RG-AP630(IDA2), Wi-Fi 5 Dual-Radio 2.533 Gbps Outdoor Access Point
Models
Series
Highlight Features
- 802.11ac/802.11ac wave 2 superior wireless performance
- Built-in directional antennas, focused coverage and strong signal
- Industrial-grade product design, built-in lightning arrester
- Unified WIS cloud management, intelligent O&M
Key Specification
Product Overview
The RG-AP630(IDA2) is a wireless access point (AP) designed by Ruijie for next-generation high-speed wireless LANs. Adhering to the latest 802.11ac Wave2 standard, the AP delivers an access rate of up to 1733Mbps+800Mbps. It features security, radio frequency (RF) control, mobile access, Quality of Service (QoS), and seamless roaming. In addition, it can be managed by RG-WS series wireless access controllers (ACs) to implement wireless data forwarding, security, and access control.
The IP68 design adapts to inclement outdoor environments such as the cold and humidity. This substantially simplifies installation and maintenance. The RG-AP630(IDA2) offers flexible antenna switching and full coverage for various outdoor situations. Moreover, multi-hop and point-to-multi-points bridging enhances the deployment. The AP fed by IEEE 802.3at-compliant PoE accommodates various monitors and receives real-time monitoring information. It is perfectly suited for such sites as campuses, city blocks, and plazas.
FAQ
Documents
Ruijie RG-WLAN Series Access Points Web-based Configuration Guide, RGOS11.1(9)B1P23 (V1.0)
Ruijie RG-WLAN Series Access Points Command Reference, RGOS11.1(9)B1P23 (V1.0)
Ruijie RG-WLAN Series Access Points Configuration Guide, RGOS11.1(9)B1P23 (V1.0)
Ruijie RG-WLAN Series Access Points Release Notes, RGOS11.1(9)B1P23 (V1.0)-RG-AP630(IDA2)
Ruijie RG-AP630(IDA2) Wireless Access Point Firmware
RG-AP630 Outdoor AP Series Datasheet
Specifications
| Model |
RG-AP630(IDA2) |
|
| Target Deployments |
For big campus, wireless city, harbor, storage room, mine |
|
| Basic Specifications |
Radio |
Concurrent dual-radio dual-band |
| Protocol |
802.11a/b/g/n/ac Wave2 |
|
| Operating Bands |
802.11 b/g/n: 2.4GHz to 2.483GHz 802.11a/n/ac: 5.150GHz to 5.350GH z, 5.47GHz to 5.725GH z, 5.725GHz to 5.850GHz (vary depending on countries) |
|
| Antenna |
Built-in Directional Smart Antenna (support external/ internal antenna switching) |
|
| Antenna Lobe Orientation |
Internal Directional: Horizontal 60 degrees, Vertical 30 degrees |
|
| Antenna Gain |
10dBi |
|
| Model |
RG-AP630(IDA2) |
|
| Basic Specifications |
Max Throughput |
Build-in antenna model: 800Mbps@2.4G 1733Mbps@5G 2.533Gbps per AP; External antenna model: 600Mbps@2.4G 1300Mbps@5G 1.9Gbps per AP |
| Spatial Streams |
4 |
|
| Modulation |
OFDM: BPSK@6/9Mbps QPSK@12/18Mbps 16-QAM@24Mbps 64-QAM@48/54Mbps DSSS: DBPSK@1Mbps DQPSK@2Mbps CCK@5.5/11Mbps MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM and 256QAM |
|
| Receiver Sensitivity |
11b: -99dBm(1Mbps), -93dBm(5.5Mbps), -90dBm(11Mbps) 11a/g:-93dBm(6Mbps), -85dBm(24Mbps), -82dBm(36Mbps), - 77dBm(54Mbps) 11n:-92dBm@MCS0, -73dBm@MCS7, -92dBm@MCS8, -73dBm@MCS15 11ac HT20: -90dBm (MCS0) , -63dBm (MCS9) 11ac HT40: -85dBm(MCS0) , -60dBm (MCS9) 11ac HT80: -82dBm(MCS0) , -58dBm (MCS9) |
|
| Maximum Transmit Power |
27dBm transmit power depends on local laws and regulations. |
|
| Adjustable Power |
1dBm |
|
| IP Rating |
IP67 |
|
| Ports |
Service Port |
1 10/100/1000 Base-T ETH1/PoE IN port, 1 10/100/1000 Base-T ETH2 port, 1 1000M SFP port (combo) |
| Management Port |
1 console port (RJ45) |
|
| Power |
Power Supply |
PoE+ (802.3at) |
| Power Consumption |
<25W |
|
| WLAN |
Maximum clients per AP |
Up to 512 |
| BSSID capacity |
Up to 16 per radio Up to 32 per AP |
|
| SSID hiding |
Support |
|
| Model |
RG-AP630(IDA2) |
|
| WLAN |
Configuring the authentication mode, encryption mechanism, and VLAN attributes for each SSID |
Support |
| Remote Intelligent Perception Technology (RIPT) |
Support |
|
| X-speed |
Support |
|
| Intelligent load balancing based on the number of users or traffic |
Support |
|
| STA control |
SSID/radio-based |
|
| Bandwidth control |
STA/SSID/AP-based speed control |
|
| Preference for 5 GHz (band select) |
Support |
|
| Wireless position tracking |
