Picture

RG-AM5528-SF Optical i-Share Master Access Point

Recommended for deployment in schools, hotels, medical care, office, production workshops, etc.

Models

Series

Highlight Features

Connection with APs through hybrid cables, realize long distance and fast transmission
Full 2.5G downlink optical ports, fully maximizing the AP performance
Multiple AP models allowing flexible service expansion
AP remote power-on or power-off, eliminating the need for onsite operation

Overview
FAQ
Documents
Specifications
Order Information

Key Specification

Ruijie All-Optical i-Share+ Solution — Master AP RG-AM5528-SF

All-optical architecture, point-to-point power supply for APs through hybrid cables
High-bandwidth data transmission and long-distance power supply, supporting the long-term evolution of wireless network construction in the next two decades

Specifications

Solution

All-Optical Network

Hybrid Cable

Wi-Fi 6

i-Share Mode

Power On/Off of a Single AP

24 Optical Ports and 24 PoE Ports, Hybrid Cable, Maximum Transmission Distance of 1000 m

24 optical ports and 24 power supply ports, and direct connection with optical APs through innovative hybrid cables
Only one cable for high-bandwidth data transmission and long-distance PoE power supply concurrently, simplifying the deployment of an all-optical network

Longer Distance
The connection distance between the master and micro APs is up to 1,100 m, realizing central management.

Faster Transmission
The transmission rate of the hybrid cable is up to 400 Gbps to meet the expansion requirements in the next two decades.

Superior Power Supply
The master AP can power 24 micro APs with one cable, eliminating the need for local power supply.

2.5G Optical Ports, Eliminating the Bottleneck of Gigabit Networks and Maximizing AP Performance

Full 2.5G downlink optical ports, allowing high-speed transmission of APs
Breaking the bottleneck of wired networks and providing better wireless experience for growing service needs

Multiple AP Models, Facilitating Flexible Service Expansion

The optical i-Share master AP provides the i-Share mode, supports access of micro APs, and integrates wired and wireless coverage of intensive rooms such as dormitories and hotels.
It can also switch to the common mode, provide Layer 2 switching, realize on-demand access of the ordinary wall plate APs, indoor APs, and outdoor APs, facilitating flexible service expansion.

An O/E converter is required for connecting an conventional AP with copper ports to a master AP.

P2P Power Supply Control and Remote Power-on/Power-off,
Eliminating the Need for Onsite Operation

The 24 power supply ports correspond to the downlink power ports one by one, and support visualization of power supply per circuit on the INC.
When an AP fails, each AP can be powered on or off remotely, without performing any onsite operation.

FAQ

Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.

Ask a Question

Documents

Ruijie All Optical i-Share+ Solution Catalog

Ruijie RG-AM5528-SF All-Optical i-Share+ Master Access Point Hardware Installation and Reference Guide(V1.2)

Ruijie RG-WLAN Implementation Cookbook (V4.1)

Specifications

Dimensions and Weight	RG-AM5528-SF
Dimensions (W × D × H)	442 mm × 315 mm × 43.6 mm
Rack Height	1 U
Installation Method	Rack

Port	RG-AM5528-SF
Fixed Service Ports	Uplink: 4 × 10G SFP+ ports, support for 1G SFP mode Downlink: 24 × 1G/2.5G SFP ports and 24 × PoE ports. Ports 1 to 20 support the PoE/PoE+ function, and each port supports up to a 30 W PoE power supply. Ports 21 to 24 support PoE/PoE+/PoE++, and each port supports up to 90 W PoE power supply. The maximum PoE output power is 480 W.
Fixed Management Ports	1 × RJ45 console port 1 × 10/100/1000Base-T adaptive MGMT port
Status Indicator	24 × PoE power supply status indicators 24 × 1000Base-X/2500Base-X SFP port status indicator 4 × SFP+ port indicators 1 × system indicator One power LED 1 × MGMT indicator

Power Supply and Consumption	RG-AM5528-SF
Maximum Power Consumption	< 42 W (no load) < 530 W (full load)
Input Voltage	AC input Rated voltage range: 176 to 240 V Frequency: 50–60 Hz Rated current: 4 A
Output voltage	54 V/12 V/12 V

Environment and Reliability	RG-AM5528-SF
Temperature	Operating temperature: 0ºC to 45ºC (Altitude: 0–1800 m) Note: The maximum altitude is from 1800 m to 5000 m. Every time the altitude increases by 220 m, the maximum ambient temperature is allowed to decrease by 1°C. Storage temperature: –40ºC to +70ºC
Humidity	Operating humidity: 10% to 90% RH Storage humidity: 5% to 95% RH
Fan	Support for fan speed regulating and alarm function
Compliance of Safety Regulations	GB 4943.1
EMC Certification	GB/T 9254.1

Software Specifications	RG-AM5528-SF
WLAN Functions	Maximum number of supported STAs	1536
	Recommended number of connected STAs	384
	Virtual AP service	A maximum of 64 virtual APs can be classified.
	SSID hiding	Supported
	Separate authentication mode, encryption mechanism, and VLAN attributes for each SSID	Supported
	Intelligent load balancing based on STA quantity or traffic	Supported
	STA limit	SSID-based STA limit Radio card-based STA limit
Security Functions	PSK, web, and IEEE 802.1x authentication modes	Supported
	Data encryption	WPA (TKIP), WPA-PSK, WPA2 (AES), WEP (64/128-bit)
	WeChat-based authentication	Supported (RG-WS series ACs are needed)
	QR code-based visitor authentication	Supported (RG-WS series ACs are needed)
	SM-based authentication	Supported (RG-WS series ACs are needed)
	MAB authentication	Supported (RG-WS series ACs are needed)
	Data frame filtering	Whitelist, static blacklist, dynamic blacklist
	User isolation	Supported
	Rogue AP detection and containment	Supported
	Dynamic ACL assignment	Supported
	RADIUS	Supported
	CPP	Supported
	NFPP	Supported
Routing Switching Functions	IPv4 address	Static IP address or dynamic IP address obtained via DHCP
	IPv6 CAPWAP tunneling	Supported
	ICMPv6	Supported
	IPv6 address	Manual configuration or automatic generation
	Multicast	Supported
Management and Maintenance	Network management	SNMP v1/v2c/v3 Network management via telnet, SSH, TFTP, or FTP
Management and Maintenance	Fault detection and alarm	Supported

