Compare Products

Hide

Clear All

VS

Software

Ruijie RG-RAP1200P Series Access Point Firmware
Type
Version No.
ReyeeOS300
Release Time
2024-08-18
File Size
7.2MB
Revision History
Release Note

1.1New Features

1.1.1  Configuring Layer 2 Isolation

  • Specification

SSID-based Client Isolation is only supported on the RG-RAP2200(E) (hardware version V2.00 or later, as indicated on the device label), RG-RAP2200(E)-V2, RG-RAP6202(G), RG-RAP52-OD, RG-RAP6262(G), RG-RAP2260(G), and RG-RAP73HD.

  • Go to the page for configuration.
  • Method 1: Choose Network-Wide > Workspace > Wireless > Wi-Fi > Wi-Fi List. Select the Wi-Fi network, and click Edit.
  • Method 2: Choose One-Device > Config > WLAN > Wi-Fi > Wi-Fi List. Select the Wi-Fi network, and click Edit.
    • Click to expand advanced settings, turn on Client Isolation in the expanded settings and click OK. When enabled, clients connected to this SSID are isolated from each other, and cannot access other clients connected to this SSID on all APs on Layer 2, thereby improving security.

 

1.1.2  Configuring Auto WAN Port

  • Specification

This function is only supported on the RG-RAP73HD.

Go to the configuration page: Choose One-Device > Config > Network > Auto WAN Port.

Ethernet cables are susceptible to attenuation and interference over long distances (hundreds of meters to kilometers). Therefore, optical cables are recommended to ensure high-quality long-distance transmission. With the Auto WAN Port feature enabled, the optical port on the AP will function as the WAN port to connect to the switch or gateway, enhancing the quality of long-distance data transmission.

 

  • Caution
  • The Auto WAN Port feature only supports the optical port and the default WAN port as WAN port.
  • The Auto WAN Port function will not take effect when link aggregation is enabled.
  • Upgrading an existing device while saving the configuration: When upgrading from a version that does not support Auto WAN to a version that does support it, the Auto WAN feature will be disabled by default.
  • Upgrading an existing device without saving the configuration: When upgrading from a version that does not support Auto WAN to a version that does support it, the Auto WAN feature will be enabled by default.
  • For new devices: The Auto WAN Port feature is enabled by default.
  • In Wireless Repeater mode, the Auto WAN Port feature does not take effect.
  • When a non-default WAN port is used as an uplink port: If you upgrade/downgrade to a software version that does not support the Auto WAN Port feature while saving the configuration, you will receive a warning that the upgrade/downgrade is not allowed. Existing configurations cannot be imported to a device that does not support the Auto WAN Port feature. Forcing such an import may result in network unavailability.

 

After Auto WAN is disabled, you can specify a port as the fixed WAN port.

 

1.2   Changed Features

Features

Description

N/A

N/A

 

2 Resolved Issues

Bug ID

Description

1197718

Resolved the issue where enabling DNS domain proxy on a wireless AP caused the device to restart due to illegal DNS packets.

1193380

Resolved the performance degradation issue in certain scenarios following channel width configuration.

1176417

Resolved the issue on Wi-Fi 5 APs where wireless rate limiting configuration did not take effect after AP portal authentication was enabled.

1163799

Resolved the issue in AX1800 APs where some PDAs were unable to obtain an IP address.

1162244

Added a 256QAM toggle switch for the 2.4 GHz frequency band in RF settings to resolve the issue where some PDAs couldn't detect SSID signals.

1206097

Resolved the issue of smart domain proxy that could lead to device crashes in certain scenarios.

3 Open Issues

Bug ID

Description

Avoidance Measures

N/A

N/A

N/A

Ruijie Networks websites use cookies to deliver and improve the website experience.

See our cookie policy for further details on how we use cookies and how to change your cookie settings.

Cookie Manager

When you visit any website, the website will store or retrieve the information on your browser. This process is mostly in the form of cookies. Such information may involve your personal information, preferences or equipment, and is mainly used to enable the website to provide services in accordance with your expectations. Such information usually does not directly identify your personal information, but it can provide you with a more personalized network experience. We fully respect your privacy, so you can choose not to allow certain types of cookies. You only need to click on the names of different cookie categories to learn more and change the default settings. However, blocking certain types of cookies may affect your website experience and the services we can provide you.

  • Performance cookies

    Through this type of cookie, we can count website visits and traffic sources in order to evaluate and improve the performance of our website. This type of cookie can also help us understand the popularity of the page and the activity of visitors on the site. All information collected by such cookies will be aggregated to ensure the anonymity of the information. If you do not allow such cookies, we will have no way of knowing when you visited our website, and we will not be able to monitor website performance.

  • Essential cookies

    This type of cookie is necessary for the normal operation of the website and cannot be turned off in our system. Usually, they are only set for the actions you do, which are equivalent to service requests, such as setting your privacy preferences, logging in, or filling out forms. You can set your browser to block or remind you of such cookies, but certain functions of the website will not be available. Such cookies do not store any personally identifiable information.

Accept All

View Cookie Policy Details

Contact Us

Contact Us

How can we help you?

Contact Us

Get an Order help

Contact Us

Get a tech support