Compare Products
Hide
VS
Models
Series
Highlight Features
Product Overview
The RG-SAP185-SP-W is a Wi-Fi 6 wireless access point that delivers dual radios, high performance, and enterprise-grade encryption. Due to the hybrid cloud management mode and high-density access design, it is suitable for flexible deployment in high-quality network scenarios, such as classroom, dormitory, and office scenarios in the education industry, office scenarios of small- and medium-sized enterprises, outpatient clinics and office scenarios in the medical industry, and hotel apartments.
Product Highlights
Cost-effectiveness and High Speed
Dual-band design (2.4 GHz + 5 GHz), four spatial streams, 1024-Quadrature Amplitude Modulation (QAM) high-speed access, and up to 2.976 Gbps peak data rate, realizing high-speed wireless access experience.
Orthogonal Frequency Division Multiple Access (OFDMA), Multi-User Multiple-Input Multiple-Output (MU-MIMO), and QoS transmission optimization technologies, improving the average user speed in high-density deployment and access scenarios
RF power adjustment and intelligent channel allocation to solve the problems such as co-channel interference and adjacent channel interference, thereby improving network transmission efficiency and stability
Intelligent Networking
Local and cloud management modes, and intelligent wireless network optimization, reducing TCO and maximizing ROI
Radio Resource Management (RRM) technology, avoiding signal interference between APs and between APs and interference devices, and improving user experience
Intelligent local forwarding technology used to forward data that is sensitive to delay and requires real-time high-performance transmission through a wired network, greatly reducing the traffic pressure on ACs
High Security
Encrypted authentication to enhance data security, including web authentication, 802.1X authentication, MAC address authentication, and local authentication; free cloud-based authentication; multiple efficient and convenient authentication modes such as MAB authentication, and SMS- and QR code-based authentication when the AP is used with Ruijie's authentication system or multi-service AC
Network Foundation Protection Policy (NFPP) used to rate-limit or isolate attack flows to restore the network
Dynamic Frequency Selection (DFS), optimizing the use of available RF spectrum to prevent radar channel interference
Cyclic Delay/Shift Diversity (CDD/CSD), Maximum Ratio Combining (MRC), Space-Time Block Coding (STBC), and Low-Density Parity Check (LDPC), improving the signal quality, signal receiving, and reliability and performance of data transmission
Multicast-to-unicast technology to improve network security and reliability
Hardware Specifications |
RG-SAP185-SP-W |
802.11n |
Four spatial streams Radio 1 – 2.4 GHz: 2x2 MIMO, two spatial streams Radio 2 – 5 GHz: 2x2 MIMO, two spatial streams Channels: Radio 1 – 2.4 GHz: 20 MHz and 40 MHz Radio 2 – 5 GHz: 20 MHz and 40 MHz Combined peak data rate: 600 Mbps Radio 1 – 2.4 GHz: 6.5 Mbps to 300 Mbps (MCS0 to MCS15 ) Radio 2 – 5 GHz: 6.5 Mbps to 300 Mbps (MCS0 to MCS15) Radio technologies: Orthogonal Frequency-Division Multiplexing (OFDM) Modulation types: BPSK, QPSK, 16-QAM, 64-QAM Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) Aggregate MAC Service Data Unit (A-MSDU) Dynamic Frequency Selection (DFS) Cyclic Delay/Shift Diversity (CDD/CSD) Maximum Ratio Combining (MRC) Space-Time Block Coding (STBC) Low-Density Parity Check (LDPC) Transmit beam-forming (TxBF) |
802.11ac |
