Picture
RG-AP680-L Wi-Fi 6 Dual-Radio 2975 Mbps Outdoor AP
Outdoor scenarios in general education, SME, energy, business, government, and healthcare sectors
Models
Series
Highlight Features
- Industrial-grade product design, IP68 rating, Operating temperature: –40°C to +65°C
- High-power omnidirectional antennas with 360° coverage to every corner
- Upgraded to Wi-Fi 6, a combined data rate of up to 2975 Mbps
- Ruijie cloud management, intelligent optimization
Key Specification
Designed for Beach
Ruijie Cloud Managed Series Outdoor AP RG-AP680-L
Port
Dimensions
Max. Data Rate 2975 Mbps
4 Spatial Streams
IP68 Rating
DC/PoE Power Supply
Free Cloud Management
Industrial-Grade Product Design
Ensuring Stable Running in Harsh Environments
Corrosion Protection
IP68 Rating
6 kV Lightning Protection
Wide Temperature Range
Comply with salt spray prevention standards, ensuring stable running in saline, warm and humid environment.
Industrial-Grade Product Design
Ensuring Stable Running in Harsh Environments
Corrosion Protection
Comply with salt spray prevention standards, ensuring stable running in saline, warm and humid environment.
Industrial-Grade Product Design
Ensuring Stable Running in Harsh Environments
IP68 Rating
IP68 rating protection against dust and water, avoiding liquid and sand intrusion.
Industrial-Grade Product Design
Ensuring Stable Running in Harsh Environments
6 kV Lightning Protection
Built-in high-standard lightning protectors, defending against 6 kV surge and ensuring stable running in bad weather such as thunderstorms.
Industrial-Grade Product Design
Ensuring Stable Running in Harsh Environments
Wide Temperature Range
Operating in the range of –40°C to +65°C, adapting to clod weather in the northern regions.
Omnidirectional Antennas with 360° Coverage to Every Corner
Equipped with 28 dBm omnidirectional antennas with high transmit power
Extending coverage to every corner within 360° and up to 100 m in radius
Good signal coverage for STAs around the AP (including the rear side)
Applicable to outdoor environments where STAs are dispersed
*The maximum range of Wi-Fi coverage is calculated based on field tests. The real transmission range may vary, according to the environment, receiving device, etc.
Wi-Fi 6 AX3000
Achieving a combined data rate of up to 2975 Mbps
Cloud, Make Your Business Easy
- Remote monitoring
- Remote Wi-Fi management
- Cloud portal authentication
- Wireless intelligent optimization
FAQ
Tips: Product information and performance will be affected by upgrade iteration, specific
environment and
other factors, so FAQ content is for reference only. For further information, please contact
online support.
Documents
RG-AP680(CD) &RG-SAP685-SP 系列EU-DOC
RG-AP680-L Wi-Fi 6 Dual-Radio Omnidirectional Outdoor Access Point Datasheet
Ruijie RG-WLAN Implementation Cookbook (V4.1)
Ruijie RG-AP680-L Access Point Hardware Installation and Reference Guide (V1.1)
Ruijie RG-WLAN Series Access Points Web-based Configuration Guide, RGOS11.9(6)W3B3 (V1.1)
Ruijie RG-WLAN Series Access Points Release Notes, RGOS11.9(6)W3B3 (V1.3)
Ruijie RG-WLAN Series Access Points Command Reference, RGOS11.9(6)W3B3 (V1.0)
Ruijie RG-WLAN Series Access Points Configuration Guide, RGOS11.9(6)W3B3 (V1.0)
Ruijie RG-AP680-L Wireless Access Point Firmware
Ruijie RG-WLAN Series Access Points and Access Controllers Upgrade Guide (V1.0)
Specifications
| Dimensions and Weight |
RG-AP680-L |
| Unit dimensions (W x D x H) |
251 mm x 168 mm x 64 mm (9.88 in. x 6.61 in. x 2.52 in.) |
