Home> Products> Беспроводные сети > Серия точек доступа для установки внутри помещений>

RG-AP700 Wireless Access Point Series

Equipped with Ruijie’s highly acclaimed patented X-Sense Smart Antenna technology, the Ruijie RG-AP700 Wireless AP Series tops the class by supporting the latest 802.11ac Wave 2 standard and MU-MIMO. The RG-AP700 Series greatly improves the AP coverage performance and ensures an optimal access experience for smart mobile devices. The AP also features security, radio frequency (RF) control, mobile access, Quality of Service (QoS) and seamless roaming. Teaming up with Ruijie RG-WS Wireless Controller Series, wireless data forwarding, security and access control can be accomplished with ease.

RG-AP700 Series can be centrally managed by either RG-WS series Wireless Controller (appliance-basis) or Ruijie MACC (Managed @ Cloud Center) cloud management platform, which greatly boosts the AP management efficiency with streamlined planning, monitoring, configuration, control and maintenance.

Supporting concurrent 802.11ac Wave 2 and 802.11n, the wall and ceiling mountable RG-AP700 Series allows easy and safe installation on walls or ceilings, and offers local power and Power over Ethernet (PoE) options. This series is an ideal match for environments such as large-sized campuses, offices, hospitals, and hotspots of service providers.

Feature Highlights:

Best-performing and Cost-effective 802.11ac Wave 2 MU-MIMO

●Built-in MU-MIMO Smart Antenna to realize ubiquitous AP coverage

●The RG-AP740-I flagship AP offers tri-radio dual-band 4x4 MIMO with performance of up to 2.966Gbps

Smart Antenna Optimized for High-density Scenario

●Increased device density of up to 500+ concurrent users

●Unprecedented X-speed technology to effectively reduce Wi-Fi interference

Cloud Management Ready

●Decreased network complexity with the unified cloud management of the RG-MACC-BASE   

●Intelligent and streamlined AP planning and management to boost network efficiency with RG-MACC-SSP  

Advanced Marketing WiFi Features

●RG-AP700 series integrated Bluetooth iBeacon and wireless positioning technology

Customizable social media logins with captive portals and custom ads/campaign management enabled by the RG-MACC-SAM

RG-AP740-I 802.11ac Wave 2 AP with X-sense Antenna
The RG-AP740-I AP fully supports the latest 802.11ac Wave 2. It employs the 4th Ruijie X-sense antenna, provides three radios, supports four spatial streams, and supports innovative technologies such as MU-MIMO and HT160, which dramatically improves the signal coverage of RG-AP740-I and ensures an optimal access effect for a large number of mobile smart STAs at any time.
X-Sense 4 Antenna
MU-MIMO for higher efficiency and signal coverage everywhere
Wave 1 Mode
X-sense 3 algorithm
Single beam switching, with the beam changing based on the STA location. Optimal signal quality for any STA at any location, with full signal coverage for 5 GHz STAs even 40 meters away
Wave 2 Mode
X-sense 4 algorithm and MU-MIMO multi-group feature
Multi-beam switching for improved antenna isolation in different directions and accelerated MU-MIMO grouping speed of Wave 2 STAs, with more stable negotiation speed and higher signal transmission efficiency
Tri-Radio and Flexible Switching Between 2.4 GHz and 5 GHz
User experience improved by 50% in all scenarios
Three radios with differentiated services are provided. When there are more 2.4 GHz STAs than 5 GHz STAs, the dual 2.4 GHz band solution is adopted to reduce the 2.4 GHz radio load and improve the network access speed of STAs. When there are more 5 GHz STAs than 2.4 GHz STAs, differentiated services are provided for Wave 1 and Wave 2 STAs in 5 GHz. Wave 1 STAs will not interfere with the MU-MIMO algorithm of Wave 2 STAs. In addition, the number of STAs carried by each radio card can be reduced to increase the average network access speed. Through this design, user experience of all STAs can be improved by more than 50% in all scenarios.
Multi-Reliability Design
Innovative Self-lock Bracket