Two spatial streams Radio 2 – 5 GHz: 2x2 MIMO, two spatial streams Channels: Radio 2 – 5 GHz: 20 MHz, 40 MHz, and 80 MHz Combined peak data rate: 1.733 Gbps Radio 2 – 5 GHz: 6.5 Mbps to 1.733 Gbps (MCS0 to MCS9) Radio technologies: Orthogonal Frequency-Division Multiplexing (OFDM) Modulation types: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) Aggregate MAC Service Data Unit (A-MSDU) Dynamic Frequency Selection (DFS) Cyclic Delay/Shift Diversity (CDD/CSD) Maximum Ratio Combining (MRC) Space-Time Block Coding (STBC) Low-Density Parity Check (LDPC) Transmit beam-forming (TxBF) |
802.11ax |
Four spatial streams Radio 1 – 2.4 GHz: 2x2 uplink/downlink MU-MIMO, two spatial streams Radio 2 – 5 GHz: 2x2 uplink/downlink MU-MIMO, two spatial streams Channels: Radio 1 – 2.4 GHz: 20 MHz and 40 MHz Radio 2 – 5 GHz: 20 MHz, 40 MHz, 80 MHz and 160 MHz Combined peak data rate: 2.976 Gbps: Radio 1 – 2.4 GHz: 8.6 Mbps to 574 Mbps (MCS0 to MCS11) Radio 2 – 5 GHz: 8.6 Mbps to 2.402 Gbps (MCS0 to MCS11) Radio technologies: uplink/downlink Orthogonal Frequency-Division Multiple Access (OFDMA) Modulation types: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) Aggregate MAC Service Data Unit (A-MSDU) Dynamic Frequency Selection (DFS) Cyclic Delay/Shift Diversity (CDD/CSD) Maximum Ratio Combining (MRC) Space-Time Block Coding (STBC) Low-Density Parity Check (LDPC) Transmit beam-forming (TxBF) WPA3 |
Antenna |
Wi-Fi 2.4 GHz: two built-in smart antennas with the peak gain of 3 dBi 5 GHz: two built-in smart antennas with the peak gain of 3 dBi |
Port |
Uplink: 1 x 10/100/1000Base-T auto-negotiation RJ45 Ethernet port, 802.3af/at-compliant PoE One pass-through port Downlink: 1 x 10/100/1000Base-T auto-negotiation RJ45 Ethernet ports One pass-through port |
Status LED |
1 x multi-color system status LED AP power-on status Software initialization status and upgrade status CAPWAP tunnel timeout |
Button |
1 x Reset button Press the button for shorter than 2 seconds. Then the device restarts. Press the button for longer than 5 seconds. Then the device restores to factory settings. |
Dimensions (W x D x H) |
Main unit: 86 mm × 86 mm × 38 mm (3.39 in. ×3.39 in .× 1.50 in.) Shipping: 125 mm × 115 mm × 60 mm (4.93 in. × 4.53 in. × 2.37 in.) |
Weight |
Main unit: 0.21 kg (0.47 lbs) Shipping: 0.24 kg (0.53 lbs) |
Mounting |
Mounting in 86 mm x 86 mm junction box |
Input power supply |
PoE input over the WAN port: compliance with 802.3af/at (PoE) |
Power consumption |
8 W |
Environment |
Storage temperature: –40°C to +70°C (–40°F to +158°F) Storage humidity: 5% RH to 95% RH (non-condensing) Storage altitude: < 5,000 m (16,404.20 ft.) at 25°C (77°F) Operating temperature: 0°C to 40°C (32°F to 104°F) Operating humidity: 5% RH to 95% RH (non-condensing) Operating altitude: < 3,000 m (9,842.52 ft.) at 40°C (104°F) At an altitude between 3,000 m (9,842.52 ft.) and 5,000 m (16,404.20 ft.), every time the altitude increases by 166 m (546 ft.), the maximum temperature decreases by 1°C (1.8°F). |
Mean Time Between Failure (MTBF) |
200,000 hours (22 years) at the operating temperature of 25°C (77°F) |
System memory |
256 MB DRAM, 128 MB flash |
Transmit power |
2.4 GHz: Max. transmit power: 20 dBm (100 mW) 5 GHz:Max. transmit power: 20 dBm (100 mW) Note: The transmit power adjusted in percentage. The transmit power is limited by local regulatory requirements. |
The following table lists the radio frequency performance of Wi-Fi including different frequency bands, protocols, and date rates. It is country-specific, and Ruijie Networks reserves the right of interpretation.
