Compare Products
Hide
VS
RDMA-capable high-density 25GE/100GE access switch for data center networks with low latency and no packet drop
Models
Series
Highlight Features
System Specifications |
RG-S6510-48VS8CQ |
||
Ports |
48 × 25GE ports and 8 × 100GE ports |
||
Expansion Module Slots |
Power module slots Fan module slots |
||
Management Port |
One management port, one console port, and one USB port, compliant with the USB2.0 standard |
||
Switching Capacity |
4.0Tbps |
||
Packet Forwarding Rate |
2000 Mpps |
||
802.1Q VLAN |
4094 |
||
Dimensions and Weight |
RG-S6510-48VS8CQ |
||
Dimensions (W × D × H) |
442 mm × 387 mm × 44 mm, 1 RU |
||
Weight |
About 8 kg (including two power supply modules and four fan modules) |
||
Power Supply and Consumption |
RG-S6510-48VS8CQ |
||
AC |
Rated voltage range: 100 VAC to 240 VAC Maximum voltage range: 90 VAC to 264 VAC Frequency: 50 Hz to 60 Hz Rated input current range: 3.5 A to 7.2 A |
||
High-voltage DC |
Input voltage range: 192 VDC to 288 VDC Input current: 3.6 A |
||
Low-voltage DC |
Input voltage range: –42 VDC to –72 VDC Rated input voltage: –48 VDC Rated input current: 23 A |
||
Maximum Power Consumption |
< 300 W |
||
Environment and Reliability |
RG-S6510-48VS8CQ |
||
Operating Temperature |
0°C to 45°C |
||
Operating Humidity |
10%–90% RH (Non-condensing) |
Software Specifications |
RG-S6510-48VS8CQ |
|
L2 Protocols |
IEEE802.3ad (Link Aggregation Control Protocol), IEEE802.1p, IEEE802.1Q, IEEE802.1D (STP), IEEE802.1w (RSTP), IEEE802.1s (MSTP), IGMP Snooping, MLD Snooping, Jumbo Frame (9 KB), IEEE802.1ad (QinQ and Selective QinQ), GVRP |
|
L3 Protocols (IPv4) |
BGP4, OSPFv2, RIPv1, RIPv2, MBGP, LPM Routing, Policy-based Routing (PBR), Route-policy, Equal-Cost Multi-Path Routing (ECMP), WCMP, VRRP, IGMP v1/v2/v3, DVMRP, PIM-SSM/SM/DM, MSDP, Any-RP |
|
IPv6 Basic Protocols |
Neighbor Discovery, ICMPv6, Path MTU Discovery, DNSv6, DHCPv6, ICMPv6, ICMPv6 redirection, ACLv6, TCP/UDP for IPv6, SNMP v6, Ping/Traceroute v6, IPv6 RADIUS, Telnet/SSH v6, FTP/TFTP v6, NTP v6, IPv6 MIB support for SNMP, VRRP for IPv6, IPv6 QoS |
|
IPv6 Features |
Static routing, ECMP, PBR, OSPFv3, RIPng, BGP4+, MLDv1/v2, PIM-SMv6, manual tunnel, automatic tunnel, IPv4 over IPv6 tunnel, and ISATAP tunnel |
|
Data Center Features |
VXLAN routing and VXLAN bridging IPv6 VXLAN over IPv4 and EVPN VXLAN PFC, ECN, and RDMA M-LAG OpenFlow 1.3 |
|
Visualization |
gRPC sFLOW sampling INT |
|
QoS |
Mapping of IEEE 802.1p, DSCP, and ToS priorities |
|
Virtualization |
Virtual Switching Unit |
|
Cache Management |
Cache status monitoring and management, and identification of burst traffic |
|
HA Design |
GR for RIP/OSPF/BGP, BFD, DLDP, REUP dual-link fast switching, RLDP unidirectional link detection, 1+1 power redundancy and fan redundancy, and hot swapping for all cards and power supply modules |
|
Security Features |
Network Foundation Protection Policy (NFPP), CPP, DDoS attack defense, illegitimate data packet detection, data encryption, source IP spoofing prevention, IP scanning prevention, RADIUS/TACACS, IPv4/v6 packet filtering by basic ACL, extended ACL or VLAN-based ACL, plaintext-based and MD5 ciphertext-based authentication for OSPF, RIPv2, and BGPv4 packets, telnet login and password mechanisms for restricted IP addresses, uRPF, broadcast packet suppression, DHCP Snooping, ARP spoofing prevention, ARP check, and hierarchical user management |
|
Management Mode |
SNMP v1/v2/v3, Netconf, telnet, console, MGMT, RMON, SSHv1/v2, FTP/TFTP, NTP clock, Syslog, SPAN/RSPAN/ERSPAN, Telemetry, ZTP, Python, fan and power alarm, and temperature alarm |
|
Other Protocols |
DHCP Client, DHCP Relay, DHCP Server, DNS Client, UDP relay, ARP Proxy, and Syslog |
Product Model |
Description |
RG-S6510-48VS8CQ |
48 × 25GE ports and 8 × 100GE ports. |
RG-S6510-32CQ |
Provides 32 × 100G ports. |
Product Model |
Description |
RG-PA550I-F |
550 W power supply module (AC and 240 V HVDC) |
