Partners
Log in
Compare Products
Hide
VS
Outdoor scenarios covering higher education, wireless cities, energy, and business malls
Models
Series
Highlight Features
The AP can be flexibly deployed in the scenarios covering higher education, wireless cities, energy, business malls.
IP68 rating protection against dust and water, avoiding liquid and sand intrusion
Secure scanning
Data transmission
| Hardware Specifications |
RG-AP680-AR |
| 802.11n |
14 spatial streams ● Radio 1 – 2.4 GHz: 4x4 MIMO, four spatial streams ● Radio 2 – 5 GHz: 4x4 MIMO, four spatial streams ● Radio 3 – 5 GHz: 4x4 MIMO, four spatial streams ● Radio 4 – 2.4 GHz/5 GHz: 2x2 MIMO, two spatial streams Channels: ● Radio 1 – 2.4 GHz: 20 MHz and 40 MHz ● Radio 2 – 5 GHz: 20 MHz and 40 MHz ● Radio 3 – 5 GHz: 20 MHz and 40 MHz ● Radio 4 –2.4 GHz/5 GHz: 20 MHz and 40 MHz Combined peak data rate: 2.1 Gbps ● Radio 1 – 2.4 GHz: 6.5 Mbps to 600 Mbps (MCS0 to MCS31) ● Radio 2 – 5 GHz: 6.5 Mbps to 600 Mbps (MCS0 to MCS31) ● Radio 3 – 5 GHz: 6.5 Mbps to 600 Mbps (MCS0 to MCS31) ● Radio 4 –2.4 GHz/5 GHz: 6.5 Mbps to 300 Mbps (MCS0 to MCS15) Radio technologies: Orthogonal Frequency-Division Multiplexing (OFDM) Modulation types: BPSK, QPSK, 16-QAM, 64-QAM Packet aggregation: ● Aggregate MAC Protocol Data Unit (A-MPDU) ● Aggregate MAC Service Data Unit (A-MSDU) Dynamic Frequency Selection (DFS) Cyclic Delay/Shift Diversity (CDD/CSD) Maximum Ratio Combining (MRC) Space-Time Block Coding (STBC) Low-Density Parity Check (LDPC) Transmit beam-forming (TxBF) |
| 802.11ac |
10 spatial streams ● Radio 2 – 5 GHz: 4x4 MIMO, four spatial streams ● Radio 3 – 5 GHz: 4x4 MIMO, four spatial streams ● Radio 4 – 5 GHz: 2x2 MIMO, two spatial streams Channels: ● Radio 2 – 5 GHz: 20 MHz, 40 MHz, 80 MHz, and 160 MHz ● Radio 3 – 5 GHz: 20 MHz, 40 MHz, 80 MHz, and 160 MHz ● Radio 4 –5 GHz: 20 MHz, 40 MHz, and 80 MHz Combined peak data rate: 7.801 Gbps ● Radio 2 – 5 GHz: 6.5 Mbps to 3.467 Gbps (MCS0 to MCS9) ● Radio 3 – 5 GHz: 6.5 Mbps to 3.467 Gbps (MCS0 to MCS9) ● Radio 4 – 5 GHz: 6.5 Mbps to 0.867 Gbps (MCS0 to MCS9) Radio technologies: Orthogonal Frequency-Division Multiplexing (OFDM) Modulation types: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM Packet aggregation: ● Aggregate MAC Protocol Data Unit (A-MPDU) ● Aggregate MAC Service Data Unit (A-MSDU) Dynamic Frequency Selection (DFS) Cyclic Delay/Shift Diversity (CDD/CSD) Maximum Ratio Combining (MRC) Space-Time Block Coding (STBC) Low-Density Parity Check (LDPC) Transmit beam-forming (TxBF) |
| 802.11ax |
12 spatial streams ● Radio 1 – 2.4 GHz: 4x4 uplink/downlink MU-MIMO, four spatial streams ● Radio 2 – 5 GHz: 4x4 uplink/downlink MU-MIMO, four spatial streams ● Radio 3 – 5 GHz: 4x4 uplink/downlink MU-MIMO, four spatial streams Channels: ● Radio 1 – 2.4 GHz: 20 MHz and 40 MHz ● Radio 2 – 5 GHz: 20 MHz, 40 MHz, 80 MHz, and 160 MHz ● Radio 3 – 5 GHz: 20 MHz, 40 MHz, 80 MHz, and 160 MHz Combined peak data rate: 10.755 Gbps ● Radio 1 – 2.4 GHz: 8.6 Mbps to 1.147 Gbps (MCS0 to MCS11) ● Radio 2 – 5 GHz: 8.6 Mbps to 4.804 Gbps (MCS0 to MCS11) ● Radio 3 – 5 GHz: 8.6 Mbps to 4.804 Gbps (MCS0 to MCS11) Radio technologies: uplink/downlink Orthogonal Frequency-Division Multiple Access (OFDMA) Modulation types: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM Packet aggregation: ● Aggregate MAC Protocol Data Unit (A-MPDU) ● Aggregate MAC Service Data Unit (A-MSDU) Dynamic Frequency Selection (DFS) Cyclic Delay/Shift Diversity (CDD/CSD) Maximum Ratio Combining (MRC) Space-Time Block Coding (STBC) Low-Density Parity Check (LDPC) Transmit beam-forming (TxBF) WPA3 |
