Ruijie RG-S5760X Series Switches RGOS12.5(4)B0702P3 Firmware

2022-11-18 View:

Catalog

Download Options

Ruijie RG-S5760X Series Switches RGOS12.5(4)B0702P3 Firmware



	Ruijie RG-S5760X Series Switches S5760X_RGOS 12.5(4)B0702P3
	Release Notes

			Document Version: V1.0 Date: 2022.09.14 Copyright © 2022 Ruijie Networks

All rights are reservedin this document and this statement.

Any reproduction,excerption, backup, modification, transmission, translation or commercial useof this document or any portion of this document, in any form or by any means,without the prior written consent of Ruijie Networks is prohibited.

Trademark and areowned by Ruijie Networks.

All othertrademarks or registered trademarks mentioned in this document are owned bytheir respective owners.

Disclaimer

The products,services, or features you purchase are subject to commercial contracts andterms. Some or all of the products, services or features described in thisdocument may not be within the scope of your purchase or use. Unless otherwiseagreed in the contract, Ruijie Networks does not make any express or impliedstatement or guarantee for the content of this document.

Due to productversion upgrades or other reasons, the content of this document will be updatedfrom time to time. Ruijie Networks reserves the right to modify the content ofthe document without any notice or prompt.

This manual is forreference only. Ruijie Networks endeavors to ensure content accuracy and willnot shoulder any responsibility for losses and damages caused due to contentomissions, inaccuracies or errors.

Preface

Intended Audience

This document isintended for:

l Networkengineers

l Technicalsupport and servicing engineers

l Networkadministrators

Technical Support

l RuijieNetworks Website: https://www.ruijienetworks.com/

l TechnicalSupport Website: https://ruijienetworks.com/support

l CasePortal: https://caseportal.ruijienetworks.com

l Community:https://community.ruijienetworks.com

l TechnicalSupport Email: service_rj@ruijienetworks.com

l Skype:service_rj@ruijienetworks.com

Conventions

1. Conversions

Convention	Description
Bold font	Commands, command options, and keywords are in bold font.
Italic font	Arguments for which you supply values are in italic font.
[ ]	Elements in square brackets are optional.
{ x \| y \| z }	Alternative keywords are grouped in braces and separated by vertical bars.
[ x \| y \| z ]	Optional alternative keywords are grouped in brackets and separated by vertical bars.
&<1-n>	The argument before the sign (&) can be input for consecutive 1- n times.
//	Double slashes at the beginning of a line of code indicate a comment line.

2. Signs

The signs used inthis document are described as follows:

Warning

An alert that calls attention to importantrules and information that if not understood or followed can result in dataloss or equipment damage.

Caution

An alert that calls attention to essentialinformation that if not understood or followed can result in function failureor performance degradation.

Note

An alert that contains additional orsupplementary information that if not understood or followed will not lead toserious consequences.

Specification

An alert that contains a description ofproduct or version support.

Version Information

1.1 Basic Information

Version Number	12.5(4)B0702P3
Applicable Products	S5760X Series Switches
Category	Pilot Release
Customers	Common
Release Date	2022-09-14
Baseline Version	12.5(4)B0702
Reason for Release	Provide the English version of EMB user interface for S5760X series switches.

Use the show version detail command to check the versionnumber.

Ruijie#show version detail

Systemdescription : Ruijie 10G Ethernet Switch(S5760C-48GT4XS-X)By Ruijie Networks

System starttime : 2022-09-13 21:08:51

Systemuptime : 0:12:12:19

System hardware version : 2.10

System software version : S5760X_RGOS12.5(4)B0702P3

System patchnumber : NA

System software number :M20071709132022

System serialnumber : MACC942571658

System bootversion : 1.4.25(Master) 1.4.22(Slave)

System rbootversion : 1.1.35

System coreversion : 4.9.190+

Module information:

Slot 0 : S5760C-48GT4XS-X

Systemuptime : 0:12:12:19

Cpu 0:

Hardwareversion : 2.10

Bootversion : 1.4.25(Master)1.4.22(Slave)

Rbootversion : 1.1.35

Softwareversion : S5760X_RGOS 12.5(4)B0702P3

Softwarenumber : M20071709132022

Serial number : MACC942571658

Note: The above show versiondetail command takes the S5760C-48GT4XS-X switch as an example. Youcan replace this model with that of other S5760 series switches when runningthis command.

Release History

Note

After the version was released, the upgradefile may be released (identified by ID) because bugs were found and resolved.

Release Date	Upgrade File	Description
2022-09-14	S5760X_RGOS12.5(4)B0702P3_install.bin	Upgrade the software of RG-S5760 series switches.

Hardware Support

Note

The hardware version number is rounded to thefirst decimal place. The numeral in the second decimal place does not changethe supporting release.