RG-PD800I-F |
800 W power supply module (48 V LVDC), applicable only to RG-S6510-48VS8CQ |
M6510-FAN-F |
Fan module of RG-S6510-48VS8CQ, supporting 3+1 redundancy, hot swapping, and front-to-rear ventilation design. |
M1HFAN I-F |
Fan module of RG-S6510-32CQ, supporting 4+1 redundancy, hot swapping, and front-to-rear ventilation design. |
Product Model |
Description |
100G-QSFP-SR-MM850 |
100GE SR optical transceiver, QSFP28 package, MPO connector (850 nm wavelength) |
100G-QSFP-LR4-SM1310 |
100GE LR single-mode optical transceiver, QSFP28 package, LC connector (used in combination with LC optical fibers, 2-core, 1310 nm wavelength), maximum transmission distance of 10 km |
100G-QSFP-iLR4-SM1310 |
100GE iLR optical transceiver, QSFP28 package, LC connector (used in combination with LC optical fibers, 2-core, 1310 nm wavelength), maximum transmission distance of 2 km |
100G-AOC-10M |
100GE QSFP28 port cable (including modules at both ends), with a length of 10 m |
40G-QSFP-SR-MM850 |
40GE SR optical transceiver, QSFP+ package, MPO connector (used in combination with OM3/OM4 MPO optical fibers, 8-core/12-core, 850 nm wavelength) |
40G-QSFP-LR4-SM1310 |
40GE LR single-mode optical transceiver, QSFP+ package, LC connector (used in combination with LC optical fibers, 2-core, 1310 nm wavelength), maximum transmission distance of 10 km |
40G-QSFP-LSR-MM850 |
40GE SR optical transceiver, QSFP+ package, MPO connector (used in combination with OM3/OM4 MPO optical fibers, 8-core/12-core, 850 nm wavelength) |
VG-SFP-AOC5M |
25GE SFP28 optical cable (including modules on both sides), 5 m |
XG-SFP-SR-MM850 |
10GE SR optical transceiver (300 m), applicable to SFP+ ports |
XG-SFP-LR-SM1310 |
10GE LR optical transceiver (10 km), applicable to SFP+ ports |
XG-SFP-ER-SM1550 |
10GE ER optical transceiver (40 km), applicable to SFP+ ports |
XG-SFP-ZR-SM1550 |
10GE ZR optical transceiver (80 km), applicable to SFP+ ports |
Ruijie Networks websites use cookies to deliver and improve the website experience.
See our cookie policy for further details on how we use cookies and how to change your cookie settings.
Cookie Manager
When you visit any website, the website will store or retrieve the information on your browser. This process is mostly in the form of cookies. Such information may involve your personal information, preferences or equipment, and is mainly used to enable the website to provide services in accordance with your expectations. Such information usually does not directly identify your personal information, but it can provide you with a more personalized network experience. We fully respect your privacy, so you can choose not to allow certain types of cookies. You only need to click on the names of different cookie categories to learn more and change the default settings. However, blocking certain types of cookies may affect your website experience and the services we can provide you.
Through this type of cookie, we can count website visits and traffic sources in order to evaluate and improve the performance of our website. This type of cookie can also help us understand the popularity of the page and the activity of visitors on the site. All information collected by such cookies will be aggregated to ensure the anonymity of the information. If you do not allow such cookies, we will have no way of knowing when you visited our website, and we will not be able to monitor website performance.
This type of cookie is necessary for the normal operation of the website and cannot be turned off in our system. Usually, they are only set for the actions you do, which are equivalent to service requests, such as setting your privacy preferences, logging in, or filling out forms. You can set your browser to block or remind you of such cookies, but certain functions of the website will not be available. Such cookies do not store any personally identifiable information.
Contact Us
How can we help you?