Brand new self-lock bracket design

Convenient anti-theft facility without the conventional hole lock or padlock

Flagship AP with the Most Comprehensive Functions



802.11ac Wave 2 Ready

The MU-MIMO feature, short for Multi-User Multiple-Input Multiple-Output, refers to one of the milestone technologies of 802.11ac Wave 2 enabling information transfer to multiple terminals at the same time. Powered up by the industry-leading MU-MIMO technology, the RG-AP700 Series supports the simultaneous transmission of multiple terminals under multi-user scenarios, significantly improving the wireless data concurrency and multi-user access experience. 

The Industry's Thinnest Smart AP

The exquisite enclosure of RG-AP720-I is merely 20mm thick, integrating light, compact and aesthetic features into one piece. The impressive design can fit into various scenarios, no matter an immaculate office or a high-end hotel conference room. 

Carrier-class Design

The IP41-rated RG-AP700 Series deploys a totally enclosed design for absolute dustproof performance. The case prevents erosion by dripping or condensation to maximize the AP life cycle. In addition, the dual Ethernet ports design not only solves the problem of interface data backup, but also provides flexible networking modes for the network which requires intranet and Internet isolation. Both Ethernet ports support PoE for power backup and load power feature. PoE switch (non-PoE+) can be deployed for dual power supply to save network investment cost. AP740-I equipped with an aviation aluminum bottom case with a zero-cooling-hole design, the aluminum case achieves high-efficiency cooling with strong adaptability at the same time.




Carrier-class Design(RG-AP740-I

Smart Antenna

Automated Selection of Optimum Signal Paths

Gearing up with the patented Smart Antenna matrix architecture, the RG-AP700 Series supports multiple antenna combinations and effectively solves the weakness of coverage dead zones of traditional antennas. Regardless of the location of smart device, the RG-AP700 Series customizes and aligns the best signal path to achieve full coverage. 

Enhanced Signal Strength with the Same Power

The RG-AP700 Series accurately calculates the location of smart devices and improves the signal strength accordingly with dynamic combinations of antennas, ensuring the best signal coverage. Increased signal strength might come with higher radiation level but the Smart Antenna is an exception. The transmit power of APs completely complies with the safety standards. Ruijie Networks is focused on how to boost the best signal on your smart devices. 

Reduced Interference & Simplified Deployment

Interference is the biggest challenge to any wireless network deployment. The interference problem becomes obvious when a large number of APs are deployed in a small space. The RG-AP700 Series automatically adjusts the wireless signal output direction according to the user location. When subject to interference, the Smart Antenna and X-Sense Smart Antenna technology can effectively reduce interference by more than 30%. 


Tolly Certification Report


X-Sense 4 Smart Antenna

High-speed & Energy-saving Design

●Energy-saving Design

The RG-AP700 Series adopts advanced energy-saving features including single-antenna standby, dynamic MIMO energy saving technology, enhanced transmission technology with automatic power saving and per-packet power control. Coupled with the high-performance power supply design, the RG-AP700 Series guarantees high-speed wireless access and saves energy consumption by 25%.

●Industry-leading Local Forwarding Technology

Employing an industry-leading local forwarding technology, the RG-AP700 Series eliminates the traffic bottleneck of wireless controllers. In collaboration with the RG-WS Wireless Controller Series, users can flexibly pre-configure a data forwarding mode for the APs. The APs can determine whether to forward data to the wireless controller according to a SSID or user VLAN, or directly send the data to a wired network for data exchange. 

The local forwarding technology can forward delay-sensitive and real-time data transmission through the wired network. The feature significantly alleviates the traffic pressure on the wireless controllers and better fulfills the high traffic transmission requirements of 802.11n network.

●Abundant QoS Policies

The RG-AP700 Series supports an extensive array of QoS policies. For example, it provides bandwidth limitations in WLAN/AP/STA modes and Wi-Fi multimedia (WMM) that defines different priorities for different service data. The RG-AP720-I realizes timely and quantitative transmission of audio and video, and guarantees smooth operation of multi-media applications. 