Radio Frequency Performance |
RG-SAP185-SP-W |
||
Frequency Band and Protocol |
Data Rate |
Max. Transmit Power per Transmit Chain |
Max. Receive Sensitivity per Receive Chain |
2.4GHz 802.11b |
1 Mbps |
18 dBm |
–91 dBm |
2 Mbps |
17 dBm |
–91 dBm |
|
5.5 Mbps |
16 dBm |
–90 dBm |
|
11 Mbps |
15 dBm |
–87 dBm |
|
2.4GHz 802.11g |
6 Mbps |
18 dBm |
–89 dBm |
24 Mbps |
16 dBm |
–82 dBm |
|
36 Mbps |
16 dBm |
–78 dBm |
|
54 Mbps |
15 dBm |
–72 dBm |
|
2.4GHz 802.11n (HT20) |
MCS0 |
18 dBm |
–85 dBm |
MCS7 |
15 dBm |
–67 dBm |
|
2.4GHz 802.11n (HT40) |
MCS0 |
18 dBm |
–82 dBm |
MCS7 |
15 dBm |
–64 dBm |
|
2.4GHz 802.11ax (HE20) |
MCS0 |
18 dBm |
–85 dBm |
MCS11 |
12 dBm |
–58 dBm |
|
2.4GHz 802.11ax (HE40) |
MCS0 |
18 dBm |
–82 dBm |
MCS11 |
12 dBm |
–54 dBm |
|
5GHz 802.11a |
6 Mbps |
18 dBm |
–89 dBm |
24 Mbps |
16 dBm |
–82 dBm |
|
36 Mbps |
16 dBm |
–78 dBm |
|
54 Mbps |
15 dBm |
–72 dBm |
|
5GHz 802.11n (HT20) |
MCS0 |
18 dBm |
–85 dBm |
MCS7 |
15 dBm |
–67 dBm |
|
5GHz 802.11n (HT40) |
MCS0 |
18 dBm |
–82 dBm |
MCS7 |
15 dBm |
–64 dBm |
|
5GHz 802.11ac (VHT20) |
MCS0 |
18 dBm |
–85 dBm |
MCS9 |
15 dBm |
–60 dBm |
|
5GHz 802.11ac (VHT40) |
MCS0 |
18 dBm |
–82 dBm |
MCS9 |
15 dBm |
–57 dBm |
|
5GHz 802.11ac (VHT80) |
MCS0 |
18 dBm |
–79 dBm |
MCS9 |
13 dBm |
–53 dBm |
|
5GHz 802.11ax (HE20) |
MCS0 |
18 dBm |
–85 dBm |
MCS11 |
12 dBm |
–58 dBm |
|
5GHz 802.11ax (HE40) |
MCS0 |
18 dBm |
–82 dBm |
MCS11 |
12 dBm |
–54 dBm |
|
5GHz 802.11ax (HE80) |
MCS0 |
18 dBm |
–79 dBm |
MCS11 |
12 dBm |
–52 dBm |
Basic Function |
RG-SAP185-SP-W |
Applicable software version |
RGOS 11.9(6)W3B7 or later |
WLAN |
|
Max. number of associated STAs |
512 (up to 256 STAs per radio) |
Max. number of BSSIDs |
16 (up to 8 BSSIDs per radio) |
Max. number of WLAN IDs |
8 |
STA management |
SSID hiding Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN attributes independently. Remote Intelligent Perception Technology (RIPT) Intelligent STA identification technology Intelligent load balancing based on the STA quantity or traffic Rate set settings |
STA limiting |
SSID-based STA limiting Radio-based STA limiting |
Bandwidth limiting |
STA/SSID/AP-based rate limiting |
CAPWAP |
IPv4/IPv6 CAPWAP Layer 2 and Layer 3 topology between an AP and an AC An AP can automatically discover the accessible AC. An AP can be automatically upgraded through the AC. An AP can automatically download the configuration file from the AC. CAPWAP through NAT |
Data forwarding |
Centralized and local forwarding |
Wireless roaming |
Layer 2 and Layer 3 roaming |
