1.00

    Boot version        : 1.4.25(Master) 1.4.9(Slave)

    Rboot version       : 1.1.35

    Software version    : CS85_RGOS 12.5(4)B0707

    Software number     : M15202003292023

    Serial number       : 1234942570062

  Slot 2/0 : CS85-48SFP4XS-D

    System uptime       : 0:02:17:15

  Cpu 0:

    Hardware version    : 1.00

    Boot version        : 1.4.25(Master) 1.4.30(Slave)

    Rboot version       : 1.1.35

    Software version    : CS85_RGOS 12.5(4)B0707

    Software number     : M15202003292023

    Serial number       : 1234942570065

1.4.3  Upgrade under Uboot

(1)   Run the “@@@@b” command

Ruijie#@@@@b

[156375.133279] IRQ RESPONSES

U-Boot 1.4.14-gc4283be (Mar 21 2020 - 21:56:04 +0800)

Clock Configuration:

       CPU0(A53):1200 MHz  CPU1(A53):1200 MHz

       Bus:      500  MHz  DDR:      1600 Mbps

DRAM:  1 GiB (DDR4, 16-bit, CS=2, ECC on)

Flash: SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32 MiB

SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32 MiB

32 MiBMMC:   Only Support 3.3 voltage

sdhci@30400000: 0

Loading Environment from SPI Flash... OK

Boot:   Master

Net:   eth0: ethernet@33410000

Press Ctrl+B to enter Boot Menu, Press Ctrl+C to enter Rboot  0

During the reboot, press Ctrl+C immediately when the following message is displayed to ask you to access the Rboot interface.

Press Ctrl+B to enter Boot Menu, Press Ctrl+C to enter Rboot  0

Rboot                            Version: 1.1.15

------------------------------------------------

    Mount rootfs1 ...

    Mount rootfs2 ...

    Mount data ...

    Mount upgrade ...

    Mount upgrade_bak ...

====== Rboot Menu (Ctrl+Z to upper level) ======

    TOP menu items.

************************************************

    1. Tftp utilities.

    1. X/Y/ZModem utilities.

    1. Run main.

    1. SetMac utilities.

    1. Scattered utilities.

************************************************

Press a key to run the command: 

Click the prompt in red under the Rboot menu to access the address configuration menu:

====== Rboot Menu(Ctrl+Z to upper level) ======

    TOP menu items.

************************************************

    1. Tftp utilities.

    1. XModem utilities.

    1. Run main.

    1. SetMac utilities.

    1. Scattered utilities.

************************************************

Press a key to run the command:

====== Rboot Menu(Ctrl+Z to upper level) ======

   Tftp utilities.

************************************************

   1. Upgrade uboot program.

   1. Upgrade rboot program.

   1. Upgrade main program.

   1. Burn the total FlashROM by this downloaded file.

************************************************

Press a key to run the command: 

enter the Local IP:[]:

Under the address configuration menu, enter the switch IP address, PC IP address, and BIN file name:

Press a key to run the command: 

enter the Local IP:[]:192.12.1.1   <- This address is the switch IP address, configured in the same network segment as the execution PC.

enter the Remote IP:[]:192.12.1.2 <- This address is the PC IP address.

enter the Filename:[]:CS85_RGOS12.5(4)B0707_install.bin <- This file name serves as an example.

The upgrade operation starts after the preceding addresses and file name are entered:

% Total    % Received % Xferd  Average Speed   Time    Time     Time  Current

Dload  Upload   Total   Spent    Left  Speed

147M  100  147M    0     0  1902k      0  0:01:19  0:01:19 --:--:-- 1968k

100  147M  100  147M    0     0  1902k      0  0:01:19  0:01:19 --:--:-- 1902k

Upgrading, keep power on and wait please ...

Select Y as prompted to proceed until the system displays the message “Upgrade Success” (the upgrade file is copied successfully):

Determined to upgrade? [Y/N]: Y

Mount File System ...

Copy file to Flash ...

Upgrade Rootfs Success.

Upgrade Success

After the upgrade file is copied successfully, it automatically returns to the Rboot menu interface. Press Ctrl+Z to exit the menu for reboot. (You can also directly power off and restart the device.):

====== Rboot Menu(Ctrl+Z to upper level) ======

Tftp utilities.

************************************************

1. Upgrade uboot program.

1. Upgrade rboot program.

1. Upgrade main program.

1. Burn the total FlashROM by this downloaded file.

************************************************

Press a key to run the command:

====== Rboot Menu(Ctrl+Z to upper level) ======

TOP menu items.

************************************************

1. Tftp utilities.

1. XModem utilities.

1. Run main.   <- Select Run main, and the switch will automatically restart.

1. SetMac utilities.

1. Scattered utilities.

************************************************

Wait for the device to restart:

*May 14 12:51:02: %DP-3-MACHINE_RESTART: MACHINE_RESTART.

[504172.116141] %SYS-0-REBOOT: Rebooting by job: dp_mom_thread/4265

[504172.126545] reboot: Restartin

U-Boot 1.4.14-gc4283be (Mar 21 2020 - 21:56:04 +0800)

Clock Configuration:

       CPU0(A53):1200 MHz  CPU1(A53):1200 MHz

       Bus:      500  MHz  DDR:      1600 Mbps

DRAM:  1 GiB (DDR4, 16-bit, CS=2, ECC on)

Flash: SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32 MiB

SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32 MiB

32 MiBMMC:   Only Support 3.3 voltage

sdhci@30400000: 0

Loading Environment from SPI Flash... OK

Boot:   Master

Net:   eth0: ethernet@33410000

Press Ctrl+B to enter Boot Menu, Press Ctrl+C to enter Rboot  0

14 bytes read in 2 ms (6.8 KiB/s)

33 bytes read in 2 ms (15.6 KiB/s)

6814976 bytes read in 150 ms (43.3 MiB/s)

8422045 bytes read in 184 ms (43.7 MiB/s)

36561 bytes read in 3 ms (11.6 MiB/s)

starting pid 1179, tty '': '-/etc/sysinit'

starting initrd

Switching rootfs

[    1.258085] TIPC: Activated (version 2.0.0)

[    1.258546] TIPC: Started in single node mode

log: connected to ubus

 

Press RETURN to get started

(2)   Run the “show version detail” command to check whether the upgrade is successful.

Ruijie#show version detail

System description      : Ruijie 10G Ethernet Switch(CS85-24SFP/8GT8XS-D) By Ruijie Networks

System start time       : 2023-03-31 17:54:02

System uptime           : 0:02:17:15

System hardware version : 1.00

System software version : CS85_RGOS 12.5(4)B0707

System patch number     : NA

System software number  : M15202003292023

System serial number    : 1234942570062

System boot version     : 1.4.25(Master) 1.4.9(Slave)

System rboot version    : 1.1.35

System core version     : 4.9.190+

Module information:

  Slot 1/0 : CS85-24SFP/8GT8XS-D

    System uptime       : 0:02:17:07

  Cpu 0:

    Hardware version  &nb