Back

Compare Products

Hide

Clear All

VS

Home> Support> Downloads>

Ruijie RG-AP180 Wireless Access Point RGOS11.9(6)W1B1 Firmware

2022-09-21 View:
版本发行说明模板

 

 

 

 

Ruijie RG-WLAN Series Access Points AP_RGOS11.9(6)W1B1

 

 

Release Notes

 

 

 

Document Version: V1.4

Date: 2022-06-02

Copyright © 2022 Ruijie Networks

 

 

 

 


Copyright

Copyright © 2022 Ruijie Networks

All rights are reserved in this document and thisstatement.

Any reproduction, excerption, backup, modification, transmission,translation or commercial use of this document or any portion of this document,in any form or by any means, without the prior written consent of RuijieNetworks is prohibited.

Trademark  and areowned by Ruijie Networks.

All other trademarks or registered trademarks mentioned inthis document are owned by their respective owners.

Disclaimer

The products, services, or features you purchase aresubject to commercial contracts and terms. Some or all of the products,services or features described in this document may not be within the scope ofyour purchase or use. Unless otherwise agreed in the contract, Ruijie Networksdoes not make any express or implied statement or guarantee for the content ofthis document.

Due to product version upgrades or other reasons, thecontent of this document will be updated from time to time. Ruijie Networksreserves the right to modify the content of the document without any notice orprompt.

This manual is for reference only. Ruijie Networksendeavors to ensure content accuracy and will not shoulder any responsibilityfor losses and damages caused due to content omissions, inaccuracies or errors.

 


Preface

Intended Audience

Thisdocument is intended for:

l  Network engineers

l  Technical support and servicing engineers

l  Network administrators

TechnicalSupport

l  Ruijie Networks Website: https://www.ruijienetworks.com/

l  Technical Support Website: https://ruijienetworks.com/support

l  Case Portal: https://caseportal.ruijienetworks.com

l  Community: https://community.ruijienetworks.com

l  Technical Support Email: service_rj@ruijienetworks.com

Conventions

1.     Conversions

Convention

Description

Bold font

Commands, command options, and keywords are in bold font.

Italic font

Arguments for which you supply values are in italic font.

[ ]

Elements in square brackets are optional.

{ x | y | z }

Alternative keywords are grouped in braces and separated by vertical bars.

[ x | y | z ]

Optional alternative keywords are grouped in brackets and separated by vertical bars.

&<1-n>

The argument before the sign (&) can be input for consecutive 1- n times.

//

Double slashes at the beginning of a line of code indicate a comment line.

 

2.     Signs

Thesigns used in this document are described as follows:

 

*     Warning

Analert that calls attention to important rules and information that if notunderstood or followed can result in data loss or equipment damage.

 

*    Caution

An alert that callsattention to essential information that if not understood or followed canresult in function failure or performance degradation.

 

*     Note

An alert that contains additionalor supplementary information that if not understood or followed will not leadto serious consequences.

 

*     Specification

An alert that containsa description of product or version support.

 


Contents

Preface............................................................................................................................................. i

1 Version Information....................................................................................................................... 1

2 Revision History............................................................................................................................ 2

3 Feature Description....................................................................................................................... 3

3.1 New Features....................................................................................................................... 3

3.2 Modified Features................................................................................................................. 3

4 Resolved Issues............................................................................................................................ 4

5 Known Issues............................................................................................................................... 5

6 Compatibility Description............................................................................................................... 6

6.1 Hardware Description........................................................................................................... 6

7 Upgrade Instructions..................................................................................................................... 7

7.1 Upgrade Files....................................................................................................................... 7

7.1.1 RG-AP180 Series...................................................................................................... 7

7.1.2 RG-AP820 Series...................................................................................................... 7

7.1.3 RG-AP840 Series...................................................................................................... 8

7.1.4 RG-AP680 Series...................................................................................................... 8

7.2 Upgrade Requirements......................................................................................................... 8

7.3 Precautions........................................................................................................................... 8

8 Related Documentation................................................................................................................. 9

 

 


Version Information

Version Number

AM_RGOS11.9(6)W1B1

Version Type

Official release

Applicable Products

RG-AP180 series

RG-AP820 series

RG-AP840 series

RG-AP680 series

 

AC Version: AC_RGOS11.9(6)B2 or later

Note: The APs can connect to ACs not in AC_RGOS11.9(6)W1B1 or later versions, but the new features in this release are unavailable.

