Compare Products

Hide

Clear All

VS

Picture

RG-AM5528-SF, Optical i-Share+ Master Access Point

Recommended for deployment in schools, hotels, medical care, office, production workshops, etc.

Models
Series
Highlight Features
  • Connection with APs through hybrid cables, realize long distance and fast transmission
  • Full 2.5G downlink optical ports, fully maximizing the AP performance
  • Multiple AP models allowing flexible service expansion
  • AP remote power-on or power-off, eliminating the need for onsite operation
Sales Enquiry
Key Specification View More
Features
 

Ruijie All-Optical i-Share+ Solution — Master AP RG-AM5528-SF

All-optical architecture, point-to-point power supply for APs through hybrid cables
High-bandwidth data transmission and long-distance power supply, supporting the long-term evolution of wireless network construction in the next two decades

Specifications

Solution

 

All-Optical Network

Hybrid Cable

Wi-Fi 6

i-Share Mode

Power On/Off of a Single AP

24 Optical Ports and 24 PoE Ports, Hybrid Cable, Maximum Transmission Distance of 1000 m

24 optical ports and 24 power supply ports, and direct connection with optical APs through innovative hybrid cables
Only one cable for high-bandwidth data transmission and long-distance PoE power supply concurrently, simplifying the deployment of an all-optical network

 

Longer Distance
The connection distance between the master and micro APs is up to 1,100 m, realizing central management.

Faster Transmission
The transmission rate of the hybrid cable is up to 400 Gbps to meet the expansion requirements in the next two decades.

Superior Power Supply
The master AP can power 24 micro APs with one cable, eliminating the need for local power supply.

2.5G Optical Ports, Eliminating the Bottleneck of Gigabit Networks and Maximizing AP Performance

Full 2.5G downlink optical ports, allowing high-speed transmission of APs
Breaking the bottleneck of wired networks and providing better wireless experience for growing service needs

 

Multiple AP Models, Facilitating Flexible Service Expansion

The optical i-Share master AP provides the i-Share mode, supports access of micro APs, and integrates wired and wireless coverage of intensive rooms such as dormitories and hotels.
It can also switch to the common mode, provide Layer 2 switching, realize on-demand access of the ordinary wall plate APs, indoor APs, and outdoor APs, facilitating flexible service expansion.

 
An O/E converter is required for connecting an conventional AP with copper ports to a master AP.

P2P Power Supply Control and Remote Power-on/Power-off,
Eliminating the Need for Onsite Operation

The 24 power supply ports correspond to the downlink power ports one by one, and support visualization of power supply per circuit on the INC.
When an AP fails, each AP can be powered on or off remotely, without performing any onsite operation.

 
 
 
 
 

Specifications

Hardware Specifications

Dimensions and Weight

RG-AM5528-SF

Dimensions

(W x D x H)

Main unit: 442 mm x 315 mm x 43.6 mm (17.40 in. x 12.40 in. x 1.72 in.)

Shipping: 538 mm x 438 mm x 173 mm (21.18 in. x 17.24 in. x 6.81 in.)

Rack height

1 RU

Weight

Main unit: 4.6 kg (10.14 lbs)

Shipping: 6.38 kg (14.06 lbs)

Mounting

Rack-mount



System Specifications

RG-AM5528-SF

Memory

1 GB DDR4

Flash memory

4 GB

Switching capacity

880 Gbps/7.92 Tbps

Packet forwarding rate

426 Mpps/600 Mpps



Port Specifications

RG-AM5528-SF

Fixed service port

Uplink: 4 x 10GE SFP+ ports that can only switch between 10GE SFP+ mode and 1GE SFP mode simultaneously. Separate mode switching is not supported.

Downlink: 24 x 1GE/2.5GE SFP ports and 24 x PoE-out ports. Ports 1 to 20 support PoE/PoE+, and each port supports up to a 30 W PoE power supply. Ports 21 to 24 support PoE/PoE+/PoE++, and each port supports up to 90 W PoE power supply.

The maximum PoE output power is 480 W.