Order Information

Model	Description
RG-AM5528-SF	Optical i-Share+ master AP in Ruijie O-Share Solution 24 × downlink 1G/2.5G SFP ports and 24 × PoE/PoE+ power supply ports. Four power supply ports support PoE/PoE/PoE++ power supply. 4 × uplink 10G SFP+ ports, low noise, and power supply included
RG-MAP852-SF-S	Micro AP in Ruijie O-Share Solution 1 × uplink 1G SFP port 1 × downlink 1G electrical port 2.4 GHz and 5 GHz frequency bands, AX1800, BOB structure, one 1G optical module of the master AP
RG-MAP852-SF-M	Micro AP in Ruijie O-Share Solution 1 × uplink 1G/2.5G SFP port 4 × downlink 1G electrical ports 2.4 GHz and 5 GHz frequency bands, AX3000 Support for Bluetooth, wall-mounted, ceiling-mounted, and faceplate-mounted installation. This product provides a 2.5G optical module and a 2.5G optical module on the master AP side.
RG-HybridP	Photoelectric hybrid pigtails. One end is the LC interface and DC connector.
RG-HybridBox	24-port hybrid box for photoelectric hybrid pigtails, which is used to connect the hybrid pigtails to the photoelectric hybrid cables
RG-OEHC-SM-1B6A2-2x0.5-I-305	Indoor single-core 2 × 0.5 mm² photoelectric hybrid cable, single roll, with a length of 305 m
RG-OEHC-SM-1B6A2-2x1.0-I-305	Indoor single-core 2 × 1.0 mm² photoelectric hybrid cable, single roll, with a length of 305 m

RG-AM5528-SF Optical i-Share Master Access Point

Connection with APs through hybrid cables, realize long distance and fast transmission

Full 2.5G downlink optical ports, fully maximizing the AP performance

AP remote power-on or power-off, eliminating the need for onsite operation

Key Specification

Ruijie All-Optical i-Share+ Solution — Master AP RG-AM5528-SF

All-optical architecture, point-to-point power supply for APs through hybrid cables High-bandwidth data transmission and long-distance power supply, supporting the long-term evolution of wireless network construction in the next two decades

Specifications

Solution

All-Optical Network

Hybrid Cable

Wi-Fi 6

i-Share Mode

Power On/Off of a Single AP

24 Optical Ports and 24 PoE Ports, Hybrid Cable, Maximum Transmission Distance of 1000 m

24 optical ports and 24 power supply ports, and direct connection with optical APs through innovative hybrid cables Only one cable for high-bandwidth data transmission and long-distance PoE power supply concurrently, simplifying the deployment of an all-optical network

Longer Distance The connection distance between the master and micro APs is up to 1,100 m, realizing central management.

Faster Transmission The transmission rate of the hybrid cable is up to 400 Gbps to meet the expansion requirements in the next two decades.

Superior Power Supply The master AP can power 24 micro APs with one cable, eliminating the need for local power supply.

2.5G Optical Ports, Eliminating the Bottleneck of Gigabit Networks and Maximizing AP Performance

Full 2.5G downlink optical ports, allowing high-speed transmission of APs Breaking the bottleneck of wired networks and providing better wireless experience for growing service needs

Multiple AP Models, Facilitating Flexible Service Expansion

P2P Power Supply Control and Remote Power-on/Power-off, Eliminating the Need for Onsite Operation

The 24 power supply ports correspond to the downlink power ports one by one, and support visualization of power supply per circuit on the INC. When an AP fails, each AP can be powered on or off remotely, without performing any onsite operation.

FAQ

Documents

Ruijie All Optical i-Share+ Solution Catalog

Ruijie RG-AM5528-SF All-Optical i-Share+ Master Access Point Hardware Installation and Reference Guide(V1.2)

Ruijie RG-WLAN Implementation Cookbook (V4.1)

Specifications

Order Information

All-optical architecture, point-to-point power supply for APs through hybrid cables
High-bandwidth data transmission and long-distance power supply, supporting the long-term evolution of wireless network construction in the next two decades

24 optical ports and 24 power supply ports, and direct connection with optical APs through innovative hybrid cables
Only one cable for high-bandwidth data transmission and long-distance PoE power supply concurrently, simplifying the deployment of an all-optical network

Longer Distance
The connection distance between the master and micro APs is up to 1,100 m, realizing central management.

Faster Transmission
The transmission rate of the hybrid cable is up to 400 Gbps to meet the expansion requirements in the next two decades.

Superior Power Supply
The master AP can power 24 micro APs with one cable, eliminating the need for local power supply.

Full 2.5G downlink optical ports, allowing high-speed transmission of APs
Breaking the bottleneck of wired networks and providing better wireless experience for growing service needs

P2P Power Supply Control and Remote Power-on/Power-off,
Eliminating the Need for Onsite Operation

The 24 power supply ports correspond to the downlink power ports one by one, and support visualization of power supply per circuit on the INC.
When an AP fails, each AP can be powered on or off remotely, without performing any onsite operation.