Full Gigabit Ethernet Access Switch for Large-sized Networks
Models
Series
Highlight Features
Model | RG-S5300-24GT4XS-E | RG-S5300-48GT4XS-E | RG-S5310-24GT4XS-P-E | RG-S5310-48GT4XS-P-E |
Basic Features | ||||
Fixed Ports | 24 x 10/100/1000M adaptive electrical ports, 4 x 1G/10G SFP+ ports | 48 x 10/100/1000M adaptive electrical ports, 4 x 1G/10G SFP+ ports | 24 x 10/100/1000BASE-T support PoE+, 4 x 1G/10G SFP+ ports | 48 x 10/100/1000BASE-T support PoE+, 4 x 1G/10G SFP+ ports |
Power Slot | NA | NA | 2 | 2 |
Switching Capacity | 336 Gbps/3.36 Tbps | 432 Gbps/4.32 Tbps | 336Gbps/3.36Tbps | 432Gbps/4.32Tbps |
Forwarding Rate
|
96Mpps/126Mpps | 132Mppss/166Mpps | 96Mpps/126Mpps | 132Mppss/166Mpps |
MAC Address | 32K | |||
ARP Table | 2000 | 4000 | ||
Routing Table Size (IPv4/IPv6) | 4000 (IPv4/IPv6) | |||
ACL Entries | In: 3,500 Out: 1,500 |
|||
Software Features | ||||
802.1Q VLAN | 4K 802.1Q VLAN Port-based VLAN MAC-based VLAN Private VLAN Voice VLAN GVRP |
|||
QinQ | Basic QinQ Flexible QinQ |
|||
ACL | Standard IP ACLs (IP-based hardware ACLs) Extended IP ACLs (hardware ACLs based on IP addresses or TCP/UDP port IDs) MAC-based extended ACLs (hardware ACLs based on source MAC addresses, destination MAC addresses, and optional Ethernet type) Time-based ACLs Expert-level ACLs (hardware ACLs based on flexible combinations of the VLAN ID, Ethernet type, MAC address, IP address, TCP/UDP port ID, protocol type, and time) ACL 80 IPv6 ACLs Global ACLs ACL redirection |
|||
QoS | Port traffic identification Port traffic rate limiting 802.1p/DSCP/ToS traffic classification Eight priority queues per port SP, WRR, SP+WRR, RED/WRED queue scheduling mechanisms |
|||
Mirror | One-to-one mirroring, many-to-one mirroring, and one-to-many mirroring RSPAN Flow-based local and remote mirroring |
|||
DHCP | DHCP server DHCP client DHCP snooping DHCP relay IPv6 DHCP snooping IPv6 DHCP client IPv6 DHCP relay |
|||
Multiple Spanning Tree Protocol (MSTP) Instances | 65 | |||
Maximum Aggregation Port (AP) | 128 (max. 8 ports per group) | |||
Security Features | The following are supported: 3-tuple binding (IP address, MAC address, and port) 3-tuple binding (IPv6 address, MAC address, and port) Filtering of invalid MAC addresses Port- and MAC-based 802.1x authentication MAB authentication Portal authentication and Portal 2.0 authentication ARP-check DAI ARP packet rate limiting Gateway ARP spoofing prevention Broadcast storm suppression Hierarchical management of administrators and password protection RADIUS and TACACS+ AAA (IPv4/IPv6) for device login management SSH and SSH V2.0 BPDU guard IP source guard CPP, NFPP Port protection |
|||
ERPS | G.8032 v1/v2, Sing-ring, Tangent-ring, Intersecting-ring, Load balancing, compatible with products of this protocol. | |||
PoE | NA | IEEE 802.3at/802.3af | ||
IP Routing | IPv4/IPv6 static routing RIPv1 & RIPv2, RIPng, OSPFv2, OSPFv3, BGP, and ISIS Routing policy, MLD Snooping |
|||
IPv6 | IPv6 addressing, Neighbor Discovery (ND), ICMPv6, IPv6 ping, IPv6 Tracert, and IPv6 multicast | |||
VSU Features | 4 | |||
Zero Configuration | CPE WAN Management Protocol (CWMP(TR069)) | |||
Management Features | SNMPv1/v2c/v3, CLI(Telnet/Console), RMON(1, 2, 3, 9), SSH, Syslog, NTP/SNTP, Web, CLI(Telnet/Console), RMON, SSH, Syslog/Debug, NTP/SNTP, FTP, TFTP, Web, and sFLOW | |||
Physical Features | ||||
Dimensions (W × D × H) | 442 mm × 420 mm × 43.6 mm | |||
Rack Height | 1RU | |||
MTBF (hours) | >200K | |||
Power Supply | Single fixed power supply AC input: Rated voltage range: 100 V to 240 V Maximum voltage range: 90 V to 264 V Frequency: 50/60 Hz |
Dual power supply AC input: Rated voltage range: 200 V to 240 V Maximum voltage range: 176 V to 264 V Frequency: 50/60 Hz |
||
Fan | Fan speed regulating and alarm function | |||
Power Consumption | ≤40 W | ≤55 W | PoE: <810W (PoE full load) | PoE: <1570W (PoE full load) |
PoE Budget | N | N | RG-PA600I-P-F:370W(Dual 740W) RG-PA1000I-P-F:740W(Dual 1480W) |
RG-PA600I-P-F:370W(Dual 740W) RG-PA1000I-P-F:740W(Dual 1480W) |
Port lightning protection | 10kV | |||
Temperature | Operating temperature: 0℃ to 45℃ Storage temperature: -40℃ to 70℃ |
|||
Relative Humidity | Operating humidity: 10% to 90%RH Storage humidity: 5% to 95%RH | |||
Operating Altitude | 0m to 5,000m |
1. This content is applicable only to regions outside the China mainland. Ruijie reserves the right to interpret this content.