With the multicast-to-unicast conversion technology, the RG-AP700 Series resolves the video interruption problem due to packet loss or long delay in the wireless Video on Demand (VoD) system. The RG-AP700 Series highly enhances user experience with multicast video over wireless networks.

Intelligent Wireless Experience

●X-Speed Wireless Experience

Under the interference of multiple APs, the RG-AP700 Series effectively shortens the waiting time of wireless packet transmission, allowing users of Ruijie wireless network to enjoy high-speed wireless experience in environments with severe interference. 

The RG-AP700 Series solves the problems such as high latency and low network speed due to the use of old wireless LAN cards or end devices which are far away from the APs. The RG-AP700 Series assigns the same usage duration of wireless links for end devices of various types, improving the AP concurrency and ensuring a fair high-speed wireless network for all users with any devices.


X-speed Technology Gives Wireless Performance a Strong Boost

●Remote Intelligent Perception Technology (RIPT)

In the traditional network architecture where FIT APs are centrally managed by a wireless controller, packets received by the APs must be transmitted to the controller before being forwarded. When the wireless controller becomes faulty, the APs will fail to work properly causing whole network breakdown. Ruijie’s latest RIPT provides you a complete disaster recovery solution and enables the APs to implement intelligent link perception. Once the faulty controller is detected, the APs will quickly switch to the intelligent mode to continue data forwarding, ensuring the high availability of the wireless network and keeping wireless users always online.




Remote Intelligent Perception Technology (RIPT) - Disaster Recovery

●Intelligent Load Balancing




Intelligent User Load Balancing

On a high-density wireless LAN, the RG-AP700 Series collaborates with the Wireless Controller Series to intelligently distribute users among different APs according to the number of users and data traffic in real time. This feature balances the load pressure on each AP and improves the average bandwidth and Quality of Service (QoS), offering higher network availability.

●Seamless Roaming Experience

Teaming up with the RG-WS Wireless Controllers or MACC Cloud Management Platform, the RG-AP700 Series allows wireless users to roam seamlessly on Layer 2 and Layer 3 networks without data interruption.

Comprehensive Security Protection

●Secure User Access

The RG-AP700 Series supports a wide range of authentication methods such as web, 802.1x, MAC address and local authentication. The standard network access control system has a set of control policies in terms of user access, authorization, host compliance check, network behavior monitoring, network attack defense, etc. All these control features ensure that users are authenticated before accessing the network services securely.

●Virtual AP Technology

With the virtual AP technology, the RG-AP700 Series supports up to 48 virtual APs. Network administrator can separately encrypt and isolate subnets or VLANs that have the same SSID. The deployment thereby enables specified authentication mode and encryption mechanism for each SSID.

●Comprehensive Wireless Protection

In conjunction with RG-MACC-SAM and RG-WS Wireless Controllers, the RG-AP700 Series offers a breadth of security features including WIDS (Wireless Intrusion Detection System), RF interference tracking, rogue AP containment, anti-ARP snooping, DHCP protection and beyond for all-around security protection.  

●Robust Authentication Options

As the key components of the Ruijie’s intelligent cloud-based RG-MACC platform, the RG-AP700 Series offers the secure and optimal network connections that are required in multiple scenarios. The RG-AP700 Series supports convenient and high-efficiency Protected Extensible Authentication Protocol (PEAP), Web Portal Authentication, SMS Authentication, and Voucher (QR Code) Authentication . 

Voucher (QR code) Login authentication is another wireless security and accounting highlight, enabled by Ruijie’s RG-MACC-SAM platform. It would generate one-time or pay-per-use vouchers in recurring or one-time format on time-based policies, streamlining and simplifying the generation and management of QR code or Vouchers.  


  Advanced Guest Interfaces of the QR Code Authentication

Flexible Switching between FAT & FIT Modes

The RG-AP700 Series supports flexible switching over the FAT and FIT modes according to the networking requirements of different industries. The FIT mode can achieve the installation with zero configuration, and a thorough remote management significantly improves the maintenance and management efficiency of wireless network. 

