Picture

RG-AP880-AR Wi-Fi 6 Quad-Radio 8642 Mbps High-Density Indoor Access Point, 5Gbps Combo SFP Port

Indoor high-density scenarios in the higher education, government, general education, finance, and business sectors

Models

Series

Highlight Features

5G optical port and 5G electrical port for flexible networking
Upgraded to Wi-Fi 6, a combined data rate of up to 8642 Mbps
Al radio for intelligent guidance of STA roaming, ensuring service continuity
Independent Al Radio for security protection, delivering better experiences and higher security
Unified WIS cloud management, intelligent O&M

Overview
FAQ
Documents
Specifications
Order Information

Key Specification

Wi-Fi 6 High-Density Indoor AR Series AP
RG-AP880-AR

Maximum Data Rate
8642Mbps

All-Optical i-Share+
Solution

Independent AI Radio

10 Spatial Streams

Bluetooth 5.1

5G Optical Port and 5G Electrical
Port for Flexible Networking

One 5G optical port supports higher bandwidth. With Ruijie All-Optical i-Share+ Solution, this port helps achieve all-optical gigabit access in rooms.
One 5G electrical port is also provided to meet existing networking requirements.

Upgraded to Wi-Fi 6
Achieving a Combined Data Rate of Up to 8642 Mbps

High Concurrency

OFDMA and MU-MIMO are introduced to
ensure stable access of multiple STAs

Low Latency

OFDMA is applied to transmit data to
multiple STAs simultaneously. The
latency is as low as 20 ms.

High Security

The next-generation wireless encryption
protocol WPA3 greatly improves the
security of wireless connection.

High Speed

With 1024-QAM modulation, the
data transmission rate is 25%
higher than 802.11ac.

Al Radio for Intelligent Guidance of STA
Roaming, Ensuring Service Continuity

The built-in Al Radio independently scans STA status, and reports the scanning result of neighbor APs to ACs. The ACs then guide STAs to quickly access an AP with better signals.
In this way, STAs can maintain a good signal quality during movement, thereby achieving low latency, no lagging, and service continuity in roaming.

Traditional Settled AP

Average roaming latency: 300ms
Packet loss rate: 2%

RG-AP880-AR

Average roaming latency: < 30ms
Packet loss rate: < 0.5%

Independent AI Radio for Secure Scanning
Safeguarding Wireless Network Security

Different from traditional, periodic, single-radio scanning with blind spots, AI Radio performs independent, real-time, full-radio, secure scanning.
The secure scanning does not occupy communication radio resources or affect wireless performance, ensuring good network experiences.

AI Radio

Traditional AP

24/7 real-time scanning

5G/2.4G full-radio scanning

Legend:

Secure scanning

Data transmission

Independent AI Radio for Secure
Scanning, Safeguarding
Wireless Network Security

Different from traditional, periodic, single-radio scanning with
blind spots, AI Radio performs independent, real-time, full-radio,
secure scanning.
The secure scanning does not occupy communication radio
resources or affect wireless performance, ensuring good
network experiences.

AI Radio

Traditional AP

Unified Cloud Management
Intelligent Tuning and Easier O&M

WIS Cloud Network enables network-wide configuration and tuning, removing the need of onsite commissioning.
It also supports O&M on the mobile app Wi-Fi Moho.
With early warning of network faults, wireless networks can be monitored anytime and anywhere.

Go to WIS ->

Cloud O&M

24h Network Optimization

Real-Time Warning

Fault Locating

FAQ

Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.

Ask a Question

Documents

RG-AP880-AR、RG-AP850-AR(V3) EU-DOC

Ruijie RG-AP880-AR Access Point Hardware Installation and Reference Guide(V1.1)

RG-AP880-AR Wi-Fi 6 Quad-radio Access Point Datasheet

Ruijie RG-WLAN Series Access Points Web-based Configuration Guide, RGOS11.9(6)W1B2 (V1.0)

Ruijie RG-AP880-AR Access Point Release Notes, AP_RGOS11.9(6)W1B2 (V1.4)

Ruijie RG-AP880-AR Wireless Access Point Firmware

All-Optical i-Share+ Solution for Higher Education

Ruijie RG-WLAN Series Access Points and Access Controllers Upgrade Guide (V1.0)

Specifications

Hardware Specifications

Dimensions and Weight	RG-AP880-AR
Physical Dimensions (W × D × H)	230 mm × 230 mm × 51 mm
Weight	Main unit: 1.0 kg Bracket: 0.1 kg
Installation	Ceiling/wall-mountable
Lock Option	Kensington lock and security latch

