24-Port GE Optical Layer 3 Enterprise-Class Core or Aggregation Switch (with Eight Combo Ports), Eight 10G Uplink Ports, RG-S5760C-24SFP/8GT8XS-X

Aggregation switch for large-sized networks, or core switch for small and medium-sized networks



Highlight Features

  • Rich port types, 24 x 1000 Mbps Ethernet ports, and eight 10G optical ports for uplink
  • Hardware redundancy, guaranteed service continuity and network connectivity
  • VSU virtualization, flexible networking and high performance
  • Layer 3 routing control, adaptive to multiple services, efficient and guaranteed data transmission
  • Network security policies, real-time monitoring, CPP and NFPP, delivering enhanced network robustness
  • SNMP, RMON, Syslog, USB log backup features, CLI, Eweb, telnet and other management modes, easy network maintenance

Key Specification

Layer 3 GE Core & Aggregation Switch S5760C-24SFP/8GT8XS-X

Aggregation switch for small and medium-sized campus networks, with eight 10G uplink optical ports for high-speed data transmission; 24 x 1000 Mbps optical ports (including eight combo ports), providing high-speed network experience for long-distance services. Core switch for small and medium-sized enterprise networks, with high scalability, efficiency, and manageability, and device-level and link-level reliabilities for stable connectivity.

Switching capacity

Forwarding rate

Hardware Redundancy, Guaranteed Service Continuity and Network Connectivity

Hardware-level Boot Redundancy

Hot-Swappable Power Modules

Two Flash chips are used to store the system boot program for hardware-level boot redundancy, avoiding device failure caused by a failed Flash chip.

VSU Virtualization, Flexible Networking and High Performance

Millisecond Failover

High Scalability

Simplified Networking

The VSU connects to peripherals through an aggregate link, realizing service switching in milliseconds upon a failure.

Layer 3 Routing Control, Adaptive to Multiple Services, Efficient and Guaranteed Data Transmission

IPv4 and IPv6 Protocols

Abundant Multicast Protocols

Static and Dynamic Routing

The hardware supports dual stack for high-speed switching, catering to the requirements of campus network transition from IPv4 protocol to IPv6 protocol, with significant improvement in address table capacity and network security.

Network Security Policies and Real-Time Monitoring, Delivering Enhanced Network Robustness



Large amounts of data from different sources are handled by CPP first to prevent direct attacks on the CPU, ensuring CPU stability under high usage, and achieving significant improvement in the device's security performance.

Managed by the INC Controller to Achieve Easy and Efficient O&M Management

The switch automatically completes registration and
configuration after it accesses the all-optical network, achieving
plug and play, no commissioning and fast onboarding.
A switch can be flexibly replaced based on service needs
without reconfiguration. Service ports supports auto-sensing,
achieving automatic O&M.

Fast Onboarding

Zero Touch Replacement


Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.









RG-S5760C- 24SFP/8GT8XS-X




Basic Features




Fixed Ports



24x 10/100/1000BASE-T, 8 x

1G/10G SFP+ ports, 2 power

module slots


24 x Gigabit SFP ports (ports 1-16 are 100M/1000M SFP ports),

8 10/100/1000BASE-T ports (combo), 8 x 1G/10G SFP+ ports, 2 power module slots



48x 10/100/1000BASE-T, 4 x

1G/10G SFP+ ports, 2 power

module slots


Management Port



1 MGMT port, 1 console port, and 1 USB port, compliant with USB2.0 standard


Expansion Slot


Single expansion slot is reserved to for service modules.


System Switching 



880 Gbps/7.92 Tbps


Forwarding Rate



426 Mpps/600 Mpps



426 Mpps/600 Mpps



406 Mpps/600 Mpps


MAC Address




ARP Table




Routing Table

Size (IPv4/IPv6)



24K (IPv4/IPv6)


Product Features







The following are supported:

4K 802.1Q VLAN

Port based VLAN Private VLAN Voice VLAN GVRP




Basic QinQ Flexible QinQ


Link Aggregation





Spanning Tree


The following are supported:










The following are supported:

DHCP Server DHCP Client DHCP Snooping DHCP Relay

IPv6 DHCP Server IPv6 DHCP Snooping IPv6 DHCP Client IPv6 DHCP Relay


Multiple Spanning Tree Protocol (MSTP) Instances






Maximum Aggregation Port (AP)





IPv6 Basic Protocol



IPv6 addressing, Neighbor Discovery (ND), ICMPv6, stateless auto-configuration, and Path MTU Discovery






IP Routing


The following are supported:

Static routing

RIP and RIPng

OSPFv2, OSPFv3, IS-ISv4, and IS-ISv6 BGP4, and BGP4+

Equivalent routing

Policy Based Routing

Packet-based load balancing, and flow-based load balancing MCE







The following are supported: IGMP v1, v2, v3, and IGMP proxy IGMP v1, v2 and v3 Snooping

IGMP filtering, and IGMP fast-leave PIM-DM, PIM-SM, and PIM-SSM

MLD Snooping, and MLD PIM for IPv6





























The following flexible and diversified hardware ACLs are supported: Standard IP ACLs (IP-based hardware ACL)

Extended IP ACLs (hardware ACLs based on IP addresses or TCP/UDP port IDs)

MAC-based extended ACLs (hardware ACLs based on source MAC addresses, destination MAC addresses, and optional Ethernet type) Time-based ACLs

Expert-level ACLs (hardware ACLs based on flexible combinations of Ethernet type, MAC address, IP address, TCP/UDP port ID, protocol type, and time)








The following are supported:

Port traffic identification Port traffic rate limiting

802.1p/DSCP/ToS traffic classification

Eight priority queues per port

SP, DRR, SP+DRR, RED/WRED queue scheduling mechanisms












The following are supported:

3-tuple binding (IP address, MAC address, and port)

3-tuple binding (IPv6 address, MAC address, and port) Filtering of invalid MAC addresses

Port- and MAC-based 802.1x authentication MAB authentication

Portal authentication and Portal 2.0 authentication ARP-check


ARP packet rate limiting

Gateway ARP spoofing prevention Broadcast storm suppression

Hierarchical management of administrators and password protection RADIUS and TACACS+







AAA for device login management SSH

BPDU Guard

IP Source Guard CPP, and NFPP

Port protection



Management Features


SNMP, CLI (Telnet/Console), RMON, SSH, Syslog, NTP/SNTP, SNMP over IPv6, IPv6 MIB support for SNMP, SSHv6, Telnet v6, FTP/TFTP v6, DNS v6, NTP for v6, and Traceroute v6

This switch supports sFlow, and samples its traffic information by using the random sampling technology of data flows.




High Reliability


The following are supported:

VSU (virtualization technology, which virtualizes multiple devices into one), GR for RIP/OSPF/BGP and other routing protocols, BFD detection, ERPS (G.8032), REUP, RLDP, power supply 1+1 backup, and the hot- swappable function supported on the power supply






CPE WAN Management Protocol (CWMP(TR069))








Physical Features


Dimensions (W

× D × H)



442 mm × 340 mm × 44 mm


Rack Height




MTBF (hours)







Power Supply


AC input:

Rated voltage range: 100 V to 240 V Maximum voltage range: 90 V to 264 V Frequency: 50/60 Hz

HVDC input:

Rated voltage range: 240 V

Maximum voltage range: 192 V to 288 V


Power Consumption (full load)



60 W



77 W



70 W





2 built-in fans

Fan speed regulating and alarm function











Operating temperature: 0oC to 45oC(without an expansion card), 0oC to 40oC (with an expansion card) Storage temperature: -40oC to 70oC





Operating humidity: 5% to 95%(no condensation) Storage humidity: 5% to 95%






500m to 5,000m


Lightening Protection on Communication Port




6kV (Common Mode)


Lightning Protection on Power Port




Common Mode 6KV/Differential Mode 6KV



Order Information




24 x 10/100/1000BASE-T, 8 x 1G/10G SFP+ ports, reserved expansion slots, 2 built-in fixed fans, 2 power module slots (at least 1 RG-PA150IB-F power modules needed)


48 x 10/100/1000BASE-T, 4 x 1G/10G SFP+ ports, reserved expansion slots, 2 built-in fixed fans, 2 power module slots (at least 1 RG-PA150IB-F power modules needed)


24 x 1000M SFP ports (ports 1-16 are 100M/1000M SFP ports), 8 x 10/100/1000BASE-T ports (combo), 8 x 1G/10G SFP+ ports, reserved expansion slots, 2 built-in fixed fans, 2 power module slots (at least 1 RG-PA150IB-F power modules needed)


150W AC power module


1000BASE-TX, SFP Transceiver (100m)


1000BASE-SX, SFP Transceiver, SM (850nm, 500m, LC).


1000BASE-LX, SFP Transceiver, SM (1310nm, 10km, LC)


1000BASE-LH, SFP Transceiver, SM (1310nm, 40km, LC)


1000BASE-ZX50, SFP Transceiver, SM (1550nm, 50km, LC)


1000BASE-ZX80, SFP Transceiver, SM (1550nm, 80km, LC)


1000BASE-ZX100, SFP Transceiver, SM (1550nm, 100km, LC).


10GBASE-SR, SFP+ Transceiver, MM (850nm, 300m, LC)


10GBASE-SR, SFP+ Transceiver (1310nm, 10km, LC)


10GBASE-SR, SFP+ Transceiver (1550nm, 40km, LC)


10GBASE SFP+ Optical Stack Cable (included both side transceivers) , 1 Meter


10GBASE SFP+ Optical Stack Cable (included both side transceivers) , 3 Meters


10GBASE SFP+ Optical Stack Cable (included both side transceivers) , 5 Meters



Ruijie Networks websites use cookies to deliver and improve the website experience.

See our cookie policy for further details on how we use cookies and how to change your cookie settings.

Cookie Manager

When you visit any website, the website will store or retrieve the information on your browser. This process is mostly in the form of cookies. Such information may involve your personal information, preferences or equipment, and is mainly used to enable the website to provide services in accordance with your expectations. Such information usually does not directly identify your personal information, but it can provide you with a more personalized network experience. We fully respect your privacy, so you can choose not to allow certain types of cookies. You only need to click on the names of different cookie categories to learn more and change the default settings. However, blocking certain types of cookies may affect your website experience and the services we can provide you.

  • Performance cookies

    Through this type of cookie, we can count website visits and traffic sources in order to evaluate and improve the performance of our website. This type of cookie can also help us understand the popularity of the page and the activity of visitors on the site. All information collected by such cookies will be aggregated to ensure the anonymity of the information. If you do not allow such cookies, we will have no way of knowing when you visited our website, and we will not be able to monitor website performance.

  • Essential cookies

    This type of cookie is necessary for the normal operation of the website and cannot be turned off in our system. Usually, they are only set for the actions you do, which are equivalent to service requests, such as setting your privacy preferences, logging in, or filling out forms. You can set your browser to block or remind you of such cookies, but certain functions of the website will not be available. Such cookies do not store any personally identifiable information.

Accept All

View Cookie Policy Details

Contact Us

Contact Us

How can we help you?

Contact Us

Get an Order help

Contact Us

Get a tech support