RG-S2910XS-E_RGOS11.4(1)B42P1_05172823_install Firmware
B42P1.files/image006.jpg)
B42P1.files/image007.gif){kind=small}
Contents
This document includes the followingsections:
Basic Information
Table 1 lists the basic information of thecurrent release.
Table 1 Basic Information of the CurrentRelease
| S29_RGOS 11.4(1)B42P1 | |
| Previous Release | RGOS 11.4(1)B42 |
| Applicable Product | S29 Series Switch |
| Category | Official release |
Run the show version command to display the information.
2 Ruijie#showversion
Systemdescription : Ruijie 10G Ethernet Switch with PoE(S2910C-24GT2XS-HP-E) By Ruijie Networks
Systemstart time : 2018-05-29 16:35:34
Systemuptime : 0:22:53:12
System hardwareversion : 1.00
Systemsoftware version : S29_RGOS 11.4(1)B42P1, Release(05172823)
Systempatch number : NA
Systemserial number : W268HWC0Z0003
Systemboot version : 1.2.28
Moduleinformation:
Slot 0 : S2910C-24GT2XS-HP-E
Cpu0:
Hardware version : 1.00
Boot version : 1.2
Software version : S29_RGOS 11.4(1)B42P1, Release(05172823)
Serial number : W268HWC0Z0003
Ruijie#
Ruijie#showversion detail
Systemdescription : Ruijie 10G Ethernet Switch with PoE(S2910C-24GT2XS-HP-E) By Ruijie Networks
Systemstart time : 2018-05-29 16:35:33
Systemuptime : 0:21:21:21
Systemhardware version : 1.00
Systemsoftware version : S29_RGOS 11.4(1)B42P1, Release(05172823)
Systempatch number : NA
Systemsoftware number : M23430205282018
Systemserial number : W268HWC0Z0003
Systemboot version : 1.2.28.0c4a1bf(170209)
Systemcore version : 3.10.18.685d6b00b86bd9
Moduleinformation:
Slot 0 : S2910C-24GT2XS-HP-E
Cpu0:
Hardware version : 1.00
Boot version : 1.2.28
Software version : S29_RGOS 11.4(1)B42P1, Release(05172823)
Software number : M23430205282018
Serial number : W268HWC0Z0003
Hardware Supported
Table 2 shows the hardware supported bythe RGOS 11.4(1)B42P1.
Table 2 Supporting Hardware Models
| Hardware Model | Version | Description |
| S2910-24GT4XS-E | 1.00 | Switch |
| S2910-48GT4XS-E | 1.00 | Switch |
| S2910C-24GT2XS-P-E | 1.00 | Switch |
| S2910C-24GT2XS-HP-E | 1.00 | Switch |
| S2910C-48GT2XS-HP-E | 1.00 | Switch |
| S2910-24GT4SFP-UP-H | 3.00 | Switch |
| S2910-24GT4SFP-UP-H | 2.00 | Switch |
| S2910-24GT4XS-UP-H | 1.00 | Switch |
| S2910-24GT4XS-UP-H | 3.00 | Switch |
| S2910-10GT2SFP-P-E | 1.00 | Switch |
| S2910-10GT2SFP-UP-H | 1.00 | Switch |
| S2910-10GT2SFP-UP-H | 3.00 | Switch |
| S2952G-E V3 | 1.00 | Switch |
| S2928G-E V3 | 1.00 | Switch |
| M2910-01XS | 1.00 | Expansion module |
| M2910-01XT | 1.00 | Expansion module |
| M2910-02XS | 1.00 | Expansion module |
B42P1.files/image002.jpg){kind=small}
The hardware version number is rounded to thefirst decimal place. The numeral in the second decimal place does not changethe supporting release.
For detail, see RG-S2910XS-E / RG-S2910-H / RG-S2910-10GT2SFP-P-E/ RG-S2900G-E V3 Series Switch Hardware Installation and ReferenceGuide.
Resolved Issues
N/A
Changed Features
Hardware
N/A
Firmware
| Module | Changed Feature | CLI |
| MACC | Management on MACC is supported. | N/A |
| Web Management | Web UI is available once the switch is connected. | N/A |
Related Documentation
n RG-S29 Series Switch RGOS Command Reference,Release 11.4(1)B42P1
This manual describes the configuration commands related to the various networkprotocols supported on the RG-S29 series switch RGOS11.4(1)B42P1 in detail,including the command mode, parameter description, usage guide, andconfiguration examples.
n RG-S29 Series Switch RGOS Web-Based ConfigurationGuide, Release 11.4(1)B42P1
Thismanual describes how to configure the wireless controller through Web.
n RG-S2910XS-E Series Switch Hardware Installationand Reference Guide
This manual introduces the functional and physical features of the S2910XS-Eseries switch and provides the device installation steps, hardware troubleshooting,module technical specifications, and specifications and usage guidelines forcables and connectors.
n RG-S2910-H Series Switch Hardware Installationand Reference Guide
This manual introduces the functional and physical features of the SS2910-Hseries switch and provides the device installation steps, hardwaretroubleshooting, module technical specifications, and specifications and usageguidelines for cables and connectors.
n RG-S2910-10GT2SFP-P-E Switch HardwareInstallation and Reference Guide
This manual introduces the functional and physical features of the S2910-10GT2SFP-P-Eswitch and provides the device installation steps, hardware troubleshooting,module technical specifications, and specifications and usage guidelines forcables and connectors.
n RG- S2900G-E V3 Series Switch HardwareInstallation and Reference Guide
This manual introduces the functional and physical features of the S2900G-E V3series switch and provides the device installation steps, hardwaretroubleshooting, module technical specifications, and specifications and usageguidelines for cables and connectors.
You can obtain the related documents at: http://www.ruijienetworks.com/.
Upgrade/Downgrade Files
| Applicable Product | Upgrade Firmware | File Size | MD5 |
| S2910-24GT4XS-E S2910-48GT4XS-E S2910C-24GT2XS-P-E S2910C-24GT2XS-HP-E S2910C-48GT2XS-HP-E S2910-24GT4SFP-UP-H S2910-24GT4XS-UP-H S2910-10GT2SFP-P-E S2910-10GT2SFP-UP-H S2952G-E V3 S2928G-E V3 | S29_RGOS11.4(1)B42P1_05172823_install.bin | 74,687,103 bytes | 932E2C76E6D966883FA683D9A8677E46 |
Upgrade/Downgrade Tips
The following are some tips for upgradingthe RG-S29:
n During the upgrade and downgrade, pay attentionto the prompt messages. If failures occur, please save the log and contact usfor technical assistance.
n During the upgrade and downgrade, it isrecommended you not power off or reset the system, or plug/unplug any module.
n Use the show version command to check thefirmware after the upgrade/downgrade.
Thank you. We will inform you of our response as soon as possible. 