| Shipping dimensions (W x D x H) |
405 mm x 232 mm x 325 mm (15.94 in. x 9.13 in. x 12.79 in.) |
| Unit weight |
Main unit: 1.0 kg (2.20 lbs) Mounting bracket: 0.9 kg (1.98 lbs) |
| Shipping weight |
3.15 kg (6.94 lbs) |
| Mounting |
Ceiling/Pole-mount (a mounting bracket is delivered with the main unit) |
| Wi-Fi Radio |
RG-AP680-L |
| Radio design |
Dual-radio and four spatial streams: ● Radio 1: 2.4 GHz, two spatial streams, 2x2 MU-MIMO ● Radio 2: 5 GHz, two spatial streams, 2x2 MU-MIMO |
| Operating frequencies |
Radio 1: 802.11b/g/n/ax ● 2.400 GHz to 2.483 GHz, channels 1 to 13 Radio 2: 802.11a/n/ac/ax ● 5.150 GHz to 5.250 GHz, U-NII-1, channels 36, 40, 44, and 48 ● 5.250 GHz to 5.350 GHz, U-NII-2A, channels 52, 56, 60, and 64 ● 5.470 GHz to 5.725 GHz, U-NII-2C, channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, and 140 ● 5.725 GHz to 5.850 GHz, U-NII-3/ISM, channels 149, 153, 157, 161, and 165 Note: Country-specific restrictions apply. |
| Data rates |
Combined peak data rate: 2.976 Gbps Radio 1: 2.4 GHz, 574 Mbps ● Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client devices (max.) ● Two spatial stream Single User (SU) MIMO for up to 287 Mbps wireless data rate to individual 2SS HE20 802.11ax client devices (typical) Radio 2: 5 GHz, 2.402 Gbps ● Two spatial stream Single User (SU) MIMO for up to 2.402 Gbps wireless data rate to individual 2SS HE160 802.11ax client devices (max) ● Two spatial stream Single User (SU) MIMO for up to 1.201 Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (typical) ● Two spatial stream Multi-User (MU) MIMO for up to 2.402 Gbps wireless data rate to up to two 1SS HE160 802.11ax DL-MU-MIMO capable client devices simultaneously (max) ● Two spatial stream Multi-User (MU) MIMO for up to 1.201 Gbps wireless data rate to up to two 1SS HE80 802.11ax DL-MU-MIMO capable client devices simultaneously (typical) |
| Data rate set |
The following 802.11-compliant data rates in Mbps are supported: 2.4 GHz radio ● 802.11b: 1, 2, 5.5, 11 ● 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 ● 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40) ● 802.11ac: 6.5 to 400 (MCS0 to MCS9, NSS = 1 to 2,VHT20 to VHT40) ● 802.11ax: 8.6 to 575 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40) 5 GHz radio ● 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 ● 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40) ● 802.11ac: 6.5 to 1732 (MCS0 to MCS9, NSS = 1 to 2,VHT20 to VHT160) ● 802.11ax: 8.6 to 2,402 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE160) |
| Packet aggregation |
802.11n/ac/ax : A-MPDU and A-MSDU |
| Antenna type |
Built-in omnidirectional antenna (two 2.4 GHz antennas and two 5 GHz antennas) |
| Max. antenna gain |
2.4 GHz radio: 4 dBi 5 GHz radio: 6 dBi |
| Max. transmit power |
2.4 GHz radio: 28 dBm (25 dBm per chain) 5 GHz radio: 28 dBm (25 dBm per chain) Note: The transmit power is limited by local regulatory requirements. |
| Power increment |
Configurable in increments of 1 dBm |
| Radio technologies |
802.11b: Direct-Sequence Spread-Spectrum (DSSS) 802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM) 802.11ax: Orthogonal Frequency Division Multiple Access (OFDMA) |
| Modulation types |
802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM |
The following table lists the radio frequency performance of Wi-Fi including different frequency bands, protocols, and date rates. It is country-specific, and Ruijie Networks reserves the right of interpretation.
