Picture

RG-SF2920-16GT2SFP-P, 16-Port GE All-Optical PoE Switch, 2 × Gigabit Uplink Optical Ports

Various port combinations, rate increase, installation in a concealed telecommunication box, recommended for indoor use, aesthetically pleasing design, and security

Models

Series

Highlight Features

Various port combinations, surge protection greater than 8 kV, PoE+, 16 × 10/100/1000Mbps copper ports with auto-negotiation, and 2 × Gigabit uplink fiber ports
Small size, flexible and fast installation, efficient heat dissipation, and low noise
Reliability enhancement, metal enclosure, metal Ethernet ports, independent optical transceiver design, and more stable data forwarding
Easy and effective network-wide management, ensuring high security and reliability for networks

Overview
FAQ
Documents
Specifications
Order Information

Key Specification

All-Optical Ethernet Switch RG-SF2920-16GT2SFP-P

The Ethernet architecture and novel Fiber-to-the-Room (FTTR) deployment delivers 1G fiber-to-the-room access.
This switch provides 16 × 1G Ethernet ports with auto-negotiation, 2 × 1G uplink optical ports, rich interfaces, and is PoE+ compatible, supporting full service expansion.

Ports

Dimensions

Small Size, Space Saving, Aesthetically Pleasing Design,
and No Security Concern

Flexible Installation

Heat Dissipation Design

Quietness

This compact switch comes with various mounting brackets to suit different environments.
It can be flexible installed in a concealed ELV box, in a customized cabinet or under a workbench.

The new shark fin design and die-casting enclosure increase the dissipation area by 37%.
This switch can be fit into an ELV box safely and neatly.

Fanless design, noise < 20 dB, barely perceptible to the human ear.

Enhanced Reliability, Independent Optical Transceiver Design,
and More Stable Data Forwarding

In the traditional POL optical solution, ONUs use an on-board optical transceiver design. However, there is a trade-off between the signal quality and welding reliability, resulting in a high failure rate. The Simplified Optical Ethernet solution adopts point-to-point transmission and provides a more reliable independent optical transceiver design. The high-quality signal transmission is free from external interference and data forwarding is more stable.

Managed by the INC Controller to Achieve Easy and Efficient O&M Management

The switch automatically completes registration and configuration after it accesses the all-optical network, achieving plug and play, no commissioning and fast onboarding.

You can check the link health status, handle alarms and troubleshoot faults through the INC, which dramatically improves the O&M efficiency.

A switch can be flexibly replaced based on service needs without reconfiguration. Service ports supports auto-sensing, achieving automatic O&M.

Fast Onboarding

Optical Link O&M

Zero Touch Replacement

FAQ

Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.

Ask a Question

Documents

RG-SF2920 Series Switches Datasheet

RG-SF2920 Series Switches Web-based Configuration Guide, RGOS 11.4(1)B81 (V1.0)

Ruijie RG-SF2920 Series Switches RGOS 11.4(1)B81P1 Command Reference (V1.1)

Ruijie RG-SF2920 Series Switches RGOS 11.4(1)B81P1 Configuration Guide (V1.1)

Ruijie RG-SF2920 Series Switches Hardware Installation and Reference Guide (V1.2)

