Smart Wireless Coverage
●802.11ac Gigabit Access Rate
The 5GHz band of RG-AP530-I V2 Series supports 802.11ac, the next-generation Wi-Fi standard, and offers a maximum connection rate up to 1300Mbps. When the dual bands operate simultaneously, the APs achieve an ultra-fast speed of up to 1.75Gbps. Comparing to the conventional 802.11n standard, the throughput is greatly enhanced. The RG-AP530-I V2 delivers a truly high-speed user experience.
Maximum Throughput of RG-AP530-I V2 up to 1750Mbps
●Remarkable Energy-saving Design
The RG-AP530-I V2 adopts advanced power-saving features including single-antenna standby, dynamic MIMO power saving, enhanced transmission technology with automatic power saving and packet-by-packet power control. Coupled with the high-performance power supply design, the APs guarantee high-speed wireless access and maximized signal coverage under 802.3af power supply.
●Industry-leading Local Forwarding Technology
In collaboration with Ruijie RG-WS Wireless AC Series, users can flexibly pre-set a forwarding mode for the RG-AP530-I V2. The APs can determine whether to forward data to the AC according to a SSID or user VLAN, or directly send the data to a wired network for data exchange.
The local forwarding technology can forward large-scale, delay-sensitive and real-time transmission data through the wired network. The feature significantly alleviates the traffic pressure on the wireless controllers and better fulfills the high traffic transmission requirements of 802.11ac network.
●Abundant QoS Policies
The RG-AP530-I V2 supports an extensive array of QoS policies. For example, it provides bandwidth limitations in WLAN/AP/STA modes and Wi-Fi multimedia (WMM) that defines different priorities for different service data. The RG-AP500 Series realizes timely and quantitative transmission of audio and video and guarantees smooth operation of multi-media applications.
With the multicast-to-unicast conversion technology, the RG-AP530-I V2 resolves the video interruption problem due to packet loss or long delay in the wireless Video on Demand (VoD) system. The RG-AP530-I V2 highly enhances user experience with multicast video over wireless networks.
PPSK Enterprise Authentication
For internal staff, it is hassled to maintain the pre-defined PSK and distribute among them. Especially for offboarding employee, potential Wi-Fi PSK leaked out could be harmful to your network.
With Ruijie PPSK, you now can easily provide different Wi-Fi password for each user. It tied to individual end user devices like laptop or smartphone and the same password can’t be used by other. Possibility of Wi-Fi password leak out eliminated completely
Simple and Effective Wireless Security Practice
Model | RG-AP530-I V2 |
|
Radio | Concurrent dual-radio dual-band |
|
Protocol | 802.11a/b/g/n/ac |
|
Operating Bands | 802.11b/g/n: 2.4GHz to 2.483GHz |
|
802.11a/n/ac: 5.150GHz to 5.350GHz, 5.47GHz to 5.725GHz, 5.725GHz to 5.850GHz (vary depending on countries) |
||
Antenna | Built-in Antenna |
|
3×3 MIMO |
||
Spatial Streams | 3 |
|
Max Throughput | 1750Mbps |
|
Modulation | OFDM: BPSK@6/9Mbps |
|
QPSK@12/18Mbps |
||
16-QAM@24Mbps |
||
64-QAM@48/54Mbps |
||
DSSS: |
||
DBPSK@1Mbps |
||
DQPSK@2Mbps |
||
CCK@5.5/11Mbps |
||
MIMO-OFDM: |
||
BPSK, QPSK, 16QAM, 64QAM and 256QAM |
||
Receiver Sensitivity | 11b: -93dBm(1Mbps), -89dBm(5Mbps), -87dBm(11Mbps) |
|
11a/g: -89dBm(6Mbps), -82dBm(24Mbps), -78dBm(36Mbps), -72dBm(54Mbps) |
||
11n: -85dBm@MCS0, -67dBm@MCS7, -83dBm@MCS8, -65dBm@ MCS15 |
||
11ac HT20: -85dBm (MCS0) , -60dBm (MCS9) |
||
11ac HT40: -82dBm (MCS0), -60dBm (MCS9) |
||
11ac HT80: -79dBm (MCS0) , -54dBm (MCS9) |
||
Transmit Power | 100mw |
|
Adjustable Power | 1dBm |
|
Service Port | 2 10/100/1000BASE-T Ethernet ports |
|
Management Port | 1 console port |
|
LED Indicators | 1 LED (red, green, blue, orange, and flashing modes, breathing flashing mode for smart device access, and the indicator can be switched off to silent mode) |
|
IP Rating | IP41 |
|
Safety Standard | GB4943, EN/IEC 60950-1 |
|
EMC Standard | GB9254, EN301 489 |
|
Health Standard | EN 62311 |
|
Radio Standard | EN300 328, EN301 893 |
|
Bluetooth | BT4.0 (BLE) | N/A |
iBeacon |
||
WLAN | Maximum clients per AP | Up to 256 |
BSSID capacity | Up to 16 per radio Up to 32 per AP |
|
SSID hiding | Support |
|
Remote Intelligent Perception Technology (RIPT) | Support |
|
X-speed | Support |
|
STA control | SSID/radio-based |
|
Bandwidth control | STA/SSID/AP-based speed control |
|
Preference for 5GHz (band select) | Support |
|
Security | PSK, Web, and 802.1x authentication | Support |
Data encryption | WPA (TKIP), WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits) |
|
QR code authentication | Support |
|
SMS authentication | Support |
|
PEAP authentication | Support |
|
Data frame filtering | Whitelist, static/dynamic blacklist |
|
User isolation | Support |
|
Rogue AP detection and countermeasure | Support |
|
Dynamic ACL assignment | Support |
|
WAPI | Support |
|
RADIUS | Support |
|
CPU Protection Policy (CPP) | Support |
|
Network Foundation Protection Policy (NFPP) | Support |
|
L2 Features | IGMP snooping | Support |
VLAN features | Support |
|
Routing | IPv4 address | Static IP address |
IPv6 CAPWAP tunnel | Support |
|
ICMPv6 | Support |
|
IPv6 address | Manual or automatic configuration |
|
Multicast | Multicast to unicast conversion |
|
Location-based Service | Wireless position tracking | Support |
Management and Maintenance | Network management | SNMP v1/v2C/v3, Telnet, SSH, TFTP, FTP and web management |
Real-time spectrum analysis | Support |
|
(need to integrate with SNC) |
||
Fault detection and alarm | Support |
|
Statistics and logs | Support |
|
FAT/FIT switching | The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC. |
|
The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet. |
||
Dimensions (W x D x H) (mm) | 205 × 205 × 42 |
|
Weight | 0.7kg |
|
Installation Mode | Ceiling/wall-mountable |
|
Power Supply | Local power supply and PoE (802.3af) |
|
Power Consumption | <12.95W |
|
Temperature | Operating Temperature: -10°C to 50°C |
|
Storage Temperature: -40°C to 70°C |
||
Humidity | Operating Humidity: 5% to 95% (non-condensing) |
|
Storage Humidity: 5% to 95% (non-condensing) |
Model | Description |
RG-AP530-I V2 | Indoor Wireless Access Point, dual-radio, dual-band, 3 spatial streams, access rate up to 1750Mbps per AP, support concurrent 802.11ac and 802.11a/b/g/n, FAT/FIT modes, 1 10/100/1000BASE-T uplink port, support PoE and local power supply |