Ruijie RG-EAP602 Series Access Point AP_3.0(1)B2P55 Firmware
B2P55&AP_3.0(1)B11P55.files/image010.gif){kind=small}
RuijieRG-EAP and RG-RAP Series Access Points Release Notes, AP_3.0(1)B2P55&AP_3.0(1)B11P55
B2P55&AP_3.0(1)B11P55.files/image011.gif){kind=small}
Release Date: July 10, 2021
Contents
This document includes the following sections:
n Upgrade Files
Basic Information
Table 1 Basic Information of the Current Release
| AP_3.0(1)B2P55&AP_3.0(1)B11P55 | |
| Applicable Product | QCA Access Points: RG-EAP602 v1.00 RG-EAP602 v2.00
MTK Access Points: RAP2200(E) v1.00 RAP2200(F) v1.00 RAP1200(F) v1.00 RAP1200(P) v1.00 |
| Category | Official Release |
HardwareSupported
Table 2 Hardware Models
| Hardware Model | Version | Description |
| RG-EAP602 | 1.00/2.00 | Outdoor access point, 2.4 GHz dual streams, 5.8 GHz dual streams, 802.11b/g/n and 802.11a/n/ac |
| RG-RAP2200(E) | 1.00 | Indoor access point, 2.4 GHz dual streams, 5.8 GHz dual streams, 802.11b/g/n and 802.11a/n/ac. The wired port supports a rate of 1000Mpbs. |
| RG-RAP2200(F) | 1.00 | Indoor access point, 2.4 GHz dual streams, 5.8 GHz dual streams, 802.11b/g/n and 802.11a/n/ac. The wired port supports a rate of 100Mpbs. |
| RG-RAP1200(F) | 1.00 | Panel-type access point, 2.4 GHz dual streams, 5.8 GHz dual streams, 802.11b/g/n and 802.11a/n/ac. The wired port supports a rate of 100Mpbs. |
| RG-RAP1200(P) | 1.00 | Panel-type access point, 2.4 GHz dual streams, 5.8 GHz dual streams, 802.11b/g/n and 802.11a/n/ac. The wired port supports a rate of 1000Mpbs. Support PoE output to 802.3 AF-compliant PD. |
B2P55&AP_3.0(1)B11P55.files/image002.jpg){kind=small}
For details, see Ruijie RG-RAP and RG-EAP SeriesAccess Points Hardware Installation and Reference Guide.
New Features
This section describes the new features.
SSID-based Whitelist/Blacklist
| Feature | SSID-based whitelist and blacklist are supported. |
| CLI Command | N/A |
| Required Release | OW3.0(1)B2P32 or later |
OUI-based Whitelist/Blacklist
| Feature | OUI-based whitelist and blacklist are supported |
| CLI Command | N/A |
| Required Release | OW3.0(1)B2P32 or later |
Band Steering
| Feature | Band steering is supported. |
| CLI Command | N/A |
| Required Release | OW3.0(1)B2P32 or later |
Load Balancing
| Feature | Load balancing is supported. |
| CLI Command | N/A |
| Required Release | OW3.0(1)B2P32 or later |
AP VLAN Port
| Feature | All new Wi-Fi networks work in bridge mode by default. |
| CLI Command | N/A |
| Required Release | OW3.0(1)B2P32 or later |
WIO
| Feature | WIO is supported. |
| CLI Command | N/A |
| Required Release | OW3.0(1)B2P55 or later |
Wifi6 switch
| Feature | Wifi6 switch is supported. |
| CLI Command | N/A |
| Required Release | OW3.0(1)B2P55 or later |
Encryption type
| Feature | Encryption type is same as enterprise AP, Support roaming switch with enterprise AP. |
| CLI Command | N/A |
| Required Release | OW3.0(1)B2P55 or later |
New countries
| Feature | New country code: Tunisia(TN)、Cyprus(CY)、Albania(AL). |
| CLI Command | N/A |
| Required Release | OW3.0(1)B2P55 or later |
FixedBugs
Table 3 Fixed Bugs
| No. | Bug Description |
| 1 | An error occurred to the management frame power when the access point was upgraded. |
| 2 | Click an ES series switch on the switch management page, and the “401 authentication failed.” Message would appear. |
| 3 | Disable the function of sending DHCP Discover message periodically. |
| 4 | Solve the problem caused by the timeout of APP deployment. Affected area: all products。 |
UpgradeFiles
Table 4 Upgrade File
| Upgrade File | File Size | MD5 | |
| RG-EAP602 v1.00 RG-EAP602 v2.00 | AP_3.0(1)B2P55_EAP602_08190602.tar.gz | 7,735,331 bytes | 15FFCDD184713B840369A5EAE27FB78B |
| RAP2200(E) v1.00 | AP_3.0(1)B11P55_EAP212(G)_08190602.tar.gz | 6,960,774 bytes | 7B8CAF16BCA1388346C2CC84234707DC |
| RAP2200(F) v1.00 RAP1200(F) v1.00 | AP_3.0(1)B11P55_EAP212(F)_08190602.tar.gz | 6,953,701 bytes | B976F0CA6BD1A9753B53B4AC56CDA0AA |
| RAP1200(P) v1.00 | AP_3.0(1)B11P55_RAP1200(P)_08190602.tar.gz | 6,844,915 bytes | 12D58701A3D85AF96260548878B23FAE |
UpgradeTips
The following are some tips for upgrading:
n There is no need to upgrade BOOT.
n The RG-EAP and RG-RAP series access points can be upgraded on bothWeb and Ruijie Cloud. This document only introduces upgrade steps on Web.
n The RG-EAP and RG-RAP series access points can be upgraded on Web,including local upgrade and online upgrade. This document only introduces localupgrade.
n During the upgrade, pay attention to the prompt messages. Iffailures occur, please save the log and contact us for technical assistance.
n During the upgrade, it is recommended you not power off or reset thesystem, or plug/unplug any module.
B2P55&AP_3.0(1)B11P55.files/image007.gif){kind=small}
Waita few minutes after upgrade finishes and log into Web to check whether the deviceis upgraded to the target version. For details, please see Ruijie RG-EAP andRG-RAP series access points Web-Based Configuration Guide.
Thank you. We will inform you of our response as soon as possible. 