Specifications

Technical Specifications	Description
Model	RG-SF2920U-4GT1MS-P	RG-SF2920U-8GT1MS	RG-SF2920U-8GT1MS-P	RG-SF2920-8GT2MG2XS	RG-SF2920-16GT2MG2XS	RG-SF2920-16GT2SFP	RG-SF2920-16GT2SFP-P	RG-SF2920-8GT2MG2XS-P	RG-SF2920-16GT2MG2XS-P
Fixed ports	4 × 10/100/1000M adaptive electrical ports, 1 × 1000M/2.5G SFP port, fixed single AC power supply; electrical ports 1–4 support PoE/PoE+; maximum PoE output power: 45 W	8 × 10/100/1000M adaptive electrical ports, 1 × 1000M/2.5G SFP optical port, fixed single AC power supply	8 × 10/100/1000M adaptive electrical ports, 1 × 1000M/2.5G SFP+ port, fixed single AC power supply; electrical ports 1–8 support PoE/PoE+; maximum PoE output power: 125 W	8 × 10/100/1000M adaptive electrical ports, 2 × 1000M/2.5G adaptive ports, 2 × 1/10G SFP+ ports, fixed single AC power supply	16 × 10/100/1000M adaptive electrical ports, 2 × 1000M/2.5G adaptive ports, 2 × 1/10G SFP+ ports, fixed single AC power supply	16 × 10/100/1000M adaptive electrical ports, 2 × 1G SFP optical ports, fixed single AC power supply	16 × 10/100/1000M adaptive electrical ports, 2 × 1G SFP ports, fixed single AC power supply; electrical ports 9–16 support PoE/PoE+; maximum PoE output power: 125 W	8 × 10/100/1000M adaptive electrical ports, 2 × 1000M/2.5G/5G adaptive electrical ports, 2 × 1/10G SFP+ ports, fixed single AC power supply; electrical ports 3–10 support PoE/PoE+; maximum PoE output power: 125 W	16 × 10/100/1000M adaptive electrical ports, 2 × 1000M/2.5G/5G adaptive electrical ports, 2 × 1/10G SFP+ ports, fixed single AC power supply; electrical ports 11-18 support PoE/PoE+; maximum PoE output power: 125 W
Switching capacity	432 Gbps/4.32 Tbps
Packet forwarding rate	78 Mpps/126 Mpps	51 Mpps/126 Mpps	51 Mpps/126 Mpps	84 Mpps/126 Mpps	92 Mpps/126 Mpps	75 Mpps/126 Mpps	75 Mpps/126 Mpps	84 Mpps/126 Mpps	92 Mpps/126 Mpps
PoE	In compliance with IEEE 802.3af (15.4 W) and IEEE 802.3at (30 W) Automatic and energy-efficient power supply management modes Warm start to implement uninterrupted power supply Port priority Scheduled power-on/off of PoE ports	Not supported	Electrical ports 1–8 support PoE/PoE+ and the maximum PoE output power is 125 W. Automatic and energy-efficient power supply management modes Warm start to implement uninterrupted power supply Port priority Scheduled power-on/off of PoE ports	Not supported	Not supported	Not supported	Electrical ports 9–16 comply with IEEE 802.3af (15.4 W) and IEEE 802.3at (30 W). Automatic and energy-efficient power supply management modes Warm start to implement uninterrupted power supply Port priority Scheduled power-on/off of PoE ports	In compliance with IEEE 802.3af (15.4 W) and IEEE 802.3at (30 W) Automatic and energy-efficient power supply management modes Warm start to implement uninterrupted power supply Port priority Scheduled power-on/off of PoE ports	In compliance with IEEE 802.3af (15.4 W) and IEEE 802.3at (30 W) Automatic and energy-efficient power supply management modes Warm start to implement uninterrupted power supply Port priority Scheduled power-on/off of PoE ports
MAC address table	Static MAC addresses MAC address filtering
802.1Q VLAN	The following items are supported: 4094 IEEE 802.1Q VLANs Port-based VLAN			The following items are supported: 4094 IEEE 802.1Q VLANs Port-based VLAN MAC-based VLAN Private VLAN Protocol-based VLAN GVRP Voice VLAN
QinQ				Basic QinQ Flexible QinQ
L2 ring network technology				In compliance with the G.8032 international standard ring network protocol ERPS, switching time ≤ 50 ms, well compatible with other products that support this protocol
Link aggregation				Load balancing LACP dynamic aggregation The LACP priority, negotiation mode, and maximum number of ports that can be aggregated can be configured. Cross-VSU AP
Mirroring				Common service ports and aggregate ports can be used as the source and destination ports of SPAN. Flow- and VLAN-based SPAN One-to-one mirroring, one-to-many mirroring, many-to-one mirroring, RSPAN, ERSPAN Cross-device traffic mirroring
DHCP	The following are supported: DHCP client DHCP snooping			The following are supported: DHCP server DHCP client DHCP snooping DHCP relay
IP routing				Static black hole routing, RIP, RIPng, OSPF, and OSPFv3
ACL				Standard IP ACLs (IP-based hardware ACLs) Extended IP ACLs (hardware ACLs based on IP addresses or TCP/UDP port IDs) MAC-based extended ACLs (hardware ACLs based on source MAC addresses, destination MAC addresses, and optional Ethernet type) Time-based ACLs ACL 80 IPv6 ACLs Global ACLs ACL redirection
QoS				The following are supported: Port traffic identification Port traffic rate limiting 802.1p/DSCP/ToS traffic classification Eight priority queues per port SP, WRR, DRR, SP+WFQ, SP+WRR, SP+DRR, RED/WRED queue scheduling mechanisms
Security features	Filtering of invalid MAC addresses Broadcast storm suppression Password protection CPP Port protection			Filtering of invalid MAC addresses Broadcast storm suppression Hierarchical management of administrators and password protection RADIUS and TACACS+ SSH and SSH V2.0 BPDU guard CPP, NFPP Port protection
EEE	APD port sleeping			EEE in compliance with IEEE 802.3az: When EEE is enabled, power consumption of ports is significantly reduced.
Management features	CLI-based configuration and management not required, visualized Web management IoT MQTT Syslog/Debug, NTP/SNTP			SNMP, CLI (telnet/console), RMON, SSH, syslog/debug, NTP/SNTP, FTP, TFTP, Web, RLDP
Size (W × D × H) (mm)	200 × 170 × 55	200 × 170 × 43.6	200 × 170 × 55	210 × 235 × 55	210 × 235 × 55	210 × 235 × 55	210 × 235 × 55	210 × 250 × 55	210 × 250 × 55
Power supply	AC input: Rated voltage range: 200 V to 240 V Maximum voltage range: 180 V to 264 V Frequency: 50 Hz to 60 Hz HVDC input:			AC input: Rated voltage range: 200 V to 240 V Maximum voltage range: 180 V to 264 V Frequency: 50 Hz to 60 Hz HVDC input:
Fan	Fanless design, natural heat dissipation			Fanless design, natural heat dissipation
Temperature	Operating temperature: 0°C to 45°C Storage temperature: –40°C to 70°C
Humidity	Operating humidity: 5% to 95% RH Storage humidity: 5% to 95% RH

