Compare Products
Hide
VS
This document includes the followingsections:
n Changed Features
Table 1 lists the basic information of thecurrent release.
Table 1 Basic Information of the CurrentRelease
S5700H_RGOS 11.4(1)B70P1 | |
Previous Release | S5700H_RGOS 11.4(1)B42P1 |
Applicable Product | S5700H Series Switch |
Category | Official release |
Run the show version command to display the information.
Ruijie#showversion
Systemdescription : Ruijie 10G EthernetSwitch(S5750C-48GT4XS-H) By Ruijie Networks
Systemstart time : 2019-09-30 21:54:05
Systemuptime : 1:02:19:18
Systemhardware version : 1.40
Systemsoftware version : S5700H_RGOS 11.4(1)B70P1
Systempatch number : NA
Systemserial number : G1M109S003135
Systemboot version : 1.2.36
Moduleinformation:
Slot 0 : S5750C-48GT4XS-H
Cpu0:
Hardware version : 1.40
Boot version : 1.2
Software version : S5700H_RGOS 11.4(1)B70P1
Serial number : G1M109S003135
Ruijie#showversion detail
Systemdescription : Ruijie 10G Ethernet Switch(S5750C-48GT4XS-H)By Ruijie Networks
Systemstart time : 2019-09-30 21:54:06
Systemuptime : 1:02:20:05
Systemhardware version : 1.40
Systemsoftware version : S5700H_RGOS 11.4(1)B70P1
Systempatch number : NA
Systemsoftware number : M01480508222019
Systemserial number : G1M109S003135
Systemboot version : 1.2.36.72cc987(180528)
Systemcore version : 3.10.18.7b6045c24ccdfb
System cpupartition : 1
Moduleinformation:
Slot 0 : S5750C-48GT4XS-H
Cpu0:
Hardware version : 1.40
Boot version : 1.2.36
Software version : S5700H_RGOS 11.4(1)B70P1
Software number : M01480508222019
Serial number : G1M109S003135
Table 2 shows the hardware supported bythe RGOS 11.4(1)B70P1.
Table 2 Supporting Hardware Models
Hardware Model | Version | Description |
S5750C-28GT4XS-H | 1.00 | Switch |
S5750C-28SFP4XS-H | 1.00 | Switch |
S5750C-48GT4XS-H | 1.00 | Switch |
S5750C-48SFP4XS-H | 1.00 | Switch |
S5750-48GT4XS-HP-H | 1.00 | Switch |
M5000H-01QXS | 1.00 | Expansion module |
M5000H-04XS | 1.00 | Expansion module |
RG-PD70I | 1.00 | Power supply |
RG-PA70I | 1.00 | Power supply |
RG-PA150I-F | 1.00 | Power supply |
RG-M5000-AC500P | 1.00 | Power supply |
RG-M5000-DC500P | 1.00 | Power supply |
RG-M5000E-PA1150F | 1.00 | Power supply |
The hardware version number is rounded to thefirst decimal place. The numeral in the second decimal place does not changethe supporting release.
For detail, see RG-S5700H Series SwitchHardware Installation and Reference Guide.
This section describes the fixed bugs.
