Partners
Log in
Compare Products
Hide
VS
This document includes the followingsections:
n NewFeatures
n Fixed Bugs
n UpgradePackages
n Upgrade/DowngradeTips
Table 1 lists the basic information of thecurrent release.
Table 1 Basic Information of the CurrentRelease
| RGOS11.1(5)B83P3 | |
| Applicable Product | AP130(L) v1.0x, AP130(W) v2.0x, AP130-W v1.1x, AP120-S v1.0x, AP120-W v1.xx, AP110-W v1.1x |
| Category | Official release |
Use the show version command todisplay information about the software version.
AP130(L)#shver detail
System description : Ruijie Indoor AP130(L) (802.11b/g/n or 802.11a/n/ac) By Ruijie Networks.
System uptime : 0:00:11:04
System hardware version : 1.00
System software version : AP_RGOS 11.1(5)B6, Release(02212520)
System patch number : NA
System software number :M20015609252015
System serial number : 1234942570008
System boot version : 2.0.11.10b7bb7(150724)
System core version : 2.6.32.8e97a157253de6
Release Number Description
Software number M20015609252015 indicates20:01:56 on September 25, 2015.
B83P3%20V1.3.files/image002.jpg){kind=small}
1) Release number is formatted as AABBCCDD. 2) AA indicates year. 01stands for 2014, 02 for 2015 and so on. 3) BB indicates month. 13 stands forJanuary, 14 for February and so on. 4) CC indicates date. 5) DD indicates timein 24-hour format, e.g., 16 stands for 4pm.
Take release number 02212520 for example.It indicates 8pm on September 25, 2015.
Table 2 shows the hardware supported bythe RGOS 11.1(5)B83P3.
Table 2 Supporting Hardware Models
| Hardware Model | Version | Description |
| AP110-W | 1.1x | Indoor Access Point, Single-Radio, Single-Band, 802.11b/g/n, FAT/FIT mode |
| AP120-W | 1.0x 1.1x | Indoor Access Point, Dual-Radio, Single-Band, 802.11b/g/n or 802.11a/n, FAT/FIT mode |
| AP120-S | 1.0x | Indoor Access Point, Single-Radio, Single-Band, 802.11b/g/n, FAT/FIT mode |
| AP130-W | 1.1x | Indoor Access Point, Dual-Radio, Dual-Band, 802.11b/g/n or 802.11a/n/ac, FAT/FIT mode |
| AP130(L) | 1.0x | Indoor Access Point, Dual-Radio, Dual-Band, 802.11b/g/n or 802.11a/n/ac, FAT/FIT mode, 100Mbps LAN Port |
| AP130(W) | 2.0x | Indoor Access Point, Dual-Radio, Dual-Band, 802.11b/g/n or 802.11a/n/ac, FAT/FIT mode, 1000Mbps LAN Port |
The hardware version number is rounded to thefirst decimal place. The numeral in the second decimal place does not changethe supporting release.
This section describes the new features.
Table 3 New Features
| Feature | CLI Command |
| Elog messages are sent to the AC | N/A |
| The AC learns the static IP address of the STA | N/A |
| Connect WiFi via WeChat 3.x is supported | N/A |
| Upgrade tool and RGOS firmware are provided | N/A |
This section describes the fixed bugs.