Applicable Clients

Common

Release Type

Official release

Release Date

2022-06-02

Based Version Number

AP_RGOS11.9(6)B9, Release(09150411)

Scenario Description

Common features enhanced


Revision History

Release Date

Version Number

Status

2022-02-11

AP_RGOS11.9(6)W1B1, Release(0914xxxx)

Upgrade is required.

2022-03-07

AP_RGOS11.9(6)W1B1, Release(0915xxxx)

Upgrade is required.

2022-04-01

AP_RGOS11.9(6)W1B1, Release(0916xxxx)

Upgrade is required.

2022-05-13

AP_RGOS11.9(6)W1B1, Release(0917xxxx)

Discarded


Feature Description

1.1   New Features

Feature

Source of Demand

Description

WPA3

Market

This latest wireless security standard supports only personal version and enterprise version at present and does not support OWE.

Reverse SSH tunnel

Internal

The MACC and WIS can access the Telnet and EWEB of APs through the reverse SSH tunnel.

Key packet tracking

Internal

This feature tracks and records key communication packets of STAs and can export them in PCAP format.

Security

Market

HTTPS third-party certificates can be imported. This prevents security prompts on the EWEB login interface.

 WLAN

Internal

Radio configuration commands such as TxBF and AMSDU are added.

 

1.2   Modified Features

Feature

Source of Demand

Change Description

Country code

Market

Country codes are supplemented.

EWEB

Market

802.11 protocol configuration is supported.

WIS

Internal

DHCP packet interaction parsing is added.


Resolved Issues

Issue ID

Description

BUG-773542

AP850 crashes occasionally.

BUG-761407

For STAs whose MAC addresses match the format of xxxx.0800.xxxx, the uplink packets are misjudged as 802.3 packets, causing connection failure.

BUG-758428

When the data-plane arp-control command is run on an AC, some AP configurations lose.

BUG-754496

CPU idle crashes occasionally occur on APs in idle status.

BUG-747630

In the case of a power failure, the configuration of the auto-cfg save file flash:speed.txt function may change to 0 bytes, causing configuration loss and communication exceptions.

QC-56478

AM5528 port flapping causes MAC entry aging failure.

QC-55631

Power-on failures occasionally occur on MAP852-SF.

QC-58089

Simplified optical i-Share AM host and MAP high-concurrency going-online fails.

QC-58673

Many MAPs go offline at Guangxi Vocational Normal University.

QC-58987

In layer-3 roaming, large packets are lost due to abnormal fragmentation in the roaming tunnel.



Compatibility Description

1.1   Hardware Description

The following tablelists the models and version numbers of hardware supported by the currentrelease.

Model

Hardware Version Number

Description

RG-AP180

V1.xx

Wireless access point, one 1G WAN port, four 1G LAN ports, built-in antenna, supporting dual-radio in 2.4G+5G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols

RG-AP180

V2.xx

Wireless access point, one 1G WAN port, four 1G LAN ports, built-in antenna, supporting dual-radio in 2.4G+5G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols

RG-AP180

V3.xx

Wireless access point, one 1G WAN port, four 1G LAN ports, built-in antenna, supporting dual-radio in 2.4G+5G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols

RG-AP180

V4.xx

Wireless access point, one 1G WAN port, four 1G LAN ports, built-in antenna, supporting dual-radio in 2.4G+5G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols

RG-AP680(CD)

V1.xx

Wireless access point, one 1G uplink port, one 1G optical port, built-in directional antenna, supporting dual-radio in 2.4G+5G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols and Bluetooth serial ports

RG-AP820-L (V2)

V1.xx

Wireless access point, one 1G uplink port, built-in antenna, supporting dual-radio in 2.4G+5G or 5.2G+5.8G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols

RG-AP820-L (V2)

V2.xx

Wireless access point, one 1G uplink port, built-in antenna, supporting dual-radio in 2.4G+5G or 5.2G+5.8G modes with 2×2+2×2 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols

RG-AP840-I

V1.xx

Wireless access point, two 1G uplink ports + one 1G IoT port, built-in antenna, supporting dual-radio in 2.4G+5G modes with 2×2+4×4 spatial streams, supporting 802.11a/b/g/n/ac/ax protocols