| Wi-Fi Radio Frequency Performance |
RG-AP680-L |
||
| Frequency Band and Protocol |
Data Rate |
Max. Transmit Power per Transmit Chain |
Max. Receive Sensitivity per Receive Chain |
| 2.4 GHz 802.11b |
1 Mbps |
25 dBm |
-92 dBm |
| 2 Mbps |
25 dBm |
-82 dBm |
|
| 5.5 Mbps |
25 dBm |
-84 dBm |
|
| 11 Mbps |
25 dBm |
-78 dBm |
|
| 2.4 GHz 802.11g |
6 Mbps |
25 dBm |
-84 dBm |
| 24 Mbps |
23 dBm |
-74 dBm |
|
| 36 Mbps |
23 dBm |
-72 dBm |
|
| 54 Mbps |
20 dBm |
-67 dBm |
|
| 2.4 GHz 802.11n (HT20) |
MCS0 |
25 dBm |
-84 dBm |
| MCS7 |
20 dBm |
-66 dBm |
|
| 2.4 GHz 802.11n (HT40) |
MCS0 |
25 dBm |
-79 dBm |
| MCS7 |
20 dBm |
-63 dBm |
|
| 2.4 GHz 802.11ax (HE20) |
MCS0 |
25 dBm |
-84 dBm |
| MCS11 |
18 dBm |
-54 dBm |
|
| 2.4 GHz 802.11ax (HE40) |
MCS0 |
25 dBm |
-80 dBm |
| MCS11 |
18 dBm |
-51 dBm |
|
| 5 GHz 802.11a |
6 Mbps |
25 dBm |
-84 dBm |
| 24 Mbps |
23 dBm |
-74 dBm |
|
| 36 Mbps |
23 dBm |
-72 dBm |
|
| 54 Mbps |
20 dBm |
-67 dBm |
|
| 5 GHz 802.11n (HT20) |
MCS0 |
25 dBm |
-84 dBm |
| MCS7 |
20 dBm |
-66 dBm |
|
| 5 GHz 802.11n (HT40) |
MCS0 |
25 dBm |
-81 dBm |
| MCS7 |
20 dBm |
-63 dBm |
|
| 5 GHz 802.11ac (VHT20) |
MCS0 |
25 dBm |
-84 dBm |
| MCS9 |
19 dBm |
-61 dBm |
|
| 5 GHz 802.11ac (VHT40) |
MCS0 |
25 dBm |
-81 dBm |
| MCS9 |
19 dBm |
-56 dBm |
|
| 5 GHz 802.11ac (VHT80) |
MCS0 |
25 dBm |
-78 dBm |
| MCS9 |
19 dBm |
-53 dBm |
|
| 5 GHz 802.11ax (HE20) |
MCS0 |
25 dBm |
-84 dBm |
| MCS11 |
18 dBm |
-54 dBm |
|
| 5 GHz 802.11ax (HE40) |
MCS0 |
25 dBm |
-81 dBm |
| MCS11 |
18 dBm |
-51 dBm |
|
| 5 GHz 802.11ax (HE80) |
MCS0 |
25 dBm |
-78 dBm |
| MCS11 |
18 dBm |
-48 dBm |
|
| 5 GHz 802.11ax (HE160) |
MCS0 |
25 dBm |
-73 dBm |
| MCS11 |
18 dBm |
-43 dBm |
|
| Bluetooth Radio |
RG-AP680-L |
| Bluetooth |
Bluetooth 5.0 iBeacon Bluetooth, applied to Bluetooth locating and Bluetooth applications |
| Antenna type |
Integrated omnidirectional antenna |
| Max. antenna gain |
5 dBi |
| Max. transmit power |
10 dBm |
| Receive sensitivity |
-88 dBm (@BLE) |
| Ports |
RG-AP680-L |
| Fixed service port |
1 x 10/100/1000Base-T Ethernet port with auto-negotiation, compliant-with IEEE 802.3af/802.3at standard 1 x GE SFP port |
| Fixed management port |
1 x RJ45 console port (serial console port) |
| Status LED |
1 x multi-color system status LED 3 x single-color RSSI LEDs |
| Button |
1 x Reset button ● Press the button for shorter than 2 seconds. Then the device restarts. ● Press the button for longer than 5 seconds. Then the device restores to factory settings. |
| Power Supply and Consumption |
RG-AP680-L |
| Input power supply |
The AP supports the following two power supply modes: ● 48 V DC/0.35 A power input over DC connector: The DC connector accepts 2.0 mm/6.3 mm center-positive circular plug. A DC power adapter needs to be purchased independently. ● PoE input over ETH/PoE: The power source equipment (PSE) complies with IEEE 802.3af/at standard (PoE/PoE+). Note: ● If both DC power and PoE are available, DC power is preferred. |
| Power consumption |
Max power consumption: 12.95 W ● DC powered: 12.95 W ● PoE powered (802.3af): 12.95 W ● PoE+ powered (802.3at): 12.95 W ● PoE++ powered (802.3bt): 12.95 W ● Idle mode: 6.0 W |
| Environment and Reliability |
RG-AP680-L |
| Temperature |
