Ruijie RG-S2900G-E V3 Series Switch RGOS11.4(1)B70P1 Firmware
B70P1.files/image006.jpg)
B70P1.files/image007.gif){kind=small}
Contents
This document includes the followingsections:
n Changed Features
Basic Information
Table 1 lists the basic information of thecurrent release.
Table 1 Basic Information of the CurrentRelease
| S29_RGOS 11.4(1)B70P1 | |
| Previous Release | S29_RGOS 11.4(1)B42P1 |
| Applicable Product | S29 Series Switch |
| Category | Official release |
Run the show version command to display the information.
Ruijie#showversion
Systemdescription : Ruijie 10G Ethernet Switch with PoE(S2910C-24GT2XS-HP-E) By Ruijie Networks
Systemstart time : 2019-09-30 21:56:36
Systemuptime : 0:22:53:12
Systemhardware version : 1.00
Systemsoftware version : S29_RGOS 11.4(1)B70P1
Systempatch number : NA
Systemserial number : W268HWC0Z0003
Systemboot version : 1.2.28
Moduleinformation:
Slot 0 : S2910C-24GT2XS-HP-E
Cpu0:
Hardware version : 1.00
Boot version : 1.2
Software version : S29_RGOS 11.4(1)B70P1
Serial number : W268HWC0Z0003
Ruijie#
Ruijie#showversion detail
Systemdescription : Ruijie 10G Ethernet Switch with PoE(S2910C-24GT2XS-HP-E) By Ruijie Networks
Systemstart time : 2019-09-30 21:56:36
Systemuptime : 0:21:21:21
Systemhardware version : 1.00
Systemsoftware version : S29_RGOS 11.4(1)B70P1
Systempatch number : NA
System softwarenumber : M22530808212019
Systemserial number : W268HWC0Z0003
Systemboot version : 1.2.28.0c4a1bf(170209)
Systemcore version : 3.10.18.7b6045cb2c1b2a
Moduleinformation:
Slot 0 : S2910C-24GT2XS-HP-E
Cpu0:
Hardware version : 1.00
Boot version : 1.2.28
Software version : S29_RGOS 11.4(1)B70P1
Software number : M22530808212019
Serial number : W268HWC0Z0003
Hardware Supported
Table 2 shows the hardware supported bythe RGOS 11.4(1)B70P1.
Table 2 Supporting Hardware Models
| Hardware Model | Version | Description |
| S2910-24GT4XS-E | 1.00 | Switch |
| S2910-48GT4XS-E | 1.00 | Switch |
| S2910C-24GT2XS-P-E | 1.00 | Switch |
| S2910C-24GT2XS-HP-E | 1.00 | Switch |
| S2910C-48GT2XS-HP-E | 1.00 | Switch |
| S2910-24GT4SFP-UP-H | 3.00 | Switch |
| S2910-24GT4SFP-UP-H | 2.00 | Switch |
| S2910-24GT4XS-UP-H | 1.00 | Switch |
| S2910-24GT4XS-UP-H | 3.00 | Switch |
| S2910-10GT2SFP-P-E | 1.00 | Switch |
| S2910-10GT2SFP-UP-H | 1.00 | Switch |
| S2910-10GT2SFP-UP-H | 3.00 | Switch |
| S2910-24GT4XS-PS-E | 1.00 | Switch |
| S2952G-E V3 | 1.00 | Switch |
| S2928G-E V3 | 1.00 | Switch |
| M2910-01XS | 1.00 | Expansion module |
| M2910-01XT | 1.00 | Expansion module |
| M2910-02XS | 1.00 | Expansion module |
B70P1.files/image002.jpg){kind=small}
The hardware version number is rounded to thefirst decimal place. The numeral in the second decimal place does not changethe supporting release.
For detail, see RG-S2910XS-E / RG-S2910-H / RG-S2910-10GT2SFP-P-E/ RG-S2900G-E V3 Series Switch Hardware Installation and ReferenceGuide.
Resolved Issues
This section describes the fixed bugs.