| Antenna |
Wi-Fi ● 2.4 GHz: four built-in omnidirectional antennas, the max. antenna gain is 6 dBi. ● 5 GHz: eight built-in omnidirectional antennas, the max. antenna gain is 8 dBi. Bluetooth ● One integrated vertically polarized omnidirectional antenna, the max. antenna gain is 4 dBi. |
| Port |
1 x 100/1000/2500/5000Base-T RJ45 Ethernet port with auto-negotiation 1 x 100/1000Base-T RJ45 Ethernet port with auto-negotiation 2 x 10GE optical ports,compatibility with 1GE and 2.5GE 1 x RJ45 console port (serial console port) 1 x Bluetooth 5.1 |
| Status LED |
1 x multi-color system status LED ● AP power-on status ● Software initialization status and upgrade status ● Uplink service interface status ● Wireless user online status ● CAPWAP tunnel timeout ● Specific AP locating Three single-color signal strength LEDs: ● Whether bridging is enabled ● Whether bridging is successful ● Wireless signal strength after successful bridging |
| Button |
1 x Reset button ● Press the button for shorter than 2 seconds. Then the device restarts. ● Press the button for longer than 5 seconds. Then the device restores to factory settings. |
| Dimensions (W x D x H) |
Main unit: 300 mm x 300 mm x 94 mm (11.81 in. x 11.81 in. x 3.70 in.) Shipping: 470 mm x 410 mm x 170 mm (18.50 in. x 16.14 in. x 6.69 in.) |
| Weight |
Main unit: 4.3 kg (9.48 lbs) Mounting bracket: 1.2 kg (2.65 lbs) Shipping: 7.18 kg (15.83 lbs) |
| Mounting |
Wall or pole-mounting (a mounting bracket is delivered with the main unit) |
| Input power supply |
The AP supports the following two power supply modes: ● 100–240 V AC power supply: The device is equipped with the RG-PL-M16-3M cable, and 1 A current must be guaranteed. The AC power supply needs to be purchased separately. ● PoE input over ETH/PoE: The power source equipment (PSE) complies with IEEE 802.3af/at/bt standard (PoE/PoE+/PoE++). Note: If both AC power and PoE are available, AC power is preferred. |
| Power consumption |
Maximum power consumption: 50 W ● AC power: 50 W, 2.4 GHz radio 4x4, 5 GHz radio 4x4, LAN 2 for PoE supply ● 802.3bt (PoE++) : 50 W, 2.4 GHz radio 4x4, 5 GHz radio 4x4, LAN 2 for PoE supply ● 802.3at (PoE+) : 25 W, 2.4 GHz radio 4x4, 5 GHz radio 4x4, and Radio 3 and AI Radio disabled (LAN 2 fails to provide power for external devices ) ● 802.3af (PoE) : 12.95 W (all radios do not work, and LAN 2 fails to provide power for external devices) ● Idle mode: 10 W |
| Environment |
Storage temperature: –40°C to +85°C (–40°F to +185°F) Storage humidity: 5% RH to 95% RH (non-condensing) Storage altitude: < 5,000 m (16,404.20 ft.) at 25°C (77°F) Operating temperature: –40°C to +70°C (–40°F to +158°F) Operating humidity: 5% RH to 95% RH (non-condensing) Operating altitude: < 5,000 m (16,404.20 ft.) at 60°C (140°F) At an altitude between 3,000 m (9,842.52 ft.) and 5,000 m (16,404.20 ft.), every time the altitude increases by 166 m (546 ft.), the maximum temperature decreases by 1°C (1.8°F). |