Fixed management port

1 x RJ45 console port

1 x 10/100/1000BASE-T MGMT port

Status LED

24 x PoE LEDs

24 x 1000/2.5GBASE-X SFP port LEDs

4 x SFP+ port LEDs

1 x system status LED

1 x power LED

1 x MGMT port LED

 

Power Supply and Consumption

RG-AM5528-SF

Input power supply 

One 550 W built-in power module (AC input and DC output)

● Input voltage: 176 V AC to 240 V AC

Frequency: 50 Hz to 60 Hz

Rated input current: 4 A

● Output voltage: 12 V DC for the master AP and 54 V DC for the external unit

Maximum power consumption

Maximum power consumption: 530 W

Without load: < 42 W

With full load: < 530 W

 

Environment and Reliability

RG-AM5528-SF

Temperature

Operating temperature: 0ºC to 45ºC (32°F to 113°F)

Storage temperature: –40°C to +70°C (–40°F to +158°F)

Note: At an altitude in the range of 1,800–5,000 m (5,905.51–16,404.20 ft.), every time the altitude increases by 220 m (721.78 ft.), the maximum temperature decreases by 1°C (1.8°F).

Altitude

Operating altitude: –500 m to +5,000 m (–1,640.42 ft. to +16,404.20 ft.)

Storage altitude: –500 m to +5,000 m (–1,640.42 ft. to +16,404.20 ft.)

Humidity

Operating humidity: 10% RH to 90% RH (non-condensing)

Storage humidity: 5% RH to 95% RH (non-condensing)

Surge protection

AC power connector

● Differential mode: ± 6 kV

● Common mode: ± 6 kV

Hybrid cable connector

● Differential mode: ± 2 kV

● Common mode: ± 6 kV

Fan

Fan speed adjustment

Fan fault alarm

Shock and vibration

GB/T 2423

Environmental standard

Storage and operating environment: NEBS GR-63-CORE_Issue3_2006 GB/T 2423.6-1995

Mean Time Between Failure (MTBF)

69.23 years at the operating temperature of 25°C (77°F)

 

Software Specifications

RG-AM5528-SF

Basic Function

Applicable software version

RGOS12.5(4)B0404P1 or later

Security and Authentication

ACL

IPv6 ACL

Time range-based ACL

Egress ACL based on a Layer 2 physical interface or aggregate interface

Ingress ACL based on a Layer 2 physical interface or aggregate interface

Egress ACL based on a Layer 3 interface

Ingress ACL based on a Layer 3 interface

CPP

CPU Protect Policy (CPP)

NFPP

Network Foundation Protection Policy (NFPP)

Routing and Switching

MAC

MAC address learning and aging

Static and dynamic MAC addresses

Source MAC address filtering

Limitation on the number of MAC addresses learned on an interface

Ethernet

Jumbo frame length: 1,518 bytes

IEEE802.1p and IEEE802.1Q

Optical module information display, alarms about faults, and diagnosis parameter measurement (QSFP+/SFP+/SFP)

VLAN

Interface-based VLAN assignment

Maximum number of SVIs: 1,000

Maximum number of VLANs: 4,094

VLAN ID range: 1 to 4,094

ARP

ARP entry aging, gratuitous ARP learning, and proxy ARP

Maximum number of ARP entries: 24,000

ARP check

IPv4 services

Static and dynamic IPv4 addresses

DHCP server and DHCP client

DHCP snooping

DNS client and DNS proxy

NTP server, NTP client, and SNTP client

IPv6 services

Static and dynamic IPv6 addresses.

Neighbor Discovery (ND), IPv6 ND proxy, ICMPv6, and IPv6 ping

DNSv6 client

NTPv6 server and NTPv6 client

IP routing

IPv4/IPv6 static routing

Maximum number of static IPv4 routes: 1,000

Maximum number of static IPv6 routes: 1,000

Static black hole routing

Multicast

Multicast-to-unicast conversion

IGMP snooping

Network Management and Monitoring

Network management

SNMPv1/v2c/v3

Fault detection and alarm

Network management platform

Web management (Eweb)

User access management

Console, Telnet, SSH, TFTP client, TFTP server, FTP server ,and FTP client

 

Regulatory Compliance

RG-AM5528-SF

Regulatory compliance

EN 55032, EN 55035, EN 61000-3-3, EN IEC 61000-3-2, ETSI EN 300 386, IEC 62368-1, and EN 62368-1

* For more country-specific regulatory information and approvals, contact your local sales agency.