Table 3 Fixed Bugs Based on 11.4(1)B42P1
No. | Description |
1 | Commands containing shell could be run on any port. |
2 | When an S5750C-28SFP4XS-H or RG-S5750C-48SFP4XS-H is booting, forwarding exceptions could occur. |
3 | In the default mode (energy-saving mode), the 802.3BT standard was not supported on PoE ports. |
4 | When an S57 series switch was deployed between the DHCP relay agent and the server, some client terminals (a switch model of H3C) failed to obtain dynamic addresses. |
5 | Failures in forwarding multicast packets led to video lag. |
N/A
Module | MACC |
Function Change | The Web UI and CLI are optimized. |
CLI Change | Simplified command: acs url { url | macc } |
Web Change | A page for CWMP configurations is provided. |
MIB Change | N/A |
Module | Web Management |
Function Change | By default, Web management is not accessible. |
CLI Change | N/A |
Web Change | Web UI is not available when the switch is connected for the first time. |
MIB Change | N/A |
Module | Web Management |
Function Change | General administrators cannot visit pages that they are not authorized to. |
CLI Change | N/A |
Web Change | General administrators are not allowed to operate Web management. |
MIB Change | N/A |
Module | Web Management |
Function Change | HTTP is redirected to HTTPS automatically. |
CLI Change | New commands: web-server http redirect-to-https web-server https certificate web-server https generate self-signed-certificate |
Web Change | If both HTTP and HTTPS services are enabled, HTTP is redirected to HTTPS. HTTP pages can be visited when only HTTP service is enabled. |
MIB Change | N/A |
Module | SSH |
Function Change | The monitoring port ID for the SSH server can be changed. |
CLI Change | New command: ip ssh port |
Web Change | N/A |
MIB Change | N/A |
Module | Interface |
Function Change | The functionality of port oscillation protection is added. |
CLI Change | New command: port-dither protect |
Web Change | N/A |
MIB Change | N/A |
Module | Interface |
Function Change | N/A |
CLI Change | New command: You can run the show interfaces ethernet brief command to view Ethernet information of interfaces. Modified command: The output of the show interfaces status command now displays the total rate of all member ports rather than the rate of the aggregation port. |
Web Change | N/A |
MIB Change | N/A |
Module | ARP |
Function Change | Active ARP resolution can be enabled during active/standby switchovers. |
CLI Change | New command: arp switch-over resolve |
Web Change | N/A |
MIB Change | N/A |
n RG-S5700H Series Switch RGOS Command Reference,Release 11.4(1)B70P1
This manual describes the configuration commands related to the various networkprotocols supported on the RG-S5700H series switch RGOS11.4(1)B70P1 in detail,including the command mode, parameter description, usage guide, andconfiguration examples.
n RG-S5700H Series Switch RGOS Web-Based ConfigurationGuide, Release 11.4(1)B70P1
Thismanual describes how to configure the wireless controller through Web.
n RG-S5700H Series Switch Hardware Installationand Reference Guide
This manual introduces the functional and physical features of the S5700Hseries switch and provides the device installation steps, hardwaretroubleshooting, module technical specifications, and specifications and usageguidelines for cables and connectors.
You can obtain the related documents at: http://www.ruijienetworks.com/.
Applicable Product | Upgrade Firmware | File Size | MD5 |
S5750C-28GT4XS-H S5750C-28SFP4XS-H S5750C-48GT4XS-H S5750C-48SFP4XS-H S5750-48GT4XS-HP-H | S5700H_RGOS11.4(1)B70P1_install.bin | 81,119,924 bytes | efd85e34b3668bcfee76912348ee8971 |
The following are some tips for upgradingthe RG-S5700H:
n During the upgrade and downgrade, pay attentionto the prompt messages. If failures occur, please save the log and contact usfor technical assistance.
n During the upgrade and downgrade, it isrecommended you not power off or reset the system, or plug/unplug any module.
n Use the show version command to check thefirmware after the upgrade/downgrade.
How do you like this document ?
Ruijie Networks websites use cookies to deliver and improve the website experience.
See our cookie policy for further details on how we use cookies and how to change your cookie settings.
Cookie Manager
When you visit any website, the website will store or retrieve the information on your browser. This process is mostly in the form of cookies. Such information may involve your personal information, preferences or equipment, and is mainly used to enable the website to provide services in accordance with your expectations. Such information usually does not directly identify your personal information, but it can provide you with a more personalized network experience. We fully respect your privacy, so you can choose not to allow certain types of cookies. You only need to click on the names of different cookie categories to learn more and change the default settings. However, blocking certain types of cookies may affect your website experience and the services we can provide you.
Through this type of cookie, we can count website visits and traffic sources in order to evaluate and improve the performance of our website. This type of cookie can also help us understand the popularity of the page and the activity of visitors on the site. All information collected by such cookies will be aggregated to ensure the anonymity of the information. If you do not allow such cookies, we will have no way of knowing when you visited our website, and we will not be able to monitor website performance.
This type of cookie is necessary for the normal operation of the website and cannot be turned off in our system. Usually, they are only set for the actions you do, which are equivalent to service requests, such as setting your privacy preferences, logging in, or filling out forms. You can set your browser to block or remind you of such cookies, but certain functions of the website will not be available. Such cookies do not store any personally identifiable information.
Contact Us
How can we help you?