Radio Specifications	RG-AP880-AR
Radio Design	Quad-radio design, including one AI radio that can switch between the 2.4 GHz and 5 GHz frequency bands. Up to 10 patial streams; Radio1: 2.4 GHz: 2 spatial streams, 2 × 2 MIMO Radio 2: 5 GHz: 2 spatial streams, 2 × 2 MU-MIMO Radio 3: 5 GHz: 4 spatial streams, 4 × 4 MU-MIMO Radio 4: 2.4 GHz/5 GHz: 2 spatial streams, 2 × 2 MU-MIMO
Operating Frequencies	IEEE 802.11b/g/n/ax: 2.4 GHz to 2.4835 GHz IEEE 802.11a/n/ac/ax: 5.150 GHz to 5.350 GHz, 5.725 GHz to 5.850 GHz (Note: The operating band varies in different countries.)
Data Rate	Radio 1: 2.4 GHz, 575 Mbps Radio 2: 5 GHz, 2.4 Gbps Radio 3: 5 GHz, 4.8 Gbps Radio 4: 2.4 GHz/5 GHz, 300 Mbps/867 Mbps Maximum wireless rate of the AP: 2.4 GHz + 5 GHz + 5 GHz + 2.4 GHz, 8.075 Gbps 2.4 GHz + 5 GHz + 5 GHz + 5 GHz, 8.642 Gbps
Antenna Type	Built-in smart antenna
Antenna Gain	2.4 GHz: 3 dBi 5 GHz: 3 dBi
Max. Transmit Power	20 dBm (Note: The transmit power varies based on the regulations in different countries and regions.)
Power Adjustment	Configurable in increments of 1 dBm
Modulation	802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM
Receiver Sensitivity	IEEE 802.11b: –96 dBm (1 Mbps), –93 dBm (5 Mbps), –89 dBm (11 Mbps) IEEE 802.11a/g: –91 dBm (6 Mbps), –85 dBm (24 Mbps), –80 dBm (36 Mbps), –74 dBm (54 Mbps) IEEE 802.11n: –90 dBm@MCS0, –70 dBm@MCS7, –89 dBm@MCS8, –68 dBm@MCS15 IEEE 802.11ac: HT20: –88 dBm (MCS0), –63 dBm (MCS9) IEEE 802.11ac: HT40: –85 dBm (MCS0), –60 dBm (MCS9) IEEE 802.11ac: HT80: –82 dBm (MCS0), –57 dBm (MCS9) IEEE 802.11ax: HE80: –82 dBm (MCS0), –57 dBm (MCS9), –52 dBm (MCS11) IEEE 802.11ax: HE160: –79 dBm (MCS0), –53 dBm (MCS9), –50 dBm (MCS11)

Item	RG-AP880-AR
Bluetooth	Bluetooth 5.1
USB Port	USB 3.0
Fixed Service Port	One 100/1000/2500/5000Base-T Ethernet port with auto-neogitiation, IEEE 802.3af/802.3at/802.3bt-compliant One 5GE SFP port, compatible with 1GE and 2.5GE SFP modules One 10/100/1000Base-T Ethernet port with auto-neogitiation, supplying power to IoT modules (48 V/12.95 W)
Fixed Management Port	One RJ45 console port
Status LED	One system status LED
Button	One reset button

Power Supply and Consumption	RG-AP880-AR
Input Power Requirements	DC input: 54 V/1.1 A PoE/PoE+/PoE++ (IEEE 802.3af/at/bt-compliant) Note: If IEEE 802.3at-compliant PoE is adopted, the AP can be normally powered on, but AI Radio is disabled, and the downlink port and USB port cannot supply power to external devices.
Power Supply to External Device	Supported, supplying power to IoT modules through the PoE-capable Ethernet port
Max. Power Consumption	40 W

Environment and Reliability	RG-AP880-AR
Temperature	Operating temperature: –10°C to +50°C (14°F to 122°F) Storage temperature: –40°C to +70°C (–40°F to +158°F) At a height between 3000 m (9842.52 ft.) to 5000 m (16404.20 ft.) above the sea level, every time the altitude increases by 220 m (721.78 ft.), the maximum temperature decreases by 1°C (1.8°F).
Humidity	Operating humidity: 5%RH to 95%RH (non-condensing) Storage humidity: 5%RH to 95%RH (non-condensing)
Safety Standard	GB 4943.1, IEC 62368-1
EMC Standard	EN300386, GB19286, GB17618

Software Specifications	RG-AP880-AR
WLAN Functions	Maximum number of connected STAs: 1552 SSID hiding Separate authentication mode, encryption mechanism, and VLAN attributes for each SSID Remote Intelligent Perception Technology (RIPT) Intelligent terminal recognition technology Intelligent load balancing based on terminal quantity or traffic STA limit ● SSID-based STA limit ● Radio card-based STA limit Bandwidth limit: STA/SSID/AP-based rate limit Fat/Fit mode switching: ● When the device works in fit mode, it can be switched to fat mode via an AC. ● When the device works in fat mode, it can be switched to fit mode through the local console port or Telnet mode.
Security	PSK and web authentication Data encryption: WEP (64/128-bit), WPA (TKIP), WPA-PSK, WPA2 (AES), WPA3 WeChat-based authentication QR code-based visitor authentication SM-based authentication MAB authentication Data frame filtering: whitelist, static blacklist, dynamic blacklist User isolation Rogue AP detection and containment Dynamic ACL assignment Remote authentication dial in user service (RADIUS) CPU Protect Policy (CPP) Network Foundation Protection Policy (NFPP)
Routing Switching	IPv4 features: static IPv4 address and dynamic IPv4 address obtained via DHCP Multicast-to-unicast conversion PPPoE client IPSec VPN FTP ALG/DNS ALG
Management and Maintenance	Network management via Telnet or TFTP Web-based management Wireless positioning: RBIS Wireless marketing: WMC/MCP Fault detection and alarm Information statistics and logs

Order Information

Model	Description	Remarks
RG-AP880-AR	IEEE 802.11ax-compliant quad-radio wireless AP for indoor high-density scenarios. The device supports a maximum of 10 spatial streams and a maximum wireless rate of 8.642 Gbps. It can work in IEEE 802.11a/b/g/n/ac and IEEE 802.11ax modes, switch between fit mode and fat mode, and support IEEE 802.3bt/at/af-compliant PoE	Required