Cloud Management Ready

The RG-AP700 Series can be managed in a cloud-enabled and unified approach that features the real-time and intuitive monitoring, planning, configuration and maintenance over the Ruijie RG-MACC-BASE platform. In conjunction with RG-MACC-BASE, the RG-AP700 Series can be flexibly deployed, efficiently managed and easily upgraded, freeing up significant level of IT manpower with increased manageability. 

Along with the deployment of RG-MACC-SAM and RG-MACC-LBS, the RG-AP700 Series also supports integrated marketing features and location-based analytics to reach new customers and keep the existing ones.  Therefore, the RG-AP700 Series in conjunction with the RG-MACC platform will upgrade the AP deployment and Wi-Fi access as a powerful tool of monetization with a tremendous breadth of security protections.






Target Deployments

For campuses, offices, hospitals, and hotspots of service providers

Basic Specifications


Concurrent tri-radio dual-band

Concurrent dual-radio dual-band

Concurrent dual-radio dual-band




Operating Bands

802.11b/g/n: 2.4GHz to 2.483GHz

802.11a/n/ac: 5.150GHz to 5.350GHz, 5.47GHz to 5.725GHz, 5.725GHz to 5.850GHz (vary depending on countries)


Built-in "X-Sense 4" Smart Antenna 4×4 SU-MIMO, 4×4 MU-MIMO                                      

Built-in Smart Antenna 4×4 SU-MIMO, 4×4 MU-MIMO

Built-in Smart Antenna

2×2 SU-MIMO, 2×2 MU-MIMO

Max Throughput

1733Mbps/800Mbps/433Mbps per radio

2966Mbps per AP

1733Mbps/800Mbps per radio

2533Mbps per AP



1267Mbps per AP

 Spatial Streams





OFDM: BPSK@6/9Mbps









PSK, QPSK, 16QAM, 64QAM and 256QAM

OFDM: BPSK@6/9Mbps









BPSK, QPSK, 16QAM, 64QAM and 256QAM

OFDM: BPSK@6/9Mbps









BPSK, QPSK, 16QAM, 64QAM and 256QAM

Receiver Sensitivity




11ac HT20:-83dBm(MCS0), -57dBm(MCS9)

11ac HT40:-79dBm(MCS0), -57dBm(MCS9)

11ac HT80:-76dBm(MCS0), -51dBm(MCS9)

Maximum Transmit Power


Adjustable Power


IP Rating



Service Port

2 10/100/1000BASE-T Ethernet uplink ports (Both ports support PoE) 1 USB port

2 10/100/1000BASE-T Ethernet uplink ports (Both ports support PoE) 1 USB port

2 10/100/1000BASE-T Ethernet uplink ports (LAN1 port supports PoE) 1 USB port

Management Port

1 console port


Power Supply

Local power supply (DC 48V) and PoE+ (802.3af/802.3at)

Support dual PoE for power backup

(Power adapters sold separately)

Local power supply (DC 48V) and

PoE+ (802.3af/802.3at)

Support dual 802.at power supply, or dual 802.af power supply

Local power supply (DC 48V) and PoE (802.3af/at)

(Power adapters sold separately)

Power Consumption





Maximum clients per AP

Up to 612

Up to 512

Up to 256

BSSID capacity

Up to 16 per radio                                                          Up to 48 per AP

Up to 16 per radio                                                          Up to 32 per AP

Up to 16 per radio                                                          Up to 32 per AP

SSID hiding


Configuring the authentication mode. Encryption mechanism and VLAN attributes for each SSID


Remote Intelligent Perception Technology (RIPT)




Intelligent  load balancing based on the number of users or traffic


STA control


Bandwidth control

STA/SSID/AP-based speed control

Preference for 5GHz (band select)


Wireless position tracking


Dynamic Frequency Selection(DFS)

Future Release Support


PSK, Web, and 802.1x authentication


Data encryption

WPA (TKIP), WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits)