2. The value before the slash (/) refers to the device's switching capability, while the value after the slash (/) refers to the system's switching capability.
Model | Description |
RG-S5300-24GT4XS-E | 24 x 10/100/1000M adaptive electrical ports, 4 x 1G/10G SFP+ ports |
RG-S5300-48GT4XS-E | 48 x 10/100/1000M adaptive electrical ports, 4 x 1G/10G SFP+ ports |
RG-S5310-24GT4XS-P-E | 24-Port 10/100/1000BASE-T, and 4 1G/10G SFP+ Ports, support PoE+, max 740w for PoE, 2 modular power supply slots (at least one power module needed) |
RG-S5310-48GT4XS-P-E | 48-Port 10/100/1000BASE-T, and 4 1G/10G SFP+ Ports, support PoE+, max 1440w for PoE, 2 modular power supply slots (at least one power module needed) |
RG-PA600I-P-F | AC Power Module, 370W Power Budget for PoE, up to 24 PoE ports or 12 PoE+ ports (only for RG-S5310-24GT4XS-P-E, RG-S5310-48GT4XS-P-E) |
RG-PA1000I-P-F | AC Power Module, 740W Power Budget for PoE, up to 48 PoE ports or 24 PoE+ ports (only for RG- S5310-24GT4XS-P-E, RG-S5310-48GT4XS-P-E) |
Mini-GBIC-GT | 1000BASE-TX, SFP Transceiver (100m). |
Mini-GBIC-SX-MM850 | 1000BASE-SX, SFP Transceiver, SM (850nm, 500m, LC). |
Mini-GBIC-LX-SM1310 | 1000BASE-LX, SFP Transceiver, SM (1310nm, 10km, LC). |
Mini-GBIC-LH40-SM1310 | 1000BASE-LH, SFP Transceiver, SM (1310nm, 40km, LC). |
Mini-GBIC-ZX100-SM1550 | 1000BASE-ZX100, SFP Transceiver, SM (1550nm, 100km, LC). |
XG-SFP-SR-MM850 | 10GBASE-SR, SFP+ Transceiver, MM (850nm, 300m, LC) |
XG-SFP-LR-SM1310 | 10GBASE-SR, SFP+ Transceiver (1310nm, 10km, LC) |
XG-SFP-ER-SM1550 | 10GBASE-SR, SFP+ Transceiver (1550nm, 40km, LC) |
Ruijie Networks websites use cookies to deliver and improve the website experience.
See our cookie policy for further details on how we use cookies and how to change your cookie settings.
Cookie Manager
When you visit any website, the website will store or retrieve the information on your browser. This process is mostly in the form of cookies. Such information may involve your personal information, preferences or equipment, and is mainly used to enable the website to provide services in accordance with your expectations. Such information usually does not directly identify your personal information, but it can provide you with a more personalized network experience. We fully respect your privacy, so you can choose not to allow certain types of cookies. You only need to click on the names of different cookie categories to learn more and change the default settings. However, blocking certain types of cookies may affect your website experience and the services we can provide you.
Through this type of cookie, we can count website visits and traffic sources in order to evaluate and improve the performance of our website. This type of cookie can also help us understand the popularity of the page and the activity of visitors on the site. All information collected by such cookies will be aggregated to ensure the anonymity of the information. If you do not allow such cookies, we will have no way of knowing when you visited our website, and we will not be able to monitor website performance.
This type of cookie is necessary for the normal operation of the website and cannot be turned off in our system. Usually, they are only set for the actions you do, which are equivalent to service requests, such as setting your privacy preferences, logging in, or filling out forms. You can set your browser to block or remind you of such cookies, but certain functions of the website will not be available. Such cookies do not store any personally identifiable information.
Contact Us
How can we help you?