| IP Rating |
IP68 |
| Surge protection |
6 kV |
| Mean Time Between Failure (MTBF) |
200,000 hours (22 years) at the operating temperature of 25°C (77°F) |
| System memory |
2 GB DRAM, 256 MB flash |
| Transmit power |
2.4 GHz ● Max. transmit power: 29 dBm (794.33 mW) ● Minimum transmit power: 9 dBm (7.94 mW) 5 GHz ● Max. transmit power: 27 dBm (501.19 mW) ● Minimum transmit power: 7 dBm (5.01 mW) Note: The transmit power adjusted in percentage. The transmit power is limited by local regulatory requirements. |
The following table lists the radio frequency performance of Wi-Fi including different frequency bands, protocols, and date rates. It is country-specific, and Ruijie Networks reserves the right of interpretation.
| Radio Frequency Performance |
RG-AP680-AR |
||
| Frequency Band and Protocol |
Data Rate |
Max. Transmit Power per Transmit Chain |
Max. Receive Sensitivity per Receive Chain |
| 2.4 GHz, 802.11b |
1 Mbps |
23 dBm |
–94 dBm |
| 2 Mbps |
23 dBm |
–91 dBm |
|
| 5.5 Mbps |
22 dBm |
–90 dBm |
|
| 11 Mbps |
21 dBm |
–88 dBm |
|
| 2.4 GHz, 802.11g |
6 Mbps |
23 dBm |
–89.5 dBm |
| 24 Mbps |
22 dBm |
–83 dBm |
|
| 36 Mbps |
22 dBm |
–79 dBm |
|
| 54 Mbps |
20 dBm |
–73 dBm |
|
| 2.4 GHz, 802.11n (HT20) |
MCS0 |
23 dBm |
–86 dBm |
| MCS7 |
20 dBm |
–68 dBm |
|
| 2.4 GHz, 802.11n (HT40) |
MCS0 |
23 dBm |
–83 dBm |
| MCS7 |
20 dBm |
–65 dBm |
|
| 2.4 GHz, 802.11ax (HE20) |
MCS0 |
23 dBm |
–86 dBm |
| MCS11 |
18 dBm |
–68 dBm |
|
| 2.4 GHz, 802.11ax (HE40) |
MCS0 |
23 dBm |
–83 dBm |
| MCS11 |
18 dBm |
–54 dBm |
|
| 5 GHz, 802.11a |
6 Mbps |
21 dBm |
–89.5 dBm |
| 24 Mbps |
20 dBm |
–83 dBm |
|
| 36 Mbps |
20 dBm |
–79 dBm |
|
| 54 Mbps |
18 dBm |
–73 dBm |
|
| 5 GHz, 802.11n (HT20) |
MCS0 |
21 dBm |
–86 dBm |
| MCS7 |
18 dBm |
–68 dBm |
|
| 5 GHz, 802.11n (HT40) |
MCS0 |
21 dBm |
–83 dBm |
| MCS7 |
18 dBm |
–65 dBm |
|
| 5 GHz, 802.11ac (VHT20) |
MCS0 |
21 dBm |
–86 dBm |
| MCS9 |
17 dBm |
–61 dBm |
|
| 5 GHz, 802.11ac (VHT40) |
MCS0 |
21 dBm |
–83 dBm |
| MCS9 |
17 dBm |
–57 dBm |
|
| 5 GHz, 802.11ac (VHT80) |
MCS0 |
21 dBm |
–80 dBm |
| MCS9 |
17 dBm |
–53 dBm |
|
| 5 GHz, 802.11ax (HE20) |
MCS0 |
21 dBm |
–86 dBm |
| MCS11 |
14 dBm |
–58 dBm |
|
| 5 GHz, 802.11ax (HE40) |
MCS0 |
21 dBm |
–83 dBm |
| MCS11 |
14 dBm |
–54 dBm |
|
| 5 GHz, 802.11ax (HE80) |
MCS0 |
21 dBm |
–80 dBm |
| MCS11 |
14 dBm |
–52 dBm |
|
| 5 GHz, 802.11ax (HE160) |
MCS0 |
21 dBm |
–77 dBm |
| MCS11 |
14 dBm |
–49 dBm |
|
| Basic Function |
RG-AP680-AR |
| Applicable software version |
RGOS11.9(6)W1B5 or later |
| WLAN |
|
| Max. number of associated STAs |
1,536 (up to 512 STAs per radio) |
| Max. number of BSSIDs |
48 (up to 16 BSSIDs per radio) |
| Max. number of WLAN IDs |
16 |
| STA management |
SSID hiding Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN attributes independently. Remote Intelligent Perception Technology (RIPT) Intelligent STA identification Intelligent load balancing based on the STA quantity or traffic |
| STA limiting |
SSID-based STA limiting Radio-based STA limiting |
| Bandwidth limiting |
STA/SSID/AP-based rate limiting |
| CAPWAP |
