Ruijie RG-S7805C Series Switch RGOS 11.0(4)B19P1 Firmware
B19P1.files/image006.jpg)
B19P1.files/image007.gif){kind=small}
Contents
This document includes the followingsections:
Basic Information
Table 1 lists the basic information of thecurrent release.
Table 1 Basic Information of the CurrentRelease
| S7805C_RGOS11.0(4)B19P1 | |
| Previous Release | S7800C_RGOS 11.0(4)B19 |
| Applicable Product | RG-S7805C |
| Category | Official release |
Use the show version command todisplay information about the software version.
s7805c#show ver
Systemdescription : Ruijie High-density IPv6 100G CoreRouting Switch(S7805C) By Ruijie Networks
System starttime : 2019-04-17 10:03:21
Systemuptime : 0:00:05:21
System hardwareversion : 1.00
System softwareversion : S7800C_RGOS 11.0(4)B19P1
System patchnumber : NA
System serialnumber : 1234942570014
System bootversion : 1.2.33
Moduleinformation:
Slot M2: M7805C-CM
Hardware version : 1.00
Boot version : 1.2.33
Software version : S7800C_RGOS 11.0(4)B19P1
Serial number : 1234942570014
Slot 3 :M7800C-24GT24SFP4XS-EA
Hardware version : 1.00
Boot version : 1.2.33
Software version : S7800C_RGOS 11.0(4)B19P1
Serial number : 1234942570010
s7805c#
s7805c#show verdetail
Systemdescription : Ruijie High-density IPv6 100G CoreRouting Switch(S7805C) By Ruijie Networks
System starttime : 2019-04-17 10:03:22
Systemuptime : 0:00:05:26
System hardwareversion : 1.00
System softwareversion : S7800C_RGOS 11.0(4)B19P1
System patchnumber : NA
System softwarenumber : M23363402252019
System serialnumber : 1234942570014
System bootversion : 1.2.33.d2dbf56(170703)
System coreversion : 2.6.32.87f41439eeb885
System cpupartition : 2-3
Moduleinformation:
Slot M2: M7805C-CM
Hardware version : 1.00
Boot version : 1.2.33.d2dbf56(170703)
Software version : S7800C_RGOS 11.0(4)B19P1
Software number : M23363402252019
Serial number : 1234942570014
Slot 3 :M7800C-24GT24SFP4XS-EA
Hardware version : 1.00
Boot version : 1.2.33.d2dbf56(170703)
Software version : S7800C_RGOS 11.0(4)B19P1
Software number : M23261002252019
Serial number : 1234942570010
s7805c#
Hardware Supported
Table 2 shows the hardware supported bythe RGOS 11.0(4)B19P1.
Table 2 Hardware Models
| Hardware Model | Version | Description |
| RG-S7805C | 1.0x | Chassis |
| M7805C-CM | 1.0x | Supervisor module |
| M7800C-48GT4XS-EA | 1.0x | Line card |
| M7800C-36GT12SFP4XS-EA | 1.0x | Line card |
| M7800C-48SFP4XS-EA | 1.0x | Line card |
| M7800C-24SFP/12GT4XS-EA | 1.0x | Line card |
| M7800C-24GT24SFP4XS-EA | 1.0x | Line card |
| PA300I-F | 1.0x | Power module |
B19P1.files/image002.jpg){kind=small}
The hardware version number is rounded to thefirst decimal place. The numeral in the second decimal place does not changethe supporting release.
For details, see Ruijie RG-S7800C SeriesSwitches Hardware Installation and Reference Guide.
New Features
Table 3 shows the new feature supported byRGOS 11.0(4)B19P1.
Table 3 New Feature
| Module | Description |
| MACC | MACC is supported. |
Resolved Issues
Table 4 describes the fixed bugs..
| No. | Description |
| 1 | After 60 SVI IPv6 gateways were shut down, the IPv6-based routes were missing, causing an IPv6 network error. |
| 2 | The username was displayed incompletely due to a snprintf interface error. |
| 3 | A radius server disconnection caused the missing of the AAA group. |
| 4 | Enable RLDP based on multiple VLANs. After a loop was detected on a VLAN, detection stopped and the loops on the other VLANs would not be identified. |
| 5 | After the uplink and downlink routers were rebooted, static routing on S7805C failed. |
| 6 | After the device was upgraded, CWMP triggered a rollback, causing a reboot. |
Related Documentation
n Ruijie RG-S7805C Series Switches RGOSConfiguration Guide, Release 11.0(4)B19P1
This manual describes the various network protocols and their implementationprinciples for the RG-S7805C series with the detailed configuration examples.
n Ruijie RG-S7805C Series Switches RGOS CommandReference, Release 11.0(4)B19P1
This manual describes the configuration commands related to the various networkprotocols supported on the RG-S7805C series switches RGOS 11.0(4)B19P1 version in detail, including thecommand mode, parameter description, usage guide, and configuration examples.
You can obtain the related documents at: http://www.ruijienetworks.com/.
Upgrade Files
Table 5 LatestUpgrade Firmware
| Applicable Model | Upgrade Firmware | File Size | MD5 |
| M7805C-CM | S7805C_RGOS11.0(4)B19P1_install.bin | 227,882,780 bytes | f2bd371f40ea430fb6f4062c0c17742c |
Upgrade Tips
The following are some tips for upgradingthe RG-S7805C Series Switches RGOS 11.0(4)B19P1:
n Space requirements: 512 MB flash & 1,024 MB memory.
n During the upgrade and downgrade, pay attentionto the prompt messages. If failures occur, please save the log and contact usfor technical assistance.
n During the upgrade and downgrade, it isrecommended you not power off or reset the system, or plug/unplug any module.
n Use the show version command to check thefirmware after the upgrade/downgrade.
Thank you. We will inform you of our response as soon as possible. 
