Wi-Fi 6E

Internal

The Wi-Fi 6E protocol is supported for the first time, and new features are added including the 6 GHz frequency band, Multi-BSSID, and Reduced Neighbor Report (RNR).

New commands:

multi-bssid enable

rnr enable

ap-announcement-mode [ fils | uprs ]

Country/Region code compliance

Market

Regulatory compliance of 73 country or region codes is added.

RF-Ping

Internal

Air interface link detection

New commands:

rf-ping enable

rf-ping H.H.H [ data-rate data-rate ]

rf-ping update

WPA3

Internal

WPA3: Protected Management Frame (PMF) enabled in mandatory mode in the 6 GHz frequency band

Added encryption modes of WPA3-Personl: Hash-to-Element (H2E) only and both Hash-to-Element and Hunting and Pecking support (H2E/HnP)

New command:

security wpa3 personal pwe { hnp | h2e | both }

BUG-1078065

When the AC is connected to a non-Wi-Fi 6E AP, WIS network optimization fails.

AC_RGOS 11.9(6)W3B4, Release(10201007)

BUG-1110953

When the AP reports a large amount of Wireless Intrusion Detection System (WIDS) scanning information to the AC, a core dump occurs in the syslog process.

AC_RGOS 11.9(6)W3B4, Release(10201007)

BUG-1110943

MAC Authentication Bypass (MAB) exceptions occur on wireless clients.

AC_RGOS 11.9(6)W3B4, Release(10201007)

BUG-1093989

Radio Resource Management (RRM) optimization does not take effect.

AC_RGOS 11.9(6)W3B4, Release(10201007)

BUG-1110339

When the Dual Radio Into One feature is disabled in the Config Wizard and separate configurations are required for both 2.4 GHz and 5 GHz radios on the AC's Eweb, the 2.4 GHz radio does not automatically associate with the default AP group. As a result, there is no 2.4 GHz signal.

AC_RGOS 11.9(6)W3B4, Release(10201007)

BUG-1085465

After an active/standby switchover is performed in a VAC scenario, the AP is prone to frequent disconnections.

AC_RGOS 11.9(6)W3B4, Release(10201007)