Picture

RG-CS88-08 Ruijie 10 RU Modular High-Performance Core Switch with Cloud Management

Fit for data center, MAN, campus, and integrated data center and campus scenarios

Models

RG-CS88-08

6 x line card slots, 10 RU

Series

RG-CS83 Series RG-CS83-PD series RG-CS85 Series RG-CS86 Series Full 10GE Switch RG-CS86 Series Multi-GE Switch RG-CS88 Series RG-S2915-L Series

Datasheet Sales Enquiry

Highlight Features

10 RU compact size, saving space
Up to 288 10GE ports on high-density 10GE cards
40GE and 100GE ports, achieving high speed
Security defense policies, ensuring network robustness
Hardware-level multi-protection, delivering carrier-grade reliability
Cloud, Make Your Business Easy

Key Specifications
Features
Specifications
Resources
Order Information
FAQ

Sales Enquiry

Key Specifications View More

Features

Cloud Managed Modular Core Switch RG-CS88-08

10 RU compact size, saving cabinet space,high-density 1G/10G/40G/100G line cards support up to 288 10GE ports. Only one line card is required to meet networking requirements at the small- or medium-sized network core or medium-sized network aggregation layer.

Security Defense Policies, Ensuring Network Robustness

CPP

NFPP

CPU Protection Policy (CPP) controls the types and traffic of packets sent to the CPU, preventing CPU usage exceptions.

Hardware-Level Multi-Protection, Delivering Carrier-Grade Reliability

Dual-Boot Backup

Two flash chips for storing boot software achieve hardware-level boot
redundancy, avoiding switch boot failures due to a flash chip fault.

1+1 Supervisor
Module Redundancy

1+1 hot standby ensures nonstop switch services.

1+1 Supervisor
Module Redundancy

1+1 hot standby ensures nonstop switch services.

N+M Power Supply Redundancy

Two flash chips for storing boot software achieve hardware-level boot
redundancy, avoiding switch boot failures due to a flash chip fault.

1+1 Fan Redundancy

Two axial flow fans for factory delivery support 256-level speed regulation
and precise temperature control, reducing energy consumption and noise.

1+1 Fan Redundancy

Two axial flow fans for factory delivery support 256-level speed regulation
and precise temperature control, reducing energy consumption and noise.

Cloud, Make Your Business Easy

Automatic device registration and configuration after device connection
Plug and play without commissioning, fast provisioning

Flexible replacement with no need of reconfiguration
Auto-sensing on ports, facilitating automatic O&M

Specifications

Hardware Specifications

Hardware Specifications	RG-CS88-08
Interface Specifications
Power module	2
Supervisor module slots	2
Line card slot	6
Switch fabric module slot	2 (integrated with supervisor modules)
System Specifications
Switching capacity	9.6 Tbps
Packet forwarding rate	7200 Mpps
MAC address table size	● Number of global MAC addresses CM88-48GT-H, CM88-48SFP-H: 80,000 CM88-8CQ-H, CM88-48XS-H: 96,000 ● Number of static MAC addresses CM88-48GT-H, CM88-48SFP-H: 4,000 CM88-8CQ-H, CM88-48XS-H: 40,000
ARP table size	CM88-48GT-H, CM88-48SFP-H: underlay: 30,000; overlay: 0 CM88-8CQ-H, CM88-48XS-H: underlay: 50,000; overlay: 0 (default and recommended)
Number of IPv4 unicast routes	CM88-48GT-H, CM88-48SFP-H: 12,000 (default and recommended, shared with IPv6 routes) CM88-8CQ-H, CM88-48XS-H: 134,000 (default and recommended, shared with IPv6 routes)
Number of IPv4 multicast routes	CM88-48GT-H, CM88-48SFP-H: 8,000 CM88-8CQ-H, CM88-48XS-H: 16,000
Number of IPv6 unicast routes	CM88-48GT-H, CM88-48SFP-H: 6,000 (shared with IPv4 routes) CM88-8CQ-H, CM88-48XS-H: 50,000 (shared with IPv4 routes)
Number of IPv6 multicast routes	CM88-48GT-H, CM88-48SFP-H: 4,000 CM88-8CQ-H, CM88-48XS-H: 8,000
Number of ACEs	● Ingress CM88-48GT-H, CM88-48SFP-H: 5,000 CM88-8CQ-H, CM88-48XS-H: 4,500 ● Egress CM88-48GT-H, CM88-48SFP-H: 1,000 CM88-8CQ-H, CM88-48XS-H: 2,000
Dimensions and Weight
Dimensions (W x D x H)	442 mm x 465mm x 441.7 mm (17.40 in. x 18.31 in. x 17.39 in.), 10 RU
Weight (empty chassis and fan modules)	35.6 kg (78.48 lbs)
CPU and Storage
CPU	● Supervisor module CM88-CM: 1.5 GHz quad-core processor ● Service module 1.5 GHz quad-core processor
Flash memory	● Supervisor module: CM88-CM: 8 GB ● Service module: 8 GB
SDRAM	● Supervisor module: CM88-CM: DDR4 4 GB ● Service module: DDR4 2 GB
Data packet buffer	● Supervisor module: CM88-CM: DDR4 4GB ● Line Card: 32 MB
Power and Consumption
Maximum power consumption	● Chassis RG-CS88: < 176 W ● Supervisor module: CM88-CM: < 50 W ● Service module: CM88-48GT-H: < 75 W CM88-48SFP-H: < 95 W CM88-48XS-H: < 160 W CM88-8CQ-H: < 130 W
Maximum output power	● RG-PA600I-F: 600 W ● RG-PA1600I-F: 90 V AC to 180 V AC power:12,00 W;180 V AC to 264 V AC power: 1,600 W
Environment and Reliability
MTBF	> 200,000 hours
Primary Airflow	● Supervisor module /Service module Right-to-rear airflow ● System power module Front-to-rear airflow
Operating temperature	0°C to 45°C (32°F to 113°F)
Storage temperature	–40°C to +70°C (–40°F to +158°F)
Operating humidity	10% to 90% RH (non-condensing)
Storage humidity	5% to 95% RH (non-condensing)
Operating altitude	–500 m to +5,000 m (–1640.42 ft. to +16404.20 ft.)
Operating noise	55.9 dB at the temperature of 27°C (80.6°F) 73.4 dB at the temperature of 45°C (113°F)
Interface surge protection	Power port: 6 kV Telecom port: 4 kV (MGMT port)