Table 3 Fixed Bugs Based on 11.4(1)B42P1
| No. | Description |
| 1 | Commands containing shell could be run on any port. |
| 2 | In the default mode (energy-saving mode), the 802.3BT standard was not supported on PoE ports. |
| 3 | When an S29 series switch was deployed between the DHCP relay agent and the server, some client terminals (a switch model of H3C) failed to obtain dynamic addresses. |
Changed Features
Hardware
N/A
Firmware
| Module | MACC |
| Function Change | The Web UI and CLI are optimized. |
| CLI Change | Simplified command: acs url { url | macc } |
| Web Change | A page for CWMP configurations is provided. |
| MIB Change | N/A |
| Module | Web Management |
| Function Change | By default, Web management is not accessible. |
| CLI Change | N/A |
| Web Change | Web UI is not available when the switch is connected for the first time. |
| MIB Change | N/A |
| Module | Web Management |
| Function Change | General administrators cannot visit pages that they are not authorized to. |
| CLI Change | N/A |
| Web Change | General administrators are not allowed to operate Web management. |
| MIB Change | N/A |
| Module | Web Management |
| Function Change | HTTP is redirected to HTTPS automatically. |
| CLI Change | New commands: web-server http redirect-to-https web-server https certificate web-server https generate self-signed-certificate |
| Web Change | If both HTTP and HTTPS services are enabled, HTTP is redirected to HTTPS. HTTP pages can be visited when only HTTP service is enabled. |
| MIB Change | N/A |
| Module | SSH |
| Function Change | The monitoring port ID for the SSH server can be changed. |
| CLI Change | New command: ip ssh port |
| Web Change | N/A |
| MIB Change | N/A |
| Module | SSH |
| Function Change | An encrypted session with a remote device can be established. |
| CLI Change | New commands: ssh [ oob ] [ -v { 1 | 2 } ] [ -c { 3des | aes128-cbc | aes192-cbc | aes256-cbc } ] [ -l username ] [ -m { hmac-md5-96 | hmac-md5-128 | hmac-sha1-96 | hmac-sha1-160 } ] [ -p port-num ] { ip-addr | hostname } [ /source { ip A.B.C.D | ipv6 X:X:X:X::X | interface interface-name } ] [ /vrf vrf-name ] |
| Web Change | N/A |
| MIB Change | N/A |
| Module | Interface |
| Function Change | The functionality of port oscillation protection is added. |
| CLI Change | port-dither protect |
| Web Change | N/A |
| MIB Change | N/A |
| Module | Interface |
| Function Change | N/A |
| CLI Change | New command: You can run the show interfaces ethernet brief to view Ethernet information of interfaces. Modified command: The output of the show interfaces status command now indicates the total rate of all member ports rather than the rate of the aggregation port. |
| Web Change | N/A |
| MIB Change | N/A |
Related Documentation
n RG-S29 Series Switch RGOS Command Reference,Release 11.4(1)B70P1
This manual describes the configuration commands related to the various networkprotocols supported on the RG-S29 series switch RGOS11.4(1)B70P1 in detail,including the command mode, parameter description, usage guide, andconfiguration examples.
n RG-S29 Series Switch RGOS Web-Based ConfigurationGuide, Release 11.4(1)B70P1
Thismanual describes how to configure the wireless controller through Web.
n RG-S2910XS-E Series Switch Hardware Installationand Reference Guide
This manual introduces the functional and physical features of the S2910XS-Eseries switch and provides the device installation steps, hardwaretroubleshooting, module technical specifications, and specifications and usageguidelines for cables and connectors.
n RG-S2910-H Series Switch Hardware Installationand Reference Guide
This manual introduces the functional and physical features of the SS2910-Hseries switch and provides the device installation steps, hardwaretroubleshooting, module technical specifications, and specifications and usageguidelines for cables and connectors.
n RG-S2910-10GT2SFP-P-E Switch HardwareInstallation and Reference Guide
This manual introduces the functional and physical features of the S2910-10GT2SFP-P-Eswitch and provides the device installation steps, hardware troubleshooting,module technical specifications, and specifications and usage guidelines forcables and connectors.
n RG- S2900G-E V3 Series Switch HardwareInstallation and Reference Guide
This manual introduces the functional and physical features of the S2900G-E V3series switch and provides the device installation steps, hardwaretroubleshooting, module technical specifications, and specifications and usageguidelines for cables and connectors.
You can obtain the related documents at: http://www.ruijienetworks.com/.
Upgrade/Downgrade Files
| Applicable Product | Upgrade Firmware | File Size | MD5 |
| S2910-24GT4XS-E S2910-48GT4XS-E S2910C-24GT2XS-P-E S2910C-24GT2XS-HP-E S2910C-48GT2XS-HP-E S2910-24GT4SFP-UP-H S2910-24GT4XS-UP-H S2910-10GT2SFP-P-E S2910-10GT2SFP-UP-H S2910-24GT4XS-PS-E S2952G-E V3 S2928G-E V3 | S29_RGOS11.4(1)B70P1_install.bin | 75,402,076 bytes | 820d6326f9228ad8067b794e063db015 |
Upgrade/Downgrade Tips
The following are some tips for upgradingthe RG-S29:
n During the upgrade and downgrade, pay attentionto the prompt messages. If failures occur, please save the log and contact usfor technical assistance.
n During the upgrade and downgrade, it isrecommended you not power off or reset the system, or plug/unplug any module.
n Use the show version command to check thefirmware after the upgrade/downgrade.
Thank you. We will inform you of our response as soon as possible. 