Table 4 Fixed Bugs
| No. | Bug Description | Release |
| 1 | AP520-I and AP130-W restart in an abnormal environment. | AC_ RGOS11.1(5)B8P3 |
| 2 | AP130-L does not broadcast the beacon signal after burn-in, and the idle-time stays at 285, causing 5G WiFi network failure. | AC_ RGOS11.1(5)B8 |
| 3 | AP130-L crashes. | AC_ RGOS11.1(5)B8 |
| 4 | The xiaomi laptop fails to access the 5G WiFi network. | AC_ RGOS11.1(5)B8P3 |
Table 5.1 RackPackage
| Applicable Product | File | File Size | MD5 |
| AP110-W v1.1x AP120-W v1.xx AP120-S v1.0x AP130-W v1.1x AP130(L) v1.0x AP130(W) v2.0x | RGOS11.1(5)B83P3_03241710_install.bin | 82,905,919 bytes | 21f83946ac361d3b00a91b4d2796403a |
Table 5.2 AP110-W
| Applicable Product | File | File Size | MD5 |
| AP110-W v1.1x | AP_RGOS11.1(5)B83P3_S1N1-01_03241704_install.bin | 12,524,202 bytes | da897343a65c0c0fc7de40e3de868e2c |
Table 5.3 AP120-W
| Applicable Product | File | File Size | MD5 |
| AP120-W v1.xx | AP_RGOS11.1(5)B83P3_S1N2-03_03241705_install.bin | 18,822,075 bytes | 2e9e6797983ce4c7050f5c7c33ff1bfc |
Table 5.4 AP120-S
| Applicable Product | File | File Size | MD5 |
| AP120-S v1.0x | AP_RGOS11.1(5)B83P3_S1N2-04_03241707_install.bin | 12,752,727 bytes | 06a91a950ef7665704c8ef6579fa3703 |
Table 5.5 AP130-W
| Applicable Product | File | File Size | MD5 |
| AP130-W v1.1x | AP_RGOS11.1(5)B83P3_S1C2-02_03241704_install.bin | 19,650,920 bytes | d8298d4427e2d32725afc080bec1bcbc |
Table 5.6 AP130(W)/AP130(L)
| Applicable Product | File | File Size | MD5 |
| AP130(L) v1.0x AP130(W) v2.0x | AP_RGOS11.1(5)B83P3_S1C2-04_03241703_install.bin | 19,176,940 bytes | 1b3a9400b03fbd877195a108225863a5 |
The following are some tips for upgradingthe RG-WLAN Series Access Controller RGOS 11.1(5)B83P3:
n Use the show version command to check thecurrent firmware before upgrade/downgrade. Select proper upgrade/downgrade modeaccording to the current firmware and the target firmware.
n During the upgrade and downgrade, pay attentionto the prompt messages. If failures occur, please save the log and contact usfor technical assistance.
n During the upgrade and downgrade, it isrecommended you not power off or reset the system, or plug/unplug any module.
n Usethe show version command to check the firmware after the upgrade/downgrade.
n The AP of version 11.1(5)B8P3 can be connectedto the AC of version 11.1(5)B8P3 and 11.1(5)B9.
How do you like this document ?
Thank you. We will inform you of our response as soon as possible. 
Ruijie Networks websites use cookies to deliver and improve the website experience.
See our cookie policy for further details on how we use cookies and how to change your cookie settings.
Cookie Manager
When you visit any website, the website will store or retrieve the information on your browser. This process is mostly in the form of cookies. Such information may involve your personal information, preferences or equipment, and is mainly used to enable the website to provide services in accordance with your expectations. Such information usually does not directly identify your personal information, but it can provide you with a more personalized network experience. We fully respect your privacy, so you can choose not to allow certain types of cookies. You only need to click on the names of different cookie categories to learn more and change the default settings. However, blocking certain types of cookies may affect your website experience and the services we can provide you.
Through this type of cookie, we can count website visits and traffic sources in order to evaluate and improve the performance of our website. This type of cookie can also help us understand the popularity of the page and the activity of visitors on the site. All information collected by such cookies will be aggregated to ensure the anonymity of the information. If you do not allow such cookies, we will have no way of knowing when you visited our website, and we will not be able to monitor website performance.
This type of cookie is necessary for the normal operation of the website and cannot be turned off in our system. Usually, they are only set for the actions you do, which are equivalent to service requests, such as setting your privacy preferences, logging in, or filling out forms. You can set your browser to block or remind you of such cookies, but certain functions of the website will not be available. Such cookies do not store any personally identifiable information.
Contact Us
How can we help you?
Global / EN
B83P3%20V1.3.files/image010.jpg)
B83P3%20V1.3.files/image011.gif){kind=small}