IPv4/IPv6 CAPWAP Layer 2 and Layer 3 topology between an AP and an AC An AP can automatically discover the accessible AC. An AP can be automatically upgraded through the AC. An AP can automatically download the configuration file from the AC. CAPWAP through NAT |
| Data forwarding |
Centralized and local forwarding |
| Wireless roaming |
Layer 2 and Layer 3 roaming |
| Wireless locating |
MU and TAG device locating |
| Security and Authentication |
|
| Authentication and encryption |
Remote Authentication Dial-In User Service (RADIUS) PSK and web authentication QR code-based guest authentication, SMS authentication, and MAC address bypass (MAB) authentication Data encryption: WEP (64/128 bits), WPA (TKIP), WPA-PSK, WPA2 (AES) , WPA3-Enterprise, WPA3-Individual |
| Data frame filtering |
Allowlist, static blocklist, and dynamic blocklist |
| WIDS |
Wireless Intrusion Detection System(WIDS) User isolation Rogue AP detection and containment |
| ACL |
IP standard ACL, MAC extended ACL, IP extended ACL, and expert-level ACL Time range-based ACL ACL based on a Layer 2 interface ACL based on a Layer 3 interface Ingress ACL based on a wireless interface Dynamic ACL assignment based on 802.1X authentication (used with the AC) |
| CPP |
CPU Protect Policy (CPP) |
| NFPP |
Network Foundation Protection Policy (NFPP) |
| Routing and Switching |
|
| MAC |
Static and filtered MAC addresses MAC address table size: 2,048 Max. number of static MAC addresses: 2,048 Max. number of filtered MAC addresses: 2,048 |
| Ethernet |
Jumbo frame length: 1,518 Full-duplex and half-duplex modes of interfaces IEEE802.1p and IEEE802.1Q Optical module information display, alarms about faults, and diagnosis parameter measurement (QSFP+/SFP+/SFP) |
| VLAN |
Interface-based VLAN assignment Max. number of SVIs: 187 Max. number of VLANs: 4,094 VLAN ID range: 1–4,094 |
| ARP |
ARP entry aging, gratuitous ARP learning, and proxy ARP Max. number of ARP entries: 2,048 ARP check |
| IPv4 services |
Static and DHCP-assigned IPv4 addresses NAT, FTP ALG and DNS ALG |
| IPv6 services |
IPv6 addressing, Neighbor Discovery (ND), IPv6 ND proxy, ICMPv6, IPv6 ping IPv6 DHCP client |
| IP routing |
IPv4/IPv6 static route Max. number of static IPv4 routes: 1,024 Max. number of static IPv6 routes: 1,000 |
| Multicast |
Multicast-to-unicast conversion |
| VPN |
PPPoE client IPsec VPN |
| Network Management and Monitoring |
|
| Network management |
NTP server and NTP client SNTP client SNMPv1/v2c/v3 Fault detection and alarm Information statistics and logging |
| Network management platform |
Web management (Eweb) |
| User access management |
Telnet, SSH, FTP client, FTP server, and TFTP client |
| Switchover among Fat, Fit, and cloud modes |
When the AP works in Fit mode, it can be switched to Fat mode through an AC. When the AP works in Fat mode, it can be switched to Fit mode through the console port or Telnet mode. When the AP works in cloud mode, it can be managed through Ruijie Cloud. |
The following value-added software functions can be achieved with the WIS solution (used with RG-iData-WIS and wireless controller).
| Value-added Software |
RG-AP680-AR |
| Intelligent O&M |
|
| Experience |