QR code authentication


SMS authentication


PEAP authentication


Data frame filtering

Whitelist, static/dynamic blacklist

User isolation


Rogue AP detection and countermeasure


Dynamic ACL assignment




CPU Protection Policy (CPP)


Network Foundation Protection Policy (NFPP)


Wireless Intrusion Detection System(WIDS)


Wireless Intrusion Prevention System (WIPS)







WeChat shake



IPv4 address

Static IP address or DHCP reservation

IPv6 CAPWAP tunnel




IPv6 address

Manual or automatic configuration


Multicast to unicast conversion

Management and Maintenance

Network management

SNMP v1/v2C/v3, Telnet, TFTP, Web management

Visualized wireless heat map analysis


(need to integrate with SNC)

Real-time spectrum analysis


(need to integrate with SNC)

Fault detection and alarm


Cloud AC management


Statistics and logs


FAT/FIT switching

The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC.

The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet.

External Characteristics



LED Indicators

1 LED (red, green, blue, orange, and flashing modes, breathing flashing mode for smart device access, and the indicator can be switched off to silent mode)

Relevant Standard

Wi-Fi Alliance Certification


Safety Standard

GB4943, EN/IEC 60950-1

EMC Standard

GB9254, EN301 489

Health Standard

EN 62311

Radio Standard

EN300 328, EN301 893

Vibration Standard

IEC60068 2-31, ETSI EN300 019,




Dimensions (W x D x H) (mm)

230 × 230 × 42
(Height of AP only, excluding case and mount kit)

230 × 230 × 42
(Height of AP only, excluding case and mount kit)

180 × 180 × 20

(Height of AP only, excluding case and mount kit)





Work Environment


Operating Temperature: -10°C to 50°C

Storage Temperature: -40°C to 70°C


Operating Humidity: 5% to 95% (non-condensing)

Storage Humidity: 5% to 95% (non-condensing)

Installation Mode




Application Scenario 1

As a key component of the cloud-managed RG-MACC solution, the high-performance RG-AP700 Series is targeted at high-capacity scenario, such as shopping malls and Smart City projects, featuring BT integration for IoT readiness. Compatible with the RG-MACC platform, the RG-AP700 Series is able to scale its deployment according to the evolving requirements of enterprise-grade networks as shown in the following solution diagram.




RG-MACC Solution Architecture



Application Scenario 2

RG-AP700 Series in combination with various RG-WS Series Wireless Controller is the ideal match for spacious and simple-structured buildings with high end user density, such as meeting rooms, libraries, classrooms, bars, and recreation centers. Clients can deploy the devices flexibly according to their needs.


RG-AP700 Series Typology Diagram





Indoor Wireless Access Point, built-in “X-Sense 4” Smart Antenna, tri-radio dual-band, 4 spatial streams, access rate up to 2.966Gbps per AP

Support concurrent 802.11ac Wave 2 and 802.11a/b/g/n, FAT/FIT modes, 2 10/100/1000BASE-T uplink ports, support PoE+ and local power supply, integrated with BLE/Bluetooth iBeacon

(PoE+ and local power adapters sold separately)


Indoor Wireless Access Point, built-in Smart Antenna, dual-radio dual-band, 4 spatial streams, access rate up to 2.533Gbps per AP

Support concurrent 802.11ac Wave 2 and 802.11a/b/g/n, FAT/FIT modes, 2 10/100/1000BASE-T uplink ports, support PoE+ and local power supply, integrated with BLE/Bluetooth iBeacon

(PoE+ and local power adapters sold separately)


Indoor Wireless Access Point, built-in Smart Antenna, dual-radio dual-band, 2 spatial streams, access rate up to 1.267Gbps per AP

Support concurrent 802.11ac Wave 2 and 802.11a/b/g/n, FAT/FIT modes, 2 10/100/1000BASE-T uplink ports, support PoE+ and local power supply, integrated with BLE/Bluetooth iBeacon

(PoE and local power adapters sold separately)



Case Study

More >