Software Specifications

RG-CS88 Series
Feature	Description
Ethernet Switching	Jumbo frame (maximum length: 9216 bytes)
	802.3az EEE
	Maximum number of VLANs that can be created: 4,094
	Super VLAN, Private VLAN
	MAC address-based, port-based, protocol-based, and IP subnet-based VLAN assignment
	GVRP
	Basic QinQ and selective QinQ
	STP (IEEE 802.1.d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)
	ERPS (G.8032)
	LLDP/LLDP-MED
MPLS	MPLS IPv6
	MPLS L3VPN
	MPLS 6VPE
	MPLS MIB (RFC 1273, RFC 4265, and RFC 4382)
IP Service	Static and dynamic ARP
	DHCP client
	DHCP relay
	DHCP server
	DHCP snooping
	DNS
	DHCPv6 client, DHCPv6 relay, and DHCPv6 snooping
	GRE tunnel
	Manual tunnel, automatic tunnel, and ISATAP tunnel for IPv6
	Neighbor Discovery (ND) and ND snooping
IP Routing	Static routing
	RIP and RIPng
	OSPFv2 and OSPFv3
	IPv4/IPv6 IS-IS
	BGP4 and BGP4+
	IPv4/IPv6 VRF
	Policy-based routing (PBR)
	GR
	EVPN
Multicast	IGMP v1/v2/v3
	IGMP proxy
	IGMP snooping v1/v2/v3
	IGMP fast leave
	PIM-DM, PIM-SM, and PIM-SSM
	PIM-SSM for IPv4 and IPv6
	MSDP to achieve inter-domain multicast
	MLDv1 and MLDv2
	MLD v1/v2 snooping
	Multicast static routing
	Multicast source IP address check Multicast source port check
	PIM-SMv6
ACL and QoS	Standard IP ACLs (hardware ACLs based on IP addresses)
	Extended IP ACLs (hardware ACLs based on IP addresses or TCP/UDP port numbers)
	Extended MAC ACLs (hardware ACLs based on source MAC addresses, destination MAC addresses, and optional Ethernet type)
	Expert-level ACLs (hardware ACLs based on flexible combinations of the VLAN ID, Ethernet type, MAC address, IP address, TCP/UDP port number, protocol type, and time range)
	ACL80 and IPv6 ACL
	Applying ACLs globally (hardware ACLs based on flexible combinations of the VLAN ID, Ethernet type, MAC address, IP address, TCP/UDP port number, protocol type, and time range)
	ACL redirection
	Port traffic identification
	Port traffic rate limiting
	802.1p
	Traffic classification based on 802.1p priorities, DSCP priorities, and IP precedences
	Congestion management: SP, WRR, DRR, WFQ, SP+WRR, SP+DRR, and SP+WFQ
	Congestion avoidance: tail drop, RED, and WRED
	CAR
	Eight priority queues per port
Security	AAA
	RADIUS authorization and accounting
	TACACS+
	Portal authentication, RADIUS, and TACACS+ login authentication
	IEEE802.1X authentication, MAC address bypass (MAB) authentication, and interface-based and MAC address-based 802.1X authentication
	Web authentication
	Hypertext Transfer Protocol Secure (HTTPS)
	SSHv1 and SSHv2
	Global IP-MAC binding
	ICMP
	Port security
	IP source guard
	DAI
	SAVI
	ARP spoofing prevention
	CPU Protect Policy (CPP) and NFPP
	Various attack defense functions, including NFPP and ARP anti-attack
	uRPF
	Login authentication and password security
	Unknown multicast packets are not sent to the CPU, and unknown unicast packets can be suppressed.
Reliability	Rapid Ethernet Uplink Protection (REUP)
	Rapid Link Detection Protocol (RLDP), Layer 2 link connectivity detection, unidirectional link detection, and VLAN-based loop control
	Data Link Detection Protocol (DLDP)
	IPv4 VRRP v2/v3 and IPv6 VRRP
	VRRP for the super-VLAN
	BFD
	1+1 redundancy for supervisor modules and fan modules, and N+M redundancy for power modules
	Hot swapping of components
	Hot patch and online installation of patches
	GR for OSPF/IS-IS/BGP
	BFD for VRRP/OSPF/BGP4/ISIS/ISISv6/static routing
NMS and maintenance	SPAN, RSPAN, and ERSPAN
	sFLOW
	NTP
	SNTP
	FTP and TFTP
	SNMP v1/v2/v3
	RMON (1, 2, 3, 9)
	NETCONF
	CWMP
	gRPC
	Cloud and SON
	Console/AUX Modem/Telnet/SSH2.0 CLI configuration
	Fault alarm and auto-recovery
	System operation logging