Support |
|
| Dynamic Frequency Selection (DFS) |
Future Release Support |
|
| Security |
PSK, Web, and 802.1x authentication |
Support |
| Data encryption |
WPA (TKIP) , WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits) |
|
| QR code authentication |
Support |
|
| SMS authentication |
Support |
|
| PEAP authentication |
Support |
|
| Data frame filtering |
Whitelist, static/dynamic blacklist |
|
| User isolation |
Support |
|
| Rogue AP detection and countermeasure |
Support |
|
| Dynamic ACL assignment |
Support |
|
| RADIUS |
Support |
|
| CPU Protection Policy (CPP) |
Support |
|
| Network Foundation Protection Policy (NFPP) |
Support |
|
| Wireless Intrusion Detection System (WIDS) |
Support |
|
| Wireless Intrusion Prevention System (WIPS) |
Support |
|
| Routing |
IPv4 address |
Static IP address or DHCP reservation |
| IPv6 CAPWAP tunnel |
Support |
|
| ICMPv6 |
Support |
|
| IPv6 address |
|
|
| ISATAP |
Support |
|
| Multicast |
Support |
|
| Model |
RG-AP630(IDA2) |
|
| Management and Maintenance |
Network management |
SNMP v1/v2C/v3, Telnet, SSH, TFTP and web management |
| Visualized wireless heat map analysis |
Support (needs to integrated with SNC) |
|
| Real-time spectrum analysis |
Support (needs to in tegrated with SNC) |
|
| Fault detection and alarm |
Support |
|
| Cloud AC management |
Support |
|
| Statistics and logs |
Support |
|
| FAT/FIT switching |
The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC. The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet. |
|
| External Characterisitics |
Lock |
Support |
| LED Indicators |
Power status and WDS signal strength |
|
| Relevant Standard |
Wi-Fi Alliance Certification |
Support |
| Safety Standard |
GB4943, EN/IEC 60950-1, EN/IEC 60950-22 |
|
| EMC Standard |
GB9254-2008, EN301 489, |
|
| Health Standard |
EN 50385 |
|
| Radio Standard |
FCC Part15, EN300328, EN301893 |
|
| Vibration Standard |
GB/T 2423 |
|
| Specifications |
Dimensions (W x D x H) (mm) |
276 x 246 x 90 |
| Weight |
<2.5kg |
|
| Work Environment |
Temperature |
Operating Temperature: -40°C to 65°C (heater module will be enabled at -15°C) |
| Storage Temperature: |
||
| Humidity |
Operating Humidity: 0% to100% (non-condensing) |
|
| Storage Humidity: 0% to 100% (non-condensing) |
||
| Installation Mode |
Wall/pole-m ount installation |
|
Outdoor Antennas
| Model |
RG-ANTx3-2400D |
RG-ANTx3-5800D |
RG-ANTx3-2400&5800(o) |
|
| Type of External Antenna |
Directional |
Directional |
Omnidirectional |
|
| Electrical Specifications |
Frequency range |
2.4 to 2.483GHz |
5.125 to 6.100GHz |
2.4 to 2.5GHz 5.125 to 6.100GHz |
| Gain |
3 x 15dBi |
2 x 19dBi (vertical) + 16dBi (dual inclined planes) |
8 dBi |
|
| Horizontal beamwidth |
65° |
21° |
360° |
|
| Vertical beamwidth |
16° |
16° |
17° |
|
| Front-to-back ratio |
< -25 dB |
< -25 dB |
<-25 dB |
|
| VSWR |
< 1.5 |
<1.5 |
<1.5 |
|
| Polarization |
2*VP (vertical polarization)+1*HP (horizontal polarization) |
±45° and vertical polarization |
VP (vertical polarization) |
|
| Input impedance |
50 ohms |
50 ohms |
50 ohms |
|
| Mechanical Specifications |
Mounting mode |
Pole mounting |
Pole mounting |
Pole mounting |
| Temperature range |
-40°C to 60°C |
-40°C to 60°C |
-40°C to 60°C |
|
| Unit weight |
2.3 kg |
1.3 kg |
1.2 kg |
|
| Dimensions |
400 x 240 x 35 mm |
380 x 380 x 33 mm |
145 x 330 mm |
|
| Connector |
3 x N-K |
3 x N-K |
6 x N-K |
|
Order Information
| Model |
Description |
| RG-AP630(IDA2) |
Outdoor Wireless Access Point, built-in directional smart antenna and lightning arrester, support internal/external antenna switching, support concurrent 802.1 1a/b/g/n/ac and WAVE2, FAT/FIT mode, PoE+ (Installation Mount-Kit included, but PoE adaptor sold separately) |
| Optional Accessories |
|
| RG-S2910-24GT4SFP-UP-H |
24 x 10/100/1000BASE-T ports for downlink and 4 x gigabit SFP ports (non-combo) for uplink. To support HPOE (Port1~4), POE+, POE, 1 console port |
| Optional External Antennas |
|
| RG-ANTx3-2400D |
2.4 GHz MIMO outdoor directional antenna kit, include: |
| RG-ANTx3-5800D |
5.8 GHz MIMO outdoor directional antenna kit, include: |
| RG-ANTx3-2400&5800(O) |
2.4 GHz & 5.8 GHz MIMO outdoor omnidirectional antenna kit, include: |