Wireless locating |
MU and TAG device locating |
Security and Authentication |
|
Authentication and encryption |
Remote Authentication Dial-In User Service (RADIUS) PSK and web authentication QR code-based guest authentication, SMS authentication, and MAC address bypass (MAB) authentication Data encryption: WEP (64/128 bits), WPA (TKIP), WPA-PSK, WPA2 (AES), WPA3-Enterprise, WPA3-Individual |
Data frame filtering |
Allowlist, static blocklist, and dynamic blocklist |
WIDS |
Wireless Intrusion Detection System(WIDS) User isolation Rogue AP detection and containment |
ACL |
IP standard ACL, MAC extended ACL, IP extended ACL, and expert-level ACL Time range-based ACL ACL based on a Layer 2 interface ACL based on a Layer 3 interface Ingress ACL based on a wireless interface Dynamic ACL assignment based on 802.1X authentication (used with the AC) |
CPP |
CPU Protect Policy (CPP) |
NFPP |
Network Foundation Protection Policy (NFPP) |
Routing and Switching |
|
MAC |
Static and filtered MAC addresses MAC address table size: 1,024 Max. number of static MAC addresses: 1,024 Max. number of filtered MAC addresses: 1,024 |
Ethernet |
Jumbo frame length: 1,518 Full-duplex and half-duplex modes of interfaces IEEE802.1p and IEEE802.1Q |
VLAN |
Interface-based VLAN assignment Max. number of SVIs: 100 Max. number of VLANs: 4,094 VLAN ID range: 1–4,094 |
ARP |
ARP entry aging and proxy ARP Max. number of ARP entries: 1,024 IP address conflict detection between downlink users |
IPv4 services |
Static and DHCP-assigned IPv4 addresses NAT, FTP ALG and DNS ALG |
IPv6 services |
IPv6 addressing, Neighbor Discovery (ND), ICMPv6, IPv6 ping IPv6 DHCP client |
IP routing |
IPv4/IPv6 static route Max. number of static IPv4 routes: 1,024 Max. number of static IPv6 routes: 1,000 |
Multicast |
Multicast-to-unicast conversion |
VPN |
PPPoE client IPsec VPN |
Network Management and Monitoring |
|
Network management |
NTP server and NTP client SNMPv1/v2c/v3 Fault detection and alarm Information statistics and logging |
Network management platform |
Web management (Eweb) |
User access management |
Telnet and TFTP management |
Switchover among Fat, Fit, and cloud modes |
When the AP works in Fit mode, it can be switched to Fat mode through an AC. When the AP works in Fat mode, it can be switched to Fit mode through the console port or Telnet mode. When the AP works in cloud mode, it can be managed through Ruijie Cloud. |
The following value-added software functions can be achieved with the WIS solution (used with RG-iData-WIS and wireless controller).