Show More
Resources All Resources
Order Information

Model

Description

RG-AM5528-SF

All-optical i-Share+ master AP for Ruijie SOE Solution

24 x downlink 1G/2.5G SFP ports and 24 x PoE/PoE+ power supply ports. Four power supply ports support PoE/PoE/PoE++ power supply.

4 x uplink 10G SFP+ ports, low noise, and power supply included

In i-Share mode, each master AP occupies eight wireless controller licenses.

RG-MAP852-SF-S

Universal IEEE 802.11ax-compliant dual-radio wall plate micro AP for Ruijie SOE Solution

1 x SFP port

1 x 10/100/1000Base-T Ethernet port with auto-negotiation

2.4 GHz and 5 GHz frequency bands

A wireless data rate of up to 1.775 Gbps per device

BOB structure

One 1G optical module of the master AP

RG-MAP852-SF-M

Universal IEEE 802.11ax-compliant dual-radio wall plate micro AP for Ruijie SOE Solution

1 x 2.5G SFP port

4 x10/100/1000Base-T Ethernet ports with auto-negotiation

2.4 GHz and 5 GHz frequency bands

A wireless data rate of up to 2.976 Gbps per device

Support for Bluetooth

Wall-mounted, ceiling-mounted, and junction box-mounted

One 2.5G optical module for the micro AP and one 2.5G optical module for the master AP are delivered with this AP.

RG-HybridP

The hybrid pigtails for Ruijie SOE Solution incorporates optical fibers and copper wires. One end is the LC interface and DC connector.

RG-HybridBox

The hybrid box for Ruijie SOE Solution supports input of 24 hybrid pigtails and output of 24 hybrid cables, which is used to connect the hybrid pigtails to the hybrid cables.

RG-OEHC-SM-1B6A2-2x0.5-I-305

Indoor single-core 2 × 0.5 mm² hybrid cable, single roll, with a length of 305 m

RG-OEHC-SM-1B6A2-2x1.0-I-305

Indoor single-core 2 × 1.0 mm² hybrid cable, single roll, with a length of 305 m

Show More
Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.
How would you rate your experience on this page?
Very disatisfying
Very satisfying
If you would like to offer more comment, please type in the textbox below, that would be helpful for the improvement of this page.
Submit
Thank you for your feedback!

Ruijie Networks websites use cookies to deliver and improve the website experience.

See our cookie policy for further details on how we use cookies and how to change your cookie settings.

Cookie Manager

When you visit any website, the website will store or retrieve the information on your browser. This process is mostly in the form of cookies. Such information may involve your personal information, preferences or equipment, and is mainly used to enable the website to provide services in accordance with your expectations. Such information usually does not directly identify your personal information, but it can provide you with a more personalized network experience. We fully respect your privacy, so you can choose not to allow certain types of cookies. You only need to click on the names of different cookie categories to learn more and change the default settings. However, blocking certain types of cookies may affect your website experience and the services we can provide you.

  • Performance cookies

    Through this type of cookie, we can count website visits and traffic sources in order to evaluate and improve the performance of our website. This type of cookie can also help us understand the popularity of the page and the activity of visitors on the site. All information collected by such cookies will be aggregated to ensure the anonymity of the information. If you do not allow such cookies, we will have no way of knowing when you visited our website, and we will not be able to monitor website performance.

  • Essential cookies

    This type of cookie is necessary for the normal operation of the website and cannot be turned off in our system. Usually, they are only set for the actions you do, which are equivalent to service requests, such as setting your privacy preferences, logging in, or filling out forms. You can set your browser to block or remind you of such cookies, but certain functions of the website will not be available. Such cookies do not store any personally identifiable information.

Accept All

View Cookie Policy Details

Contact Us

Contact Us

How can we help you?

Contact Us

Get an Order help

Contact Us

Get a tech support