Network operation analysis, such as device stability and signal coverage Measuring users' network experience based on indicators such as the latency, packet loss, signal strength, and channel utilization, and visualizing results of the network experience Statistics on the number of online and offline failures of STAs associated with different APs, average signal strength, and other parameters VIP monitoring and alarm, and custom alarm thresholds STA global experience map and experience coverage evaluation based on the time range STA access protocol replay and fine-grained STA fault diagnosis Note: To support the preceding functions, ensure that the AP works in Fit mode. |
| Network optimization |
Network performance optimization, including one-click network optimization and scenario-based optimization Client steering to cope with roaming stickiness, and experience indicator comparison Client steering to cope with remote association, and experience indicator comparison One-click diagnosis – analyzing problems and providing suggestions |
| Big data |
Baseline analysis – recording the configuration, version, and other changes, and tracking network KPI changes Time capsule – analyzing the device version and configuration change history |
| Regional analysis |
Batch generation of building floor information – uploading floor plans, and dragging and dropping AP positions |
| One-click report |
One-click health report – generating a report on the overall operation of a network |
| Security radar |
Unauthorized Wi-Fi signal location, presentation by category, and containment |
| Cloud Management |
|
| Management and maintenance |
Uniformly connecting, managing, and maintaining APs, ACs, and other devices, batch device configuration and upgrade, and other functions Deployment through Zero Touch Provisioning (ZTP) – creating configuration templates and automatically applying configured templates One-click discovery of the wired and wireless network topology and topology generation |
| Cloud Authentication |
|
| Authentication mode |
SMS authentication, fixed account authentication, one-click authentication, Facebook authentication, Instagram authentication, voucher authentication, and other authentication modes Authentication implemented in the cloud, without the need to deploy the local authentication server |
| Customized portal |
Customized Portal authentication page for mobile phones and PCs |
| SMS gateway |
Interconnection with SMS gateways of GUODULINK and Alibaba Cloud |
| Platform Capabilities |
|
| Big data capabilities |
Mainstream persistence solutions based on Hadoop, MongoDB, and MySQL, providing distributed storage capabilities Spark-based big data computing capabilities Data warehouse building based on Hive, and data model conversion, integration, and other functions |
| Hierarchy and decentralization |
Authorizing different applications for different users to meet service needs of different departments Granting operation permissions to administrators in different scenarios |
| System management |
Account operation, authorization configuration, email configuration, configuration backup, exception alarms, and other system management functions |
Note: For details, refer to the latest hybrid cloud management solution.