Value-added Software |
RG-SAP185-SP-W |
Intelligent O&M |
|
Experience |
Network operation analysis, such as device stability and signal coverage Measuring users' network experience based on indicators such as the latency, packet loss, signal strength, and channel utilization, and visualizing results of the network experience Statistics on the number of online and offline failures of STAs associated with different APs, average signal strength, and other parameters VIP monitoring and alarm, and custom alarm thresholds STA global experience map and experience coverage evaluation based on the time range STA access protocol replay and fine-grained STA fault diagnosis Note: To support the preceding functions, ensure that the AP works in Fit mode. |
Network optimization |
Network performance optimization, including one-click network optimization and scenario-based optimization Client steering to cope with roaming stickiness, and experience indicator comparison Client steering to cope with remote association, and experience indicator comparison One-click diagnosis – analyzing problems and providing suggestions |
Big data |
Baseline analysis – recording the configuration, version, and other changes, and tracking network KPI changes Time capsule – analyzing the device version and configuration change history |
Regional analysis |
Batch generation of building floor information – uploading floor plans, and dragging and dropping AP positions |
One-click report |
One-click health report – generating a report on the overall operation of a network |
Security radar |
Unauthorized Wi-Fi signal location, presentation by category, and containment |
Cloud Management |
|
Management and maintenance |
Uniformly connecting, managing, and maintaining APs, ACs, and other devices, batch device configuration and upgrade, and other functions Deployment through Zero Touch Provisioning (ZTP) – creating configuration templates and automatically applying configured templates One-click discovery of the wired and wireless network topology and topology generation |
Cloud Authentication |
|
Authentication mode |
SMS authentication, fixed account authentication, one-click authentication, Facebook authentication, Instagram authentication, voucher authentication, and other authentication modes Authentication implemented in the cloud, without the need to deploy the local authentication server |
Customized portal |
Customized Portal authentication page for mobile phones and PCs |
SMS gateway |
Interconnection with SMS gateways of GUODULINK and Alibaba Cloud |
Platform Capabilities |
|
Hierarchy and decentralization |
Authorizing different applications for different users to meet service needs of different departments Granting operation permissions to administrators in different scenarios |
System management |
Account operation, authorization configuration, email configuration, configuration backup, exception alarms, and other system management functions |
Note: For details, refer to the latest hybrid cloud management solution.
Regulatory Compliance |
RG-SAP185-SP-W |
Regulatory compliance |
EN 55032, EN 55035, EN 61000-3-3, EN IEC 61000-3-2, IEC 62368-1, EN 62368-1, EN 301 489-1, EN 301 489-3, EN 301 489-17, EN 300 328, EN 301 893, EN 300 440, FCC Part 15, and EN IEC 62311 |
* For more country-specific regulatory information and approvals, contact your local sales agency.
Model |
Description |
RG-SAP185-SP-W |
Wi-Fi 6 ultra-thin wall plate wireless access point Dual radios, four spatial streams, peak data rate of 2.976 Gbps Radio 1: 2.4 GHz: two spatial streams, 2x2 MU-MIMO, peak data rate of 574 Mbps Radio 2: 5 GHz: two spatial streams, 2x2 MU-MIMO, peak data rate of 2.402 Gbps It can be installed on an 86-type panel, and complies with IEEE 802.11a/b/g/n/ac and IEEE 802.11ax. It can switch between Fat, Fit, and cloud modes, and provides IEEE 802.3af/at power supply. |
Ruijie Networks websites use cookies to deliver and improve the website experience.
See our cookie policy for further details on how we use cookies and how to change your cookie settings.
Cookie Manager
When you visit any website, the website will store or retrieve the information on your browser. This process is mostly in the form of cookies. Such information may involve your personal information, preferences or equipment, and is mainly used to enable the website to provide services in accordance with your expectations. Such information usually does not directly identify your personal information, but it can provide you with a more personalized network experience. We fully respect your privacy, so you can choose not to allow certain types of cookies. You only need to click on the names of different cookie categories to learn more and change the default settings. However, blocking certain types of cookies may affect your website experience and the services we can provide you.
Through this type of cookie, we can count website visits and traffic sources in order to evaluate and improve the performance of our website. This type of cookie can also help us understand the popularity of the page and the activity of visitors on the site. All information collected by such cookies will be aggregated to ensure the anonymity of the information. If you do not allow such cookies, we will have no way of knowing when you visited our website, and we will not be able to monitor website performance.
This type of cookie is necessary for the normal operation of the website and cannot be turned off in our system. Usually, they are only set for the actions you do, which are equivalent to service requests, such as setting your privacy preferences, logging in, or filling out forms. You can set your browser to block or remind you of such cookies, but certain functions of the website will not be available. Such cookies do not store any personally identifiable information.
Contact Us
How can we help you?