Operating temperature: –40°C to +65°C (–40°F to +149°F) Storage temperature: –40°C to +85°C (–40°F to +185°F) Note: At an altitude between 3,000 m (9,843 ft.) and 5,000 m (16,404 ft.), every time the altitude increases by 220 m (722 ft.), the maximum temperature decreases by 1°C (1.8°F). |
| Humidity |
Operating humidity: 0% to 100% RH (non-condensing) Storage humidity: 0% to 100% RH (non-condensing) |
| IP rating |
IP68 |
| Mean Time Between Failure (MTBF) |
> 250,000 hours |
| Regulatory Compliance |
RG-AP680-L |
| Regulatory compliance |
EN 55032 EN 55035 EN 61000-3-3 EN IEC 61000-3-2 EN 301 489-1 EN 301 489-3 EN 301 489-17 EN 300 328 EN 301 893 EN 300 440 FCC Part 15 EN IEC 62311 IEC 62368-1 EN 62368-1 |
*For more country-specific regulatory information and approvals, contact your local sales agency.
| Applicable Software Version |
RG-AP680-L |
| Applicable software version |
RGOS11.9(6)W3B3 or later |
| WLAN |
RG-AP680-L |
| Max. number of associated STAs |
1,024 (up to 512 STAs per radio) |
| Max. number of BSSIDs |
32 (up to 16 BSSIDs per radio) |
| STA management |
SSID hiding Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN attributes independently. Remote intelligent perception technology (RIPT) Intelligent client identification technology Intelligent load balancing based on the STA quantity or traffic |
| STA limiting |
SSID-based STA limiting Radio-based STA limiting |
| Bandwidth limiting |
STA/SSID/AP-based rate limiting |
| Wireless roaming |
Layer 2 and Layer 3 roaming |
| Security |
RG-AP680-L |
| Authentication and encryption |
Remote Authentication Dial-In User Service (RADIUS) PSK, web, 802.1x and MSCHAPv2 authentication QR code-based guest authentication (used with the RG-WS series wireless access controller) SMS authentication (used with the RG-WS series wireless access controller) MAB authentication (used with the RG-WS series wireless access controller) Data encryption: WPA-TKIP, WPA-PSK, WPA2-AES, WEP (64/128-bit) |
| Data frame filtering |
Allowlist, static blocklist, and dynamic blocklist |
| WIDS |
User isolation Rogue AP detection and containment |
| ACL |
Dynamic ACL assignment |
| CPP |
Supported |
| NFPP |
Supported |
| Routing and Switching |
RG-AP680-L |
| IP service |
Static IPv4 address and DHCP-assigned IPv4 address NAT, FTP ALG, DNS ALG |
| Multicast |
Multicast-to-unicast conversion |
| IPv6 basics |
IPv6 addressing, Neighbor Discovery (ND), ICMPv6, IPv6 ping IPv6 DHCP client |
| IP routing |
IPv4/IPv6 static routing |
| VPN |
PPPoE client IPsec VPN |
| Management |
RG-AP680-L |
| Network management |
Fault inspection and alarm Information statistics and logging |
| Network management platform |
Web-based management (Eweb) |
| User access management |
Telnet, SSH, SNMP , and TFTP-based management |
| Fat/Fit/Cloud mode switchover |
When the AP works in Fit mode, it can be switched to Fat mode through an AC. When the AP works in Fat mode, it can be switched to Fit mode through the console port or Telnet. When the AP works in Cloud mode, it can be managed through Ruijie Cloud. |
Order Information
| Model |
Description |
| RG-AP680-L |
Wi-Fi 6 dual-radio wireless access point Compliance with IEEE 802.11a/b/g/n/ac and 802.11ax standards Built-in omnidirectional antennas Up to four spatial streams Data rate of up to 2.975 Gbps Fat/Fit/Cloud mode switchover Electrical and optical uplink ports IEEE 802.3af/at-compliant (PoE/PoE+) power supply and DC power supply (48 V/0.35 A) |