Hardware Model	Version Number	Description
RG-S5760C-24GT8XS-X	1.x	Chassis
RG-S5760C-24SFP/8GT8XS-X	1.x	Chassis
RG-S5760C-48GT4XS-X	1.x	Chassis
RG-S5760C-48GT4XS-HP-X	1.x	Chassis
RG-S5760C-48SFP4XS-X	1.x	Chassis

Note

For details, see RuijieRG-S5760X Series Switches Hardware Installation and Reference Guide.

Resolved Issues

Version	Description
12.5(4)B0702P3	Provide the English version of RG-INC-EMB user interface.

Remaining Issues

N/A

VersionChange

Version	Baseline	Description
12.5(4)B0702P3	12.5(4)B0702	Provide the English version of RG-INC-EMB user interface.

1.1 Hardware Support Change

N/A

1.2 Feature Support Change

N/A

Upgrade Instructions (12.x)

To upgrade the device to this version ordowngrade to this version, the following upgrade files are required.

Applicable Product	Upgrade File
S5760X Series Switches	Upgrade File	S5760X_RGOS12.5(4)B0702P3_install.bin
	File Description	Installation Package
	File Size	149487894 Bytes
	MD5	5e8e295168f8e4911003fa9faa119276

1. Upgradeunder the Main Program

After downloading the main program tothe PC, connect the PC NIC to the first copper port of the switch with anetwork cable.

Execute TFTPServer.EXE file on the PCand set its directory to the directory containing the target production testprogram files.

Connect the serial port of the PC tothe serial port of the switch and configure the PC’s hyperterminal baud rate to9600 (or 115200).

Power on the device and press thecombination of CRTL and C to enter the menu interface. If you areentering the command line interface, enter quit to return to the menu. The menuis displayed as follows:

====== BootLoaderMenu("Ctrl+Z" to upper level) ======

TOP menu items.

************************************************

0. Tftp utilities.

1. XModem utilities.

2. Run main.

3. SetMacutilities.

4. Scatteredutilities.

5. Set ModuleSerial

************************************************

Press a key to run the command:

Select 4 in the menu to enter thefollowing submenu:

====== BootLoaderMenu("Ctrl+Z" to upper level) ======

Scatteredutilities.

************************************************

0. Show thebootloader version.

1. Reload system.

2. Set baudrate.

3. Advancedsettings.

************************************************

Press a key to run the command:

Select 3 in the menu to enter thefollowing submenu:

====== BootLoaderMenu("Ctrl+Z" to upper level) ======

Advanced settings.

************************************************

0. Set Fast boot.

1. Set SupportShell.

2. Open/Closedebug switch.

3. Format flashfilesystem.

4. Set defaultenvironment.

5. Set RGOS mode.

************************************************

Press a key to run the command:

Select 3 in the menu for systemformatting:

Press a key to run the command: 3

Warning:It is dangerous to formatflash,Are you sure to continue? [yes/No]: y

Erasing at 0x2de0000 -- 100%complete.

Erasing at 0xfe0000 -- 100% complete.

Erasing at 0xf5e0000 -- 100%complete.

Erasing at 0xffe0000 -- 100%complete.

Creating dynamic volume data of size8634368

The flash has been formattedsuccessfully!

After the formatting, press thecombination and CRTRL and Z to return to the initial menu. Select 0 in the menuto enter the following submenu:

====== BootLoaderMenu("Ctrl+Z" to upper level) ======

Tftp utilities.

************************************************

0. Upgradebootloader.

1. Upgrade kerneland rootfs by install package.

2. Down to memoryand jump to run.

************************************************

Press a key to run the command:

Select 1, it will display as follows:

Plz enter the LocalIP:[192.168.193.50]: enter any IP address in the same network segment, andpress Enter. The following message appears:

Plz enter the RemoteIP:[192.168.193.28]: enter the IP address of the PC you are using, and pressEnter. The following message appears:

Plz enter the Filename:[ S5760X_RGOS12.5(4)B0702P3_install.bin]: enter the target program, then press Enter to start the upgrade.The following message appears:

Erasing Nand...

Erasing at 0x4e0000 -- 100% complete.

Writing to Nand... #done

Auto-update from TFTP: trying update file ' S5760X_RGOS12.5(4)B0702P3_install.bin'

Using eth-0 device

TFTP from server 172.16.1.111; our IPaddress is 172.16.1.1

Filename 'S5760X_RGOS12.5(4)B0702P3_install.bin'.

Load address: 0x82000000

Loading:#################################################################

#################################################################

########

done

Bytes transferred = 74601880 (4725598hex)

Uncompressing 0x47248f2@0x82000ca6 to0x633fda4@0x86725598

Uncompressed 0x633fda4 bytes

Move the uncompressed data(0x633fda4bytes) from 0x86725598 to 0x82000000.