Upgrade Instructions

1.1   Upgrade Files

1.1.1  RG-AP180 Series

File Name

AP_RGOS11.9(6)W1B1_S2X2-09_09180101_install.bin

Description

Upgrade package (common version)

Size

23364771 bytes

Applicable Products

RG-AP180 V2.xx

RG-AP180 V3.xx

RG-AP180 V4.xx

MD5

b8f7026328ab195f5abc9400cb9911fc

Software Version

AP_RGOS11.9(6)W1B1, Release(09180101)

 

1.1.2  RG-AP820 Series

File Name

AP_RGOS11.9(6)W1B1_S2X2-05_09180101_install.bin

Description

Upgrade package (common version)

Size

25272807 bytes

Applicable Products

RG-AP820-L(V2) V1.xx

RG-AP820-L(V2) V2.xx

MD5

840b92553ad738a3d7e2133fc6c13e03

Software Version

AP_RGOS11.9(6)W1B1, Release(09180101)

 

1.1.3  RG-AP840 Series

File Name

AP_RGOS11.9(6)W1B1_S2X4-01_09173122_install.bin

Description

Upgrade package (common version)

Size

27909352 bytes

Applicable Product

RG-AP840-I V1.xx

MD5

38db21a18c89f261b4e3b4c5dd526b4d

Software Version

AP_RGOS11.9(6)W1B1, Release(09173122)

 

1.1.4  RG-AP680 Series

File Name

AP_RGOS11.9(6)W1B1_S2X2-06_09180101_install.bin

Description

Upgrade package (common version)

Size

25735897 bytes

Applicable Products

RG-AP680(CD) V1.xx

MD5

dc49e45fc819afe9c80c20d5ac2b6437

Software Version

AP_RGOS11.9(6)W1B1, Release(09180101)

 

 

1.2  Upgrade Requirements

N/A

1.3   Precautions

l  Upgrade can be performed on site only after successful experimentalverification.

l  Please perform a database backup before upgrading thedevice.

l  If a prompt message appears during the upgrade,indicating that restart is not allowed, do not power off the device, reset thesystem, or plug in/unplug any module.

l  During the upgrade and downgrade, pay attention to theprompt messages. If failures occur, please save the log and contact us fortechnical assistance.

l  After the upgrade and downgrade, run the show versiondetail command to check the current device version. If it is the targetversion, the upgrade succeeds.

Related Documentation

*     Note

The related documentsare subject to change or update without prior notification. For details, pleaselog in to the official website of Ruijie Networks: http://www.ruijienetworks.com/

 

How do you like this document ?

Suggestion


(0/255)

Can we contact you to discuss your suggestion?

Privacy Policy
Thank you. We will inform you of our response as soon as possible.
Thank you again for your valuable input!
This page will be closed in 5 s…
Submit
Document Questionnaire
We sincerely invite you to fill in this questionnaire on Ruijie document acquisition and user experience.
No
Yes

Ruijie Networks websites use cookies to deliver and improve the website experience.

See our cookie policy for further details on how we use cookies and how to change your cookie settings.

Cookie Manager

When you visit any website, the website will store or retrieve the information on your browser. This process is mostly in the form of cookies. Such information may involve your personal information, preferences or equipment, and is mainly used to enable the website to provide services in accordance with your expectations. Such information usually does not directly identify your personal information, but it can provide you with a more personalized network experience. We fully respect your privacy, so you can choose not to allow certain types of cookies. You only need to click on the names of different cookie categories to learn more and change the default settings. However, blocking certain types of cookies may affect your website experience and the services we can provide you.

  • Performance cookies

    Through this type of cookie, we can count website visits and traffic sources in order to evaluate and improve the performance of our website. This type of cookie can also help us understand the popularity of the page and the activity of visitors on the site. All information collected by such cookies will be aggregated to ensure the anonymity of the information. If you do not allow such cookies, we will have no way of knowing when you visited our website, and we will not be able to monitor website performance.

  • Essential cookies

    This type of cookie is necessary for the normal operation of the website and cannot be turned off in our system. Usually, they are only set for the actions you do, which are equivalent to service requests, such as setting your privacy preferences, logging in, or filling out forms. You can set your browser to block or remind you of such cookies, but certain functions of the website will not be available. Such cookies do not store any personally identifiable information.

Accept All

View Cookie Policy Details

Contact Us

Contact Us

How can we help you?

Contact Us

Get an Order help

Contact Us

Get a tech support