Resources All Resources

Learn about Products or Solutions

Product Datasheet

Installation

Installation Guide

Software and Configuration

Order Information

1. Switch and Supervisor Engine

Select the switch and supervisor engine based on the specific product model.

Model	Description
RG-CS88 switches and supervisor engines
RG-CS88-08	RG-CS88-08 switch, which can accommodate 6 service cards and 2 supervisor engines, and with 2 fans (Purchase at least one RG-PA600I-F/RG-PA1600I-F module.)
CM88-CM	CM88-CM new generation of high-performance engine.

2. Power Modules and Fans

Select the power module based on power supply requirements. Note that at least one power module must be selected.

Model	Description
RG-PA600I-F	Power module (support redundancy, AC, 600W)
RG-PA1600I-F	Power module (support redundancy, AC, 1600W)
M08-FAN	CS88-08 fan: Each M08-FAN tray consists of two fan modules and one fan monitoring card. It blows air to the outside for convection. (This is a default configuration for the switches.)

3. Line Cards

Select the line card based on service requirements. Before ordering a line card, please contact the online customer service personnel for the details about the line card.

Model	Description
Commercial-grade line cards
CM88-48XS-H	48 × 10GE optical ports (SFP+ and LC)
CM88-8CQ-H	8 × 100G Ethernet optical ports (QSFP28 and LC)
CM88-48GT-H	48 × GE electrical ports (RJ45)
CM88-48SFP-H	48 × GE optical ports (SFP+ and LC)

"*" indicates that it will be supported in the future.

FAQ Ask a Question

Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.

RG-CS88-08 Ruijie 10 RU Modular High-Performance Core Switch with Cloud Management

Cloud Managed Modular Core Switch RG-CS88-08

10 RU compact size, saving cabinet space,high-density 1G/10G/40G/100G line cards support up to 288 10GE ports. Only one line card is required to meet networking requirements at the small- or medium-sized network core or medium-sized network aggregation layer.

Security Defense Policies, Ensuring Network Robustness

CPP

NFPP

Hardware-Level Multi-Protection, Delivering Carrier-Grade Reliability

Dual-Boot Backup

Two flash chips for storing boot software achieve hardware-level bootredundancy, avoiding switch boot failures due to a flash chip fault.

1+1 SupervisorModule Redundancy

1+1 hot standby ensures nonstop switch services.

1+1 SupervisorModule Redundancy

1+1 hot standby ensures nonstop switch services.

N+M Power Supply Redundancy

Two flash chips for storing boot software achieve hardware-level bootredundancy, avoiding switch boot failures due to a flash chip fault.

1+1 Fan Redundancy

Two axial flow fans for factory delivery support 256-level speed regulationand precise temperature control, reducing energy consumption and noise.

1+1 Fan Redundancy

Two axial flow fans for factory delivery support 256-level speed regulationand precise temperature control, reducing energy consumption and noise.

Cloud, Make Your Business Easy

Hardware Specifications

Software Specifications

Two flash chips for storing boot software achieve hardware-level boot
redundancy, avoiding switch boot failures due to a flash chip fault.

1+1 Supervisor
Module Redundancy

1+1 Supervisor
Module Redundancy

Two flash chips for storing boot software achieve hardware-level boot
redundancy, avoiding switch boot failures due to a flash chip fault.

Two axial flow fans for factory delivery support 256-level speed regulation
and precise temperature control, reducing energy consumption and noise.

Two axial flow fans for factory delivery support 256-level speed regulation
and precise temperature control, reducing energy consumption and noise.