Order Information

Model	Description
RG-SF2920U-4GT1MS-P	4 × 10/100/1000M adaptive electrical ports, 1 × 1G SFP port, fixed single AC power supply; electrical ports 1–4 support PoE/PoE+; maximum PoE output power: 45 W
RG-SF2920U-8GT1MS	8 × 10/100/1000M adaptive electrical ports, 1 × 1G SFP port, fixed single AC power supply
RG-SF2920-16GT2SFP	16 × 10/100/1000M adaptive electrical ports, 2 × 1G SFP ports, fixed single AC power supply
RG-SF2920-8GT2MG2XS	8 × 10/100/1000M adaptive electrical ports, 2 × 1000M/2.5G adaptive ports, 2 × 1/10G SFP+ ports, fixed single AC power supply
RG-SF2920-16GT2MG2XS	16 × 10/100/1000M adaptive electrical ports, 2 × 1000M/2.5G adaptive ports, 2 × 1/10G SFP+ ports, fixed single AC power supply
RG-SF2920U-8GT1MS-P	8 × 10/100/1000M adaptive electrical ports, 1 × 1G SFP port, fixed single AC power supply; electrical ports 1–8 support PoE/PoE+; maximum PoE output power: 125 W
RG-SF2920-16GT2SFP-P	16 × 10/100/1000M adaptive electrical ports, 2 × 1G SFP ports, fixed single AC power supply; electrical ports 9–16 support PoE/PoE+; maximum PoE output power: 125 W
RG-SF2920-8GT2MG2XS-P	8 × 10/100/1000M adaptive electrical ports, 2 × 1000M/2.5G/5G adaptive electrical ports, 2 × 1/10G SFP+ ports, fixed single AC power supply; electrical ports 3–10 support PoE/PoE+; maximum PoE output power: 125 W
RG-SF2920-16GT2MG2XS-P	16 × 10/100/1000M adaptive electrical ports, 2 × 1000M/2.5G/5G adaptive electrical ports, 2 × 1/10G SFP+ ports, fixed single AC power supply; electrical ports 11-18 support PoE/PoE+; maximum PoE output power: 125 W

"*" indicates that it will be supported in the future.