Get boot addr 0x87de2f8c,len 0xdc200;kernel addr 0x820e2e88,len 0x440000; rootfs addr 0x82522f04, len 0x58c0000

Package information:

kernelversion:3.10.18.685d6b07d9c3ed

rootfsversion:1.0.0.3e33691f

bootversion:1.2.28.0c4a1bf

Determined to upgrade? [Y/N]:y //enter Y manually

Upgrading, keep power on and waitplease ...

Upgrading boot ...

Erasing Nand...

Erasing at 0x4e0000 -- 100% complete.

Writing to Nand... #done

Erasing at 0x2de0000 -- 100%complete.

Erasing at 0xf5e0000 -- 100%complete.

##########################################################################

Creating dynamic volume data of size8634368 -the actual data prevails

UBI: mtd1 is detached from ubi0

Creating 1 MTD partitions on"nand0":

0x000001000000-0x000002e00000 :"mtd=6"

UBI: attaching mtd1 to ubi0

UBI: physical eraseblocksize: 131072 bytes (128 KiB) -the actual data prevails

UBI: logical eraseblocksize: 126976 bytes -the actual data prevails

UBI: smallest flash I/Ounit: 2048

UBI: VID headeroffset: 2048 (aligned2048)

UBI: dataoffset: 4096

UBI: attached mtd1 to ubi0

UBI: MTD devicename: "mtd=6"

UBI: MTD devicesize: 30 MiB

UBI: number of goodPEBs: 240

UBI: number of bad PEBs: 0

UBI: max. allowedvolumes: 128

UBI: wear-levelingthreshold: 4096

UBI: number of internal volumes: 1

UBI: number of uservolumes: 1

UBI: availablePEBs: 19

UBI: total number of reserved PEBs:221

UBI: number of PEBs reserved for badPEB handling: 2

UBI: max/mean erase counter: 1/0

UBIFS: mounted UBI device 0, volume0, name "kernel"

UBIFS: mounted read-only

UBIFS: file system size: 26030080 bytes (25420 KiB, 24 MiB, 205 LEBs) -the actual data prevails

UBIFS: journalsize: 3682304 bytes (3596 KiB, 3 MiB, 29LEBs) -the actual data prevails

UBIFS: mediaformat: w4/r0 (latest is w4/r0)

UBIFS: default compressor: LZO

UBIFS: reserved for root: 0bytes (0 KiB)

finding an appropriatekernel...vmlinux-3.10.18.685d6b07d9c3ed

Loading file'vmlinux-3.10.18.685d6b07d9c3ed' to addr 0x82000000 with size 2016097(0x001ec361)...

Done

current rootfs:1

current kernalname:vmlinux-3.10.18.685d6b07d9c3ed

Erasing at 0xfe0000 -- 100% complete.

Erasing Nand...

Erasing at 0x4e0000 -- 100% complete.

Writing to Nand... #done

SUCCESS: UPGRADING OK.

The final prompt “SUCCESS: UPGRADINGOK.” indicates the upgrade success and requires a reboot of the switch beforethe new version takes effect.

Run the “show version detail”command to confirm the upgrade success:

Ruijie#show version detail

Systemdescription : Ruijie 10G Ethernet Switch(S5760C-48GT4XS-X)By Ruijie Networks

System starttime : 2022-09-13 21:08:51

Systemuptime : 0:12:12:19

System hardware version : 2.10

System software version : S5760X_RGOS12.5(4)B0702P3

System patchnumber : NA

System software number :M20071709132022

System serialnumber : MACC942571658

System bootversion : 1.4.25(Master) 1.4.22(Slave)

System rboot version : 1.1.35

System coreversion : 4.9.190+

Module information:

Slot 0 : S5760C-48GT4XS-X

Systemuptime : 0:12:12:19

Cpu 0:

Hardwareversion : 2.10

Bootversion : 1.4.25(Master)1.4.22(Slave)

Rbootversion : 1.1.35

Softwareversion : S5760X_RGOS 12.5(4)B0702P3

Softwarenumber : M20071709132022

Serialnumber : MACC942571658

Note: The above show versiondetail command takes the S5760C-48GT4XS-X switch as an example. Youcan replace this model with that of other S5760 series switches when runningthis command.

Ruijie RG-S5760X Series Switches RGOS12.5(4)B0702P3 Firmware

Download Options

Version Information

1.1 Basic Information

Release History

Hardware Support

Resolved Issues

Remaining Issues

VersionChange

1.1 Hardware Support Change

1.2 Feature Support Change

Related Documentation

Upgrade Instructions (12.x)