| Regulatory Compliance |
RG-AP680-AR |
| Regulatory compliance | EN 55032, EN 55035, EN 61000-3-3, EN IEC 61000-3-2, EN 301 489-1, EN 301 489-3, EN 301 489-17, EN 300 328, EN 301 893, EN 300 440, FCC Part 15, EN IEC 62311, IEC 62368-1, EN 62368-1, and IEC 60950-22 |
* For more country-specific regulatory information and approvals, contact your local sales agency.
| Model |
Description |
Remarks |
| RG-AP680-AR |
Wi-Fi 6 (802.11ax-compliant) outdoor high-density wireless access point Quad-radio, 14 spatial streams, peak data rate of 11.622 Gbps ● Radio 1: 2.4 GHz: four spatial streams, 4x4 MU-MIMO, peak data rate of 1.147 Gbps ● Radio 2: 5 GHz: four spatial streams, 4x4 MU-MIMO, peak data rate of 4.804 Gbps ● Radio 3: 5 GHz: four spatial streams, 4x4 MU-MIMO, peak data rate of 4.804 Gbps ● Radio 4: 2.4GHz/5 GHz: two spatial streams, 2x2 MIMO, 2.4 GHz peak data rate of 0.3 Gbps, 5 GHz peak data rate of 0.867 Gbps 802.11a/b/g/n/ac/ax, switching between Fat, Fit, and cloud modes, and 802.3at/at/bt PoE and local AC power supply Note: ● The power source equipment (PSE) needs to be purchased separately. ● The AC power supply needs to be purchased separately. |
Required |
| RG-ANTx4-2400D |
External antenna used by the RG-AP680-AR, panel directional antenna, 2.4 GHz, 4 × 4 MIMO, antenna gain of 12 dBi, and built-in feeder set: 1 m, N-N, four feeders Each RG-AP680-AR can equipped with only one feeder set. |
Optional |
| RG-ANTx4-5000D |
External antenna used by the RG-AP680-AR switches, panel directional antenna, 5 GHz, 4 × 4 MIMO, antenna gain of 12 dBi, and built-in feeder set: 1 m, N-N, four feeders Each RG-AP680-AR can equipped with two feeder sets. |
Optional |
| RG-PL-M16-3M |
Selected when local 220 V AC mains supply is used. Local external cable, M16 power cable, power cable, 3020 mm, CRCC low smoke zero halogen power cable, red, white, black, 16M-3 A, 1 A, 220 V, RoHS |
Optional |
| RG-E-160 (10GE) |
Selected when the power adapter is used for power supply. Single-port Ethernet PoE adapter; Input: 100–240 V, 50/60 Hz, 1.5 A MAX; Output: 54 V DC, 1.11 A |
Optional |
Ruijie Networks websites use cookies to deliver and improve the website experience.
See our cookie policy for further details on how we use cookies and how to change your cookie settings.
Cookie Manager
When you visit any website, the website will store or retrieve the information on your browser. This process is mostly in the form of cookies. Such information may involve your personal information, preferences or equipment, and is mainly used to enable the website to provide services in accordance with your expectations. Such information usually does not directly identify your personal information, but it can provide you with a more personalized network experience. We fully respect your privacy, so you can choose not to allow certain types of cookies. You only need to click on the names of different cookie categories to learn more and change the default settings. However, blocking certain types of cookies may affect your website experience and the services we can provide you.
Through this type of cookie, we can count website visits and traffic sources in order to evaluate and improve the performance of our website. This type of cookie can also help us understand the popularity of the page and the activity of visitors on the site. All information collected by such cookies will be aggregated to ensure the anonymity of the information. If you do not allow such cookies, we will have no way of knowing when you visited our website, and we will not be able to monitor website performance.
This type of cookie is necessary for the normal operation of the website and cannot be turned off in our system. Usually, they are only set for the actions you do, which are equivalent to service requests, such as setting your privacy preferences, logging in, or filling out forms. You can set your browser to block or remind you of such cookies, but certain functions of the website will not be available. Such cookies do not store any personally identifiable information.
Contact Us
How can